Siraya Tech 3D Printer Resin Sculpt High Temperature Resistance (Clear, 1kg)

Perfect brand and perfect quality. High detail printing with that Resin.also its High temperature durable good for moulds

This prints very well, surprisingly I have not had a fail print with this and I've used 4 bottles of this products, just be carefully and after you printed and cured it can be very brittle and break

First time using this resin. 100% success from the first print. Used recommended settings on chitubox. 9 hour print. Let's hope this high temp resin stands up to a hot engine bay environment and doesn't distort or crack. I'll add a follow up in a few weeks after testing. So far so good.

Using on a Photon Mono, I found this needed about 50% more exposure time than a standard resin. It is an absolute nightmare to clean. IPA just doesn't seem to touch it on t's own or in the cyclone of a wash & cure machine. I've tried brushing it off and then hairdryer-ing it as recommended by Siraya Tech but nothing actually results in it being less sticky. If you can get it clean then it does seem to be good solid stuff, though since It's nigh on impossible to get clean I've taken to mixing with standard resin just to make use of it.

I was warned this is tricky to print with, but apart from ensuring the temperature is kept to a minimum, it seems no more difficult than anything else I’ve used. I had one initial failure, mostly because of my rush to place supports, but have since printed several items with no issues. Good detail and exceptional dimensional accuracy. I cannot fathom why, but I also use less of this resin for the same models printed with another product. Weird, but good!

Résine épaisse, super pour faire des moules pour injecter de la résine, résistance à la chaleur au top. Une super marque.

Habe das Resin heute bekommen und gleich losgelegt mit dem Drucken. Was soll ich sagen habe genau die Anweisungen vom Hersteller befolgt und sofort beim ersten Druck erfolgreich gewesen. Mal schauen wie es nach dem härten wird.

La compre para hacer moldes de joyería de goma/caucho ya que la resina resiste la temperatura de vulcanizado de lo moldes. La resina suele imprimir con éxito la mayoría de las veces y reproduce los detalles con fiabilidad. No obstante tiene algunas pegas, como un olor algo desagradable, necesidad de usar con cierta temperatura y resulta bastante frágil, pero el mayor inconveniente es que se pega a los moldes de silicona vulcanizable, lo que hace que sea poco útil para hacer moldes. Si se compra para otros usos puede ser una opción recomendable.

I use this resin for printing lens mounts for IP camera modules. The modules can get quite hot, so I went looking for a good HT resin. I had used other resins from Siraya Tech before, and was pleased with the results, so decided to give Sculpt a try. For this application, it has turned out to be a near-perfect solution. It prints clean without much shrinkage. There's a bit of warp on the first few layers, but the layers that count are plane parallel to one another. The only drawback is that it is a thick resin, so you will find that the solids in the resin will settle out over time. Shake/mix well and empty your vat after use and you should be golden. In terms of printability, I haven't had any failures, yet, and I'm fairly relaxed when it comes to controlling things like room temperature. I print with Siraya Tech's recommended settings for my printer, stir my vat between prints and the results are always good.