upHereGS05BK Black Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket,Adjustable Length and Height Support

Installed a raijintek morpheus ii on my 1080 graphics card. The GPU is much heavier because of this.This brace easily supports the weight, looks decent, easy to install, no issues.You DO need 3 PCI slots worth of space below your graphics card. So make sure you have room.Those that have the raijintek morpheus ii, this brace 100% works with it. Just put the support from the brace on the middle meeting point of your two fans.

I say less conventional because I did use them as GPU supports for 2 different systems, a job they do well, easy to adjust and 3 point contact for the base BUT I took the RGB strips out and put in some cut-down strips from a set with proprietary connectors with the fan kits iinstalled in those systems. I then to those addressable strips that came with the brackets and put them in a different system as general RGB strips off to the sides. Not only do the custom jobs look great, but the strips were easy to work with and can daisy chain and look great. That's why I did not include pictures, because some people will see something that is NOT what they purchased and probably won't read this and get pissed off haha but they are great supports, great RGB and easy to open up and mod for proprietary setups

It's perfect for the money, came with 1 dead LED but it's not a big deal you can't notice it unless you're really staring at it because of the diffuse plate. It's going to work great and keeps some weight off my PCI-e slot when my triple slot GPU is installed.Pros:Thicker than I was expecting, pretty sturdy design.Comes with long thumb screws so you can keep your PCI-e covers on, or install a smaller card behind it(e.g Wifi, NVMe Raid Card)Addressable RGB is great, syncs perfectly.Comes with Rubber pads for vibrationsNo SATA Power needed(idk what some of these other reviews are talking about)Slider can be adjusted on both an X and Y axis.Nice quality packagingCheapCons:Has one dead LED(Not really too noticeable though)RGB is a little less saturated than my RAM and Fans.Slider is a little bit stiff when moving up or over the first time.Sits slightly crooked with weight on it, like 2 degrees not a big deal, barely noticeable.

Installed this brace support for my video card and seems to be holding up great so far.The item itself is very robust and does not flex at all. It looks great inside the case as well. I'm happy with this product.

For the price this can't be beat. Its simple and easy to install. For those saying they need to bend the bracket to work with an EVGA RTX 3090 FTW3 Ultra Gaming GPU, you do not. As another reviewer pointed out, just move the stand back to the middle of the card. The center fan is offset back from the other two and the stand will fit perfectly in that spot and not interfere with any fan operation. I can only show the rgb working through EVGA Precision X1 software. Since these cards come with a 5v header I just plugged it into that and the color representation has been spot on. Since the bracket does not have a support back to the motherboard (if it did, I would not have bought it) it can be a little wobbly but once you have it set where you want it, it will remain there. Now, if you are one of those people that still lugs their desktop gaming parties then I suggest a little super glue on the rubber pads. As others have stated, these things just fall out. I think in one of my pictures one had already moved out. I reset them and they are remaining in their spot now but I would expect to find them in a fan if I had to move this big case to another room. All in all, easy to install and looks great and at a third the cost of the Cooler Master stand, its a steal, especially if you have fans on the bottom and cannot use a regular post stand.

The product overall is decent quality and the RGB works just fine on am X570 Asus Dark Hero board. Here's the 2 issues I ran into and why it's not a 5 star for me and this card.1) it doesn't line up well anywhere good with the 3090 Evga ultra. Had to bend the product slightly up towards me so i.could get it to align above th fans. It did not line up and the bracket piece would end up into the fans somewhere.2) the Rubber spacers/protector they come with simply fall right off and held no purpose to my needs since it wasn't a flat area where I had to bend up the bracket and make it so it aligned onto a side point made these rubber things want to fall off and had to pick them off my motherboard a few times before I decided to not even use them.Overall decent quality and should work well for those that have a more flush service and not fans In the way and having to bend a product to rig it yourself to work.

I didn't currently have any kind of problem with GPU sag, but I also didn't want to have to worry about it later on. So to stay ahead of the problem I decided to get a GPU support bracket. I have an EVGA GeForce RTX 3080 FTW3 Ultra. This is not a light card by any stretch of the imagination. I first ordered a different bracket before ordering this one. The previous was the same brand and still with ARGB, only it was ABS plastic. This one is either painted steal or aluminum. Not sure which. But it has some weight to it and it is very sturdy. The best part is the fact that it screws into the expansion slot bracket screw holes. Looks great and it isn't one of the those "stands" the others are using.

Please spend a little more and get some other bracket. It seemed like a great deal at first with RGB and all but I now realize it is very poorly designed. A lot of issues during installation. The best part, I tightened all the screws firmly myself and whenever I put my GPU weight on the bracket, the bracket starts sagging along with the gpu lmoa. No point buying this. Look somewhere else!Update: this bracket's support actually is in such a place that it starts bumping into the gpu fan. I have tried all possible spacings and it doesn't work. I realized this after 2 hour gaming session with my headphones on after my computer was making a very bad sound. Please do not buy this, it will potentially damage your GPU!

Esperaba un poco más d calidad, no te da el 100% esa seguridad q buscas para la tarjeta grafica, es buena opción dentro de lo económico, el rgb es bueno.

El producto funciona a medias, permite compensar un poco el estres de la tarjeta grafica, termina sediendo al peso de la misma. Como soporte cumple a medias. Muchos se quejan del RGB pero en lo personal eso no tiene importancia para la función que debe desempeñar y es el de dar soporte a la tarjeta de video.