J-Tech Digital 1x8 HDMI Extender Splitter/HDMI Amplifier/ProAV Premium Quality Over Cat5e/Cat6 Cable up to 164 feet

There will be more to come on this product, but it is receiving 3 stars for now as I had a functioning unit for less than 2 months before the unit stopped working. Fantastic idea and I am hoping that it is just a bad main unit and I can get back to business. 3 stars became 4 stars after the very quick response by J-Tech. 4 stars became 5 stars after getting a replacement. The HDMI signal is making it to 3 TV's in the house perfectly! What you need to do. 1. Get Ethernet cables that can reach when you need them to. (Make sure they are using 568B. Easy way to tell is to make sure Orange is not in the middle, but all the way on the side.) 2. Plug your HDMI source into the Main splitter unit 3. Run Ethernet to all the receivers. (This is can be a test run that's not in your walls first for proof of concept.) 4. Plug in power for everything and enjoy the video and audio on every TV connected! This is what I did and this is how it worked out. I was able to watch the same source in multiple rooms. Super easy and it worked like that for about a month or month and a half. Now, I have submitted a support request to J-Tech to see if they can help me figure out why it will no longer make a connection. I understand that Quality Assurance can only do so much and that lemons exist. So, I don't believe that this product is just garbage. I'm hoping to get a new unit and be able to enjoy this unit again! Ethernet Cables You will want to make them or order them and verify that they are using the 568B standard. This is the second HDMI over Ethernet that I have had that required 568B and I'm not sure of the specific reasoning. If you are building cables or buying them to connect a laptop, desktop, or printer to the network, you can have the cable terminated with 568A or 568B as long as both ends of the cable are the same. With this device, it requires 568B on both ends of every Ethernet cable. ** 1/8/2016 Update Update to review as I did receive feedback directly from J-Tech and within a few emails, all within about an hour, they have provided me the RMA process. I am upgrading this review to like it as I understand that everything can't be perfect all the time. If a company is willing to actually work with the customer, then that is what is important. There just isn't any real way to have 100% Quality unless you are paying a lot for the guarantee. :) I will update again as the process continues. ** 1/20/2016 Update I have a fully working setup. I have combined this splitter to take an XB1 and push it to 3 different TV's in the house. Combined with a USB over Ethernet, I can run 2 Ethernet cables from the XB1 to wherever the TV is. 1 Ethernet cable handles the TV signal and plugs from the splitter to the wall attachment. The second Ethernet cable runs from a USB over Ethernet extender and plugs into a powered USB 3.0 hub by the XB1 and the controller by the TV. I have had some issues with power for the Xbox One controller and my put a powered USB hub by the TV so that the controller can get power. I can play games or push my Amazon Fire TV that is plugged into the Xbox One HDMI input to any TV in the house. So, one Amazon TV works all over. I'm currently theorizing adding another one of these setups. If I had an Amazon FireTV plugged into one splitter and the Xbox One with an Amazon Fire TV plugged into another one, I could setup every TV in the house to have 2 different inputs. One for the House Fire TV and the other for the Xbox One with its own Fire TV. Sorry, just theorizing and rambling. Long story short, this thing does exactly what I was hoping for and does it at an amazing price point. I can pretty easily highly suggest it. You may want/need it professionally installed and they give you wall plates to make it super clean.

I purchased the J-Tech Digital 1x4 ProAV Premium quality HDMI signal splitter/amplifier (9-20-17) to provide multiple remote viewing points for my home surveillance system. For my application, the longest overall length used is 110 ft of unshielded Cat6 patch cable and the signal is CRISTAL CLEAR! This unit split one source signal via HDMI cable from the Digital Watchdog surveillance DVR into four signals. I ran four different lengths of Cat6 UNSHIELDED patch cable; 25', 50', 75' and 100' from the base unit through the attic and inside the walls to each TV. (The cables where purchased from CableWholesale.com) Using RiteAV 1 Gang 1port Cat6 Wall Plates attached to Arlington LV1-1CS Single Gang low voltage mounting brackets (both purchased at Amazon). This made for a clean professional installation. Using another 10 ft of Cat6 unshielded patch cable connecting the wall outlets to the J-Tech receiver. Then it was a simple HDMI cable (purchased at Amazon) connection from the receiver to the TV. The system has been running continuously now for one week without any problems. If this changes I will update this post. For now, I am extremely pleased with the reliability and picture quality. I can't comment of the IR or other features this system provides since they are not part of my set up. I definitely recommend buying J-Tech Digital JTDHDEX1X4 ProAV Premium HDMI Extender/Amplifier/Splitter! Update: 9/11/23 Replaced two receivers due to lightning strike. The system has been running continuously since 9/20/17. Less expensive to purchase this entire setup than to replace the two receivers. HIGHLY recommend this product. Update: July,29, 2019 One of the four J-Tech Digital Receivers has failed. Model: JTDHDEX 1x4 Update: April,10, 2018 The system has proven to be 100% reliable. Highly recommend this product!

Installed quickly using existing Cat 6 cabling from earlier unit (different brand) which had failed after 4 years' use. HDMI splitter/extender worked as soon as I turned it on, feeding four TVs connected with Cat 6 cable varying from 30 feet to 75 feet. Excellent picture and sound. Source is an older DirecTV receiver HDMI output. For anyone installing this or similar units, I strongly recommend using Cat 6 cable. Cat 6 cable is shielded while Cat 5 cable is not. We had problems with static appearing on some TV screens with the earlier unit until we switched to Cat 6 cable. Cat 6 cables are available from Amazon at reasonable prices. I recommend the KabelDirekt brand available from Amazon. They're designed in Germany and made to their specs in China. Very nice cables. We started to experience "blinking" of the TV signal to our TVs. The picture and sometimes the sound would disappear for about 3 sec. and then reappear. This sometimes happened as often as every few minutes. A long series of emails with a very patient support tech at J-Tech solved the problem. He first had us check each component of our system: cables, satellite receiver, individual TVs and so forth. After discussion with his colleagues, he recommended that we set the receiver to the native resolution of all four connected TVs -- in our case 720p. This immediately solved the problem with no recurrence of the blinking. So, should you get a J-Tech 1x8 HDMI over Cat6 extender/splitter system, be sure that all the native resolution of all the connected TVs is the same (720p, 1080p, etc.). Then set the source's resolution to this value. This is done via the source's settings menu or similar. Recommended

Works as advertised. But don't buy it. Look at the reviews of products from J-Tech that describe very short lifespan. I wish I did....Had to buy my second one within 2 years. Its a shame that their products don't last. Ours is used for 2 hours each Sunday, and customer service from J-Tech wont stand behind their products. Shame. So If you buy it, expect to replace it again, and again, and again...... I would just buy a better product.

Worked as described! Just run a CAT6 Ethernet cable per TV a great set to reach TVs that are situated away with no signal degradation. Love the PoE feature of the receivers. I just plug my HDIM into it and voila! up to 4 TVs are ready to show my Karaoke lyrics or Music videos.

Have purchased 3 of these. Only I have had is the remote cat5 to hdmi modules going out. I lost one on the first system in about 5 days. The other unit I purchased, a module went out within about two weeks. I just purchased a 3rd system and it is working. One each of the systems I purchased. I only needed 3 of the 4 modules, so it worked out okay for what I was doing. If I had been using all 4, I would have been in trouble. I give it 4 stars because it does the job well and I have not had a single issue in getting the HDMI signals to remote screens... as long as the modules are working.

I swear by these. I’ve gone over 250 feet with these and have linked these back into another switcher and kept going. I’m an installer and these have been my jame for 6 years now. They have also upgraded the box to no longer need power once it converts back to hdmi. The converter box can be powered by just the cat5. Literal game changer.

I love this device. We have 8 security cameras at a facility. They can be monitored in the office where the control box is located or on our phones. However, there are other offices in the facility where it would be desirable to see the camera images displayed without having to use our phones. This device makes that very possible. This is a 1 to 4 device. However, they have added an HDMI output port on the main box so that you have a pass through for the initial camera control box location. So, it is actually a 1 to 5 device with 1 local connection and 4 remote connections. That feature in itself sold me on the device. Installation is super easy as long as pulling the Cat6 cable is an easy task, because that is the hardest part of the installation. So, depending on your facility, the wire pulling may be simple or difficult. However, once the wire is pulled and Cat6 connectors are installed on the ends, connecting the remote devices is just a matter of plugging the various cables (Cat6 cable, HDMI, and power)in. We pulled the wire to four separate offices and did the connection and everything worked great. Now we can monitor our security cameras from five different locations in the facility. Problems solved.

Funcionan a la perfección, no hay un solo problema. Sin duda lo volveré a comprar, por el momento no tengo fotos pero trataré de subir unas.