Instant Smile Complete Your Smile Temporary Tooth Replacement Kit, Broken or Missing Tooth Repair Kit, Bright White Natural and Dark Shades, Patented, 40 False Teeth

This is the biggest waste of money EVER! Supposed to come with little beads. Mine arrived with a block of the glue. Tried about 10 times to attach one tooth. Absolutely impossible. Avoid and don't waste your money on this rubbish! Just thrown it all in the bin!

Actually does work! May take you a few attempts but I got it right eventually. Don't use too many beads. I use ten. You need to do it fairly quickly before the gel gets too hard but you can reheat the gel as many times as you need. Pick the nearest tooth size (or use provided file to resize) and place the gel in the middle of the rear of the tooth. Place the tooth in and squeeze the gel until it spreads slightly over onto the adjacent teeth. Try and keep the gel from going on the front of the tooth. Manipulate if required. Once happy hold it in place for about sixty seconds. Let it harden, I find it takes about two minutes or so. You will get better at each attempt and I now have one which I can insert in and out at will (make sure you wash it of course). I take it out for eating but it is fine with hot and cold drinks. Works well enough until you can get to see a dentist, which is not easy now a days.

The beads were ok but not the actual tooth couldn’t get it to stay on

Not very easy to use. Doesn't work for me.

There is nothing nice about this product. It all looks great on the picture, but the reality is a whole lot different. So I needed to replace one single upper front tooth. However, the temporary tooth/teeth were much too small. Waste of time and money.

So I have my 7th and 10th teeth missing currently and I'm waiting for my dentures to arrive(a good few weeks away). I wanted something just to fill the gap so I could speak to people without feeling embarrassed. I came across this Instant Smile and thought that would be exactly what I was after, but as I was reading the reviews it looked like it would be just a waste of money. I noticed a few reviews mentioned about getting the setup right for a good fit etc. They're right, I brought it with the intention of just seeing if it would work because at this point I would have took anything to help with my teeth and the gaps. I followed the instructions and took my time, to my surprised they fit really well, you wouldn't actually be able to tell which ones were fake. Not only that I was able to replace both of my teeth, which I didn't think I'd have enough for but it did! Of course it's just an appearance item the replacements won't be able to help you chew food at all. But for covering missing teeth they worked a treat. Would buy it again, if I had to but mine are holding up well.

One has to have dexterity to manipulate this kit. Whilst the teeth are well made. they are very fiddly to hold and for someone with large digits not easy. Overall I did not manage to hold shape or form the shape I needed and gave up. It is an expensive mistake to make but worth a shot. If one checks on TEMU you can find this for around a fiver..I should have looked before buying. One learns!

Good for a quick fix on a hidden tooth, not enough polymorph beads even though they are reusable they dont really go back to clear when melted again. Can be quite fidgity/messy, need to try and keep trying so make sure you have the time.

Muy realistas

It took a long time to master how to make these for my mouth and my teeth but once I did get it down I think that they work very well to make my teeth and smile look better I don't have any missing teeth in the front on the top but these make my teeth bright white and very straight and I like that make sure to not use a lot of the plastic beads less is more I repeat less is more you can trim off the excess the less you use with beads the easier it will be to learn how to speak with them without having a speech impediment make sure to get them pressed in really good so they don't slip out using mirror when putting them in and do not get any on the front because once the beads get melted on good they're on good. Another tip is try using a hot blow dryer and remember that if you get them in properly people won't notice unless you tell them more unless they know you but just try it out and see how you like it and don't feel like everyone can tell because I think they look good and my teeth aren't even that bad I just like them. I can make them with barely any beads and have it to where they just click right in I take them out when I'm eating and I just really like stick them in my pocket or something or down my blouse LOL and then I can go and mouthwash brush my teeth and then go put them back in in the bathroom whatever and no one really notices but I think they kind of give my smile a very classy bright makeover. They do get kind of gross like ewe if you don't take care of them brush them remove them when you eat although I can eat with them in my mouth if I wanted to I just don't so that you don't get gross I would buy a couple pairs if I were you if you end up liking them but it just takes a little bit of trial and error some people like the the color that's slightly less white myself I prefer the extra extra bright white I mean who wouldn't want a bright bright smile but it is outrageously bright like that Friends episode. It took me years before I figured out how to get them looking how I like them and still they are only temporary so I make them when I lose them and I also make them when they need to be replaced so it's not a permanent thing whatsoever nor is it something that you should wear all the time just maybe like you know special occasions or what not you know and I would definitely take them out if you're going to do like a deep makeup session LOL but I don't know that's up to you. I could go on for days about tips on how to make these right for your teeth and another tip that I would give is that I take a Dremel and I slightly Dremel back Dremel a little bit of the teeth it's themselves off of the back to make them fit closer to my teeth but you want to make sure to not Dremel and remove very much of the teeth between where the teeth come together because they will break off and you will have two pieces instead of one which are more difficult to make into a nice solid removable temporary dental piece so lightly Dremel the inside part of each tooth before you put on the beads. Any missing teeth that you have take advantage of that and use that as a way to anchor it in better if you know what I mean . Every little bit of space counts when you're making one of these it can be just a fraction of a centimeter that makes them look like horse teeth in your mouth like way too big or looking like maybe you just got your lips done like some Botox so just remember like every single fraction of an inch on the front makes a difference between it and looking like horse either regular teeth I know I repeated that but that's a really important part so good luck with your teething adventure if you will. Don't give up trying and use your mirror use your mirror and of course you got brush for brush really really good first they go on better dry the wetness from the water when you put it in the boiling water and then you try to put them on the water will actually make them not adhere whereas a blow dryer is going to dry them off and make them stick better okay I think I've thought of enough tips for you to have success again good luck

bien

Enligt beskrivning, snabb leverans, tydliga instruktioner mkt nöjd

Je zal misschien meerdere keren moeten proberen om de plastic tand te plaatsen en vast te zetten met de bijgeleverde 'beads', dat zijn harsbolletjes die smelten als je ze verwarmt. Dan kan je ze kneden en zo je valse tand vastzetten, want als ze afkoelen worden ze hard. Maar de kleine hoeveelheid daarvan laat slechts 2 à 3 pogingen toe. Dat je ze opnieuw kunt gebruiken als je pogingen mislukken, klopt niet helemaal, ze hebben dan niet meer dezelfde kleefkracht.