Geekria QuickFit Earpad Compatible with Bose QC3, QuietComfort 3 Headphone Replacement Ear Pad + Headband Cover/Ear Cushion Repair Parts (Black)

First, the Headband cover is a very good idea - simple and straight forward!Replacement of the Ear Pad is quite simple as well. It doesn't come with any installation guide, however,you can find video instruction from their website.I am not very sensitive to sound quality, however, can feel the sound been "degraded" after replacement of the new Ear Pad. So I replaced the yellow sponge of the new Ear Pad with the yellow sponge from the original Ear Pad. Surprisingly, the sound quality is back to "normal".Attached photo, the first 2 yellow sponges from left removed from the new Ear Pad. The right Ear Pad is the new Ear Pad with the original yellow sponge.

My old Bose QC3 headphone covers were old and shedding black particles everywhere. (Bose, what were you thinking when you chose that material???) I chose this kit because it re-covers the headband too; most other products on Amazon only replace the ear cups.Geekrie didn’t include instructions, so here’s my tips…The old ear cups are spread on a plastic frame that snaps out. Use the included prying tool (nice! tyvm) pry up the top edge and remove the frame+old foam. Don’t worry about ripping the “leather” piece.The old “leather” ear cup is also glued down. Use the included tool to tease up one little portion. This is on a paper backing which can be peeled up cleanly, once you get it started. Once you tease up enough to get a finger hold, gently slowly peel the rest off. It should leave a shiny plastic surface showing on the original headphone.If any little bits of glue remain it can be cleaned with a cotton swab and IPA. (No, not an India pale ale, you reprobate, use isopropyl alcohol.)The two new ear cups are identical and interchangeable.Mount each new ear cup by lining up the two pins with the two holes. With even pressure across the whole ear piece, snap the two together.If one small area doesn’t seat completely, then a snap pin might be covered with the fabric. Work the fabric back a little and try again.The headband cover went on without trouble. It’s a little fiddly for my fat fingers to get the zipper started and then it worked fine.Bottom line, it’s a good fit and I like it.

These are a great product. Fit perfectly, easy to install, and a great video on the website with a step by step tutorial of how to do everything. Have used them several times and they are as comfortable as the original set of pads used to be!

My old ones were flaking bits of material and starting to look pretty ugly. Pulling off the ear pads was relatively easy. This kit came with a plastic spudger that slid in with a touch of work. The new ear pads snapped in well and fit nicely. They fit and look as good as the original ones.The headband cover took a ton of work to attach. It's not padded, and the original isn't meant to come off. This means the new cover has to zip on top of the old one, and it's a tight fit. It took several tries, but it did come together in the end. The final result is ok. The zipper is visible and it definitely doesn't look as good as the original. Still, it does the job well enough.Overall, I've been using these headphones for a long time and so I'm glad to see their life renewed so cheaply and easily.

I had a little trouble getting the ear pads to snap in place, but once in, they're in! They feel good, and should do the job.The headband cover was, unfortunately, just a simple zip cover that you place over the original headband cover. I had previously replaced the headband cover on my QC2 headset, where I removed the old and replaced with a new one, which is a much cleaner install. This leaves an exposed zipper, and it is not tucked in on the ends, but I do like the stretchiness of the cover.All in all: It's good, not great, but for the money you can't beat it.

The earpiece pads fit perfectly and look great, but the headband is a bit of a hack - it just zips over the existing one, increasing bulk. That being said, I don't think the headband pad was ever designed to be replaced, so this might be the best possible solution. For the price, I think this is a very worthwhile choice for spiffing up an old set of headphones.

My ear pieces and top piece were sticky and losing their finish. Could not use. Of course Amazon came to the rescue. The pieces fit perfectly and are comfortable. Sound is perfect. Do not hesitate to purchase these replacement parts.

These earpads fit to my headset. That's all it needs to do, so it's a good product.