2-in-1 iPhone + Apple Watch Masafe Charger Stand, Aluminum Alloy (BLK)

This is a review of the best iPhone and apple watch stands. Do you want to tame your mess of iPhone and Apple Watch cords? Read until the end to find out the top pick! All of the chosen stands provide very nice options to hold your phone and Apple watch charger. They are all about the same price except for one. EWA 2 in 1 Magsafe Charger Stand If you already own a Magsafe charger this is the item for you Pro: Uses and perfectly holds Magsafe and Apple Watch charger pads (Full fast charging) Most reliable due to use of Genuine Apple chargers Can always replace a charger pad or take one out for travel Clean all aluminium build with a beautiful finish Conceals wires nicely Hold phone at a nice angle for use while charging Inexpensive way to incorporate Magsafe into a stand and clean up wires Con: Not a big deal, but you have to assemble it with 4 screws. Base could be heavier and slightly larger. When removing phone it lifts with the phone. Belkin MagSafe 3-in-1 Wireless Charger, 15W iPhone Fast Charging, Apple Watch, AirPods Charging Station for iPhone 13, 12 The ultimate is the Belkin, its also the most expensive. $120 - 150 Pro: Clean elegant design Simple 1 wire plug in to the wall. Don’t need to buy anything else. Full 15 Watt fast charging via wireless. Most others are only 7.5 Watt. Charges Magsafe phone, Apple Watch, and wireless AirPods simultaneously Its also sold on the Apple web site so you know its fully tested and high quality This thing is awesome if you can stomach the price and don’t need to charge an iPad or older device. Con: Expensive Plug in options: Macally Apple Charging Stand for Apple Watch and iPhone and AirPods Pro: Very clean and elegant design that conceals wires and heavy base Uses standard Apple plug in cables for reliability Holds cables very sturdy when inserting and removing devices Holds apple watch and AirPods perfectly Perfect for a bedside (tap your bedside table and the apple watch illuminates the time). Awesome Con: iPhone is angled almost straight up and not suited use of the phone while charging. If you want to use your phone while charging this is not the stand for you Can not charge a iPad with this stand. It won’t fit HoRIMe 3 in 1 Aluminium Charging Station Pro: Sturdy base Great for using phone or iPad while charging Universal for any phone or tablet Wires clip in though the back cutout, this is nice so you're not searching for them Con: Not very elegant Apple Watch lays on its side Doesn’t hold AirPods charge plug very well when removing. Pulls out of the holder Lamicall Stand for Apple Watch Phone Holder 2 in 1 Pro: Universal for phone, iPad, and apple watch Tilts to any angle, works great while using phone or iPad while charging Apple Watch charger folds out of the way. Great. Small and foldable for travel Wires are held in a clip on the base Con: Only 2-1, doesn’t have option for AirPods I really like this one for its simplicity, and fold away watch charger Lamicall Stand Suit for Apple Watch If you just want to charge your apple watch then this little stand is great and at $12 it won’t break the bank If you made it this far, Congratulations and thanks for reading! Bottom line: The best plug in stand: Lamicall Stand for Apple Watch Phone Holder 2 in 1. Its just fits my needs the best. Universal, works for multiple devices, and folds for travel. The best Magsafe charger: Belkin MagSafe 3-in-1 Wireless Charger, 15W It works fantastic, heavy base, charges phone, watch, and AirPods simultaneously. Looks beautiful on a desk or bedside and has a simple 1 wire wall plug.

I was looking for a charging station that would allow me to use my own MagSafe chargers. I like the improvements made to the way the cables are routed and the way the watch charger sits in the holder. I picked this station because it would allow my watch to face the same way as the phone allowing me to use it like an old style digital clock. The only thing that I personally find wrong with it is on the rare times I remove the phone from the charger by lifting the left side of the phone the charger starts to come out of its holder. It comes out just a little bit. The Apple MagSafe phone charger fits snug but the magnet is pretty strong and don’t see it getting a tighter fit without using screws to anchor it. I just lift the phone from the right side and the problem is solved. The price, functionality for my needs, build quality, and style are all great.

Inexpensive, well built, and practically no chance of failure. Because you need to use the OEM Apple chargers in the unit there is little chance of having an electrical failure and the magnetic hold is OEM quality. There are no electronics in this stand. The unit is well made, sturdy and very stable. While the Apple Watch charger doesn’t stick out as much as other charging stands I’ve tried, I had no problem getting my watch to charge. The only two minor issues that I have with it are: 1. You can only charge the iPhone 12 Pro Max in portrait mode while your Apple Watch is also charging. If you try to charge it in landscape mode there isn’t enough room. (See Picture). It shouldn’t be problem for the other iPhone 12 models. 2. You end up with two wires coming out the back which need two USB ports to plug into. I Initially purchased a more expensive (2.5x the price) 3-in-1charger that was of similar design, but had the addition of a wireless earbud charger pad. That model which is available on Amazon under many brand names is very close to the OEM Apple/Belkin charger design. But after a month of use the iPhone charger pad stopped working. When I investigated the problem, I found that the heat from the earbud wireless charger had melted the internal wiring which caused the failure. While I could have received a replacement, I think the same failure would occur again if I were to use the wireless earbud charger regularly, since it did always run hot. If I were to forgo using the earbud charger why spend 2.5x the price of this unit when I already had the OEM chargers.

Good quality

Nice sturdy stand but be prepared to have a friend help you put it together. Four tiny screws that difficult to install and near impossible to hold two parts together while you try to screw them in. This occurs twice to get all the parts together. My wife helped and we got it done. Oh yes…and you’ll need good light, steady hands and 20/20 vision are essential. Once thru that you’ve got an attractive stand. Hopefully over time the screws will hold in place as they are very tiny.

A lot of the other MagSafe iPhone + Apple Watch stands have a combination of proprietary chargers, high prices, or 3D-printed plastic. This was the first one I came across that avoided all of those pitfalls. Since Apple only allows MFi MagSafe chargers to charge at the full 15w, most of the MagSafe stands on Amazon to peak at 7.5w or maybe 10w. Belkin has a $130 (!!!) charger that charges at the full 15w, but for those like me who don’t want to spend that much, this stand uses your existing ($34) MagSafe charger from Apple. Make sure to use the 20w wall charger from Apple to actually get the full 15w via MagSafe. At $20, I was not expecting quality, like the cheap silicone flat-stand I was using before this, but I am very impressed. It came in a small box, and putting it together was easy though there are no directions. The thick-head screws go into the base, and the thin-head screws go into the top. The included Allen wrenches are welcome, but it’d be better if the screws used the same size instead of needing two different wrenches. The base has sticky spots to stay put when pulling the phone off the charger, which is fine but may not be for everyone. It’s made of a sharp-looking aluminum alloy, which I hope means it will last a long time. The description and photos don’t do the look justice; the edges & corners are all polished to a silver shine, and are striking against the deep black of the base. Overall, I’m very impressed for $20. I wish the base was weighted instead of using sticky tape to stay put when pulling the phone off, but I’d imagine having to pay $50+ for that. This will do.

(Here’s the photo I received after I gave it to my brother as a Father’s Day gift .) He had recently gotten an Apple Watch so I knew right away that I wanted to get him a charging station. I spent a LOT of time researching different charging stations and I found that even some the “best” stations out there can have issues with charging after a few months of use. I figured even with this one even if one of the chargers fail, the recipient can replace the chargers and keep using the stand. So, I pulled the trigger and bought it. And I which brings me to the only con that I have about this product. After giving this as a gift and my brother opening it I realize that he had to put it together piece by piece. Don’t get me wrong, it wasn’t hard nor did it take up much time but still.. I don’t really like giving a gift that somebody else has to put together. But still worth every star in my rating. It’s metal, (which gives it a natural weight & nice feel,) seems very sturdy and has a simple, modern look, And I was told it was very simple to feed the Apple chargers through it. To be honest, if I had my own Apple Watch I would buy one for myself! Great product, my brother loved it which made it a very successful gift, Worth every penny!

With my iPhone and apple watch and the chargers it was very chaotic on my night stand and I looked though Amazon for some type of solution I saw a few stands but that came already with chargers I know from experience these cords do not last and so you will be back to square one. When I saw this one I got a little excited because you could use your own apple pucks and it was metal, I just hoped it was not cheep metal and too light and fall over. Well I got it and yes it was a little confusing putting it together with basically no instructions. Once together it is really sturdy and now my second concern will it hold my phone with a cover on it. The magsafe magnet is not very strong or has a strong bond with the cover on. To my surprise the phone stayed and the apple watch I had no concerns with it. The cords go neatly behind it.

4 vis (6 fournies) 3 pièces à assembler 2 modules de charge de la pomme 1 ensemble très qualitatif et stable

Nice and compact Great for travelling

Produkt super jestem bardzo zadowolony polecam

Para mi esta bastante conseguido el material, el diseño y por poner un pero pequeñito el cable que va de la base a la viga por así decir podría estar mejor pensado para que el cable se ponga solo perfecto, aún así si eres algo detallista lo haces por tu cuenta a la primera

It does what it suppose to do. Easy to assemble and Apple MagSafe and the watch charger fits perfect. It’s sturdy enough and it’s almost glued to my bedside table.