Graphics Card Bracket, JEYI Universal VGA Graphics Card Brace GPU Support

I have an EK water block and metal back plate on my 3080. Even without water in it the thing weighs slightly over 4lbs (just shy of 2kilos for my metric readers). Filled and with the three power cables attached there was considerable sag in the card when installed. With the support added I have eliminated pretty much all of the sag…to the point where I actually need to go back and drain the loop and shave off some mm from my rigid tubing to adjust to the new position of the card.The support is very small and unobtrusive; about the length and width of your pinky finger. The tip that pushes against your card is a firm yet slightly soft pad that will prevent slipping and/or scratching. The bottom end has a small magnet in it with some kind of adhesive over it.Adjustment to length is done by slightly loosening the red locking nut which allows the bottom end to be backed out to the desired length and then locked into place by retightening the nut.Pros -Very easy to useVery secure/strongVery small and unobtrusiveCons -Locking nut is painted red as opposed to a neutral color like black or grey which may be more universal considering the diversity of rigs and color themesCompletely unnecessary “this end up” text along side of support that should have been a simple sticker as opposed to being etched into the metal***Bottom end with magnet is garbage; the adhesive pad placed over the magnet bottom looks cheap and feels gooey. I picked at it with my fingernail and it moved around like a loose tooth. I am guessing it wouldn’t take much for it to be pulled out of the bottom of the support and be glued/stuck to your case.Final thoughts: The product does what it was advertised to do, which makes me happy as I am finally able to look at my build without my eyes being drawn to a sloped graphics card. I just don’t understand why the designer chose to etch unnecessary and unflattering text along one side of it and why they chose to put such an awful gummy pad and magnet on the bottom. The magnet is completely unnecessary; there is never going to be a setup in which someone needs the support to be held in place by a magnet. The gooey sticky pad is also an awful design choice as no one who spends hundreds or thousands of dollars on their nice custom rig is going to want gluey adhesive stuck to it. The designer could have instantly made the product perfect had they just used the same non-slip rubber pad that was used on the other end of the support. Not only would it have gotten rid of the nasty gooey bottom but it would have also allowed the user to use either end against the graphics card AND gotten rid of the unnecessary and unflattering text that was etched along the side of the support telling you which end goes up.

This item does exactly what it is supposed to do which is support the GPU and prevent sagging. Since installing, I have moved the case plenty of times as well as put it on it's back and this brace has not moved and stayed in place.Definitely recommend.

Solid piece of metal with a magnet on the bottom. Only downside is the price.

Fit & works great!

Works well with my 2080 super

Holds up my 3080 with no problem

Fácil de adaptar al chasis h la altura de la tarjeta gráfica. Perfecto para evitar que se deforme. Contento

The padding got loose after just one try. You need to make sure you place it where you need to the first time. Otherwise, if you need to play around to find the sweet spot under your GPU, the sticky padding gets all messed up.Once it is in place, it will remain there and hold your GPU nicely.