KRAUS Oletto Single Handle Pull Down Kitchen Faucet in Spot Free Antique Champagne Bronze, KPF-2820SFACB

Easy to install. Fit, water flow, spray feature all perfect. Really sharp looking compared to the old one! Operates extremely well and like an expensive piece of hardware! So nice!

This is the nicest faucet I've ever had - design & function. The 'best of' reviews are correct! The pull-down is easy to use, easy to direct the spray. Low flow actually works! The control handle is easy to turn on or off with just a finger; nicely placed too. The clean design & stainless steel look great and it's easy to use. I'm afraid this is turning into a glowing report, but I'm pretty impressed, & no problems! I didn't install it but the plumber said that install was easy (I also got a new disposal, which he also installed; that made it much easier to install the faucet. Great plumber!)

Installed a few days ago, and so far, it works perfectly. Works as good as more expensive faucets I’ve had in other homes. Like the slim non bulky design

Very happy with it so far, great pressure And looks great with the kraus drop in sink I installed. Weight has to be placed properly for it to retract

I'm going to break this review down into 3 sections. What I LOVE about this faucet. What I LIKE about this faucet - and what can be improved upon with this faucet. Then a solid recommendation if you should buy this one or something else. First off, I want you to know that I've owned a few different brands of these touchless faucets... Moen and Delta are both household names and I've owned them both. But let's face it... If you weren't concerned about saving money, you wouldn't be on a Kraus Oletto's reviews-page. So, since you're here I'm going to assume you don't have money you'd like to burn. What I LOVE about this faucet: the color is a perfect match for what I was hoping for. It's also excellent quality and built well. I also loved the fact that is was easy to install and only the most basic knowledge of plumbing was necessary. And, I also loved the price-point Now to what I LIKE about it: It shipped quickly (in hand two days after ordering) and it was well packaged. It even came with the batteries for the sensor control box. I also like the fact that they specifically tell the installer where to place the weight so the nozzle gets back into place quickly and decidedly. However, there are several areas where this faucet could be improved. 1. There is a distinct delay from when you have your hand over the sensor and when the control box allows the water to flow. So much so, that you think the sensor missed your hand movement and you repeat it only to find it was sensed the first time and you just shut it right back off. The second thing that's a bit bothersome is that the physical handle must be in the "ON" position for any water to flow. In other words, the sensor ONLY starts or stops the water when the handle is set to the "On" position. If the physical handle is in the "Off" position when you swipe your hand near the sensor, you'll hear an audible "click" but no water will flow. The more expensive brands allow for water to flow whether the handle is on or off. So, would I buy this faucet again?? Absolutely - in a heartbeat. I can learn to live with the handle having to be in the ON position to get water. It looks high end, it's easy to install, and is solid. This is a definite "Buy" recommendation! But are there things they could improve upon?? Yes, that's true too. But for the price, it's a great grab!!

The Kitchen Faucet is very easy to install, less than 10 minutes, it looks very modern and elegant. also it doesn't get water spots easy so it always looks clean.

Beautiful, well made. I bought on amazon resale… nice looking. Does not use a magnetic docking system.

Firstly, all of the parts were in the box (great start) and the directions shouldn't really be necessary, but they were pretty thorough all the same. The manual was helpful, if for no other reason than to supply the part number for the replacement cartridges (years down the line you may have to replace the mechanism inside the handle) and it's the only way I would have found out that THERE IS AN AC ADAPTER AVAILABLE! Supposedly the batteries last 18 months. That's about 6 years too short in my opinion. I'm sorry, I don't want to fuss with batteries for a faucet. I have tools and know how to use them. Changing the faucet itself would have taken a little less than an hour (removal + install) except I had to replace a dodgey supply valve first. Thank goodness for sharkbite fittings (who-ha-ha). So, two things regarding install. Get yourself some blue threadlock and use it on the two screws on the underside of the sink. The number one complaint about these single post faucets is they get loose over time. This threadlock should stop that, but the blue is removable. Red threadlock however will be an absolute nightmare, and is unnecessary. Functionality: Our old faucet made you choose between freezing cold water or visiting the burn unit. This valve is delightfully forgiving. One thing I misunderstood about how the faucet works is the automatic feature. To use the automatic feature, you set the temperature you want, leave the handle in the "on" position, and use the sensor to turn the faucet off. I thought you could use the handle or the sensor to turn on the faucet, but that is false. You can disable the sensor and use only the handle or just use the sensor. I just finished installing ours an hour ago, and we're already getting used to it (lots of automation in the house), but it will be fun to see people fumble with it who visit rarely. This is a water-saving faucet, but you would never know it. Our old faucet would have given young Greta Thunberg a stroke. It dumped so much water, but frankly, the pressure is higher with this focused spray nozzle. Blasting food from dishes will be easier. The supply lines are 3/8" compression-style fittings. This is the same size as my supply line. Locally, the only 3/8 - 3/8 braided supply line I could get is female to female (specifically, a dishwasher kit), but the connection from the faucet is also female. Fret not. You can go to the orange box store and get LFA-110 3/8 in OD coupling ("in" is inches, and this needs to be brass) or get a few extra here: https://www.amazon.com/ZKZX-Compression-Connector-Straight-Coupling/dp/B08TVMPZVN/ref=sr_1_3?crid=39C59MR01OOVZ&keywords=3%2F8%2BOD%2Bcoupling&qid=1704941759&sprefix=3%2F8%2Bod%2Bcoupling%2Caps%2C83&sr=8-3&th=1 (ASIN = B08TVMPZVN) Update: It has been about seven months, and we still absolutely love our faucet. There have been no malfunctions as of yet, and I have since installed another for a family member. They have been equally happy with it.