Ubrokeifixit for OnePlus 8T Housing Rear Panel Back Glass Door Cover Replacement for OnePlus 8T 6.55"(NOT for 8 6.55",NOT for 8 Pro 6.78") (8T 6.55"/Green)

I'm not sure if this is glass like the original but the texture feels the same. The camera lens cover is included. All markings are identical with exception to the IMEI missing from the back....but that's expected as it is unique to the device. I didn't use a heat gun or blow dryer, I used a space heater....just another option if you aren't a person with beautiful flowing long hair or you're also not a mechanic or electrician. You might also get away with wrapping it in a heating pad. The point is, the back needs to be warm enough to soften the adhesive on the old back. Just take your time and it will come loose. Be sure to take care in removing any left over adhesive. The replacement back uses the same adhesive. Make sure to remove the lens cover protector plastic before install. ****it's a good idea to add a little heat to the replacement as well to ensure a good bond***. I'd also recommend after seating the back panel, lay it flat with heavier items on it to put pressure on the back and seat it flush. Again, make sure all old adhesive has been removed or the back will not be flush or bond correctly. One thing that threw me off was that it all came in what looked like a screen protector box. I was concerned that there was a mix up until I opened the box. Everything was there. Just a heads up. Fit and finish is spot on.

I'm actually really loving this new look. The back "glass" is more of a soft plastic that feels nice in the hands, it's silky smooth. I prefer it more than the original glass which means this doesn't feel like it will crack easily. Of course, I don't know how it will hold up long term but I love the look. Hardest part was cleaning the sticky residue off but with an alcohol prep pad, it comes off easily. I would 100% order this if your back glass has cracked and you're into the electronics and want to display the components inside.

Its a pretty good kit for replacing the back of your phone. It has good adhesive, and also the exact tools you'll need to take off the old back cover besides a hair dryer. However, I forgot that it came with tools to remove the old one, and instead used a screwdriver and random card to pry it off. When I opened up the box to put the new one on, I realized that the process could've been a lot quicker!

Update: more fragile than OEM, broke in a couple days I plan to try again with a hard case. It looks really good and comes with some decent tools to pull off the old back. Mine was broken so I didn't have to be too careful. I didn't have a heat gun so I used a ziplock bag of boiled water as a hotplate and the metal guitar pick tool got in there really easily. The new back went on without any hiccups.

Back of my phone cracked even though I had it in an Otterbox base. Thought I'd give this a try before paying hundreds to get it fixed. I also ordered an $18 heat gun, though I've heard you may be able to get away with a hair dryer. After warming up the glue, the back removed with some effort. I took a little extra time to gently scrape off the old glue so that the new stuff would stick better. Removed the backing on the new glass and applied to the phone. Used c-clamps with a towel to gently hold it in place (don't crack your glass!). It looks brand new and it's sealed nicely. I'm so happy with this $20 fix. We will see how it holds up.

The glass is very fragile, and broke into large shards even with a short fall in a case. This is not a good replacement back if it breaks that easily, and with the way it breaks there's no way to leave it in place until a replacement arrives so I now have to deal with my phone just not having a back on it.

It fits perfectly and has all the logos like the original fairly easy installation as well took about 25 minutes and all I had was a hair dryer instead of a heat gun! A month later still holding well too!!!!

This was supposed to be a replacement for my son's OnePlus 8T phone it comes with all the tools and if you have a hot air gun or a heating pad you can remove the old one with the suction cup or you can go and pay somebody to do it for you

This replacement fit perfectly on my OnePlus 8T. The fit and finish are excellent. This replacement glass back has a ring of black self adhesive material around the perimeter to stick it to the chassis. I used T-7000 black adhesive to help seal it even better.

No cuenta con el logo y ni con el nombre de oneplus en la parte externa de cubierta trasera que adquirí; decepcionado de la compra, tendré que devolverlo.

Colour is not an exact match but you don't really notice it once the old back is discarded. Easy enough to replace, having watched a YouTube tutorial (search OnePlus 8T back glass replacement). Only used one of the triangular implements sent in the pack to help remove the old cover, the others are not much help. Used my own hairdryer to warm the back, Stanley knife to remove old adhesive and a pair of tweezers to remove the plastic protectors over the camera glass. In my photo I have transferred the white sticker in the middle of the case from the old to the new one. All in all the replacement took me about 30 minuutes.

Chegou no prazo estipulado, veio conforme anunciado, mas só pra resaltar a capa é de plástico ao invés de vidro igual o original, pelo valor, sinceramente? tá bom!. N vai interferir em nada. (Sim eu compraria dnv).

Es una tapa muy frágil por casi 500 con el envío para nada la recomiendo, muy difícil encontrar un buen repuesto