ONLINE LED STORE TRUE MODS 1 Pack 5-Pin 12V Bosch Style Waterproof Relay Kit [Harness Socket] [12 AWG Hot Wires] [SPDT] [30/40 Amp] 12 Volt Automotive Marine Relays for Boats Auto Fan Cars

good quality product saves a fortune using this with transistor and some wire. Cheap fix bi passing startup air mix removed all warning lights and got truck out of limp mode.Youtube is a lifesaver!

This is a nice heavy duty relay. This relay comes with no info. Most of the pins #'s are covered in adhesive and are difficult to read. So I will give the info here. Hopefully this will make your install easier. There are two types of 5 pin relays. Type A and Type B. This is a Type B relay. This is noted by the position of pin 30. I was able to determine this because, lucky for me just enough of the 3 was peaking out from behind the adhesive, to allow me to determine pin 30 location. It is sort of the key or primmer to decoding relay types. (12 volt planet has a nice article on 5 pin relays, if you want professional advice. I am just a guy on amazon, so take my advice for what it is worth) So I am wiring a reverse camera for my 2009 BMW E93 convertible. It did not come with a touch screen head unit, it came with an old school unit with only the basic digital screen. I updated my car with a 7 inch sat/nav with HD screen. Even though this car has pretty good visibility, the screen has backup camera capability, and Amazon offers a pretty cool back up camera that integrates into the tag light. So I figured why not. Well the reverse light is not a constant 12 volt, so I needed a relay to provide constant 12 volt power to the camera, and I use the reverse light as the on switch. My set up: Pin #30...constant 12 volt supply from a fused 15 amp supply line connected directly to my battery. BMW puts these in the trunk, right next to the tail light I am also tapping. (thanks BMW, easy peezy) Pin #85 Ground...attach this to any ground lug on the car body Pin #86 Switch source... for my BMW this is the black /violet wire to my tail light Pin #87 the red wire on my camera *****Some relays switch position #85 and #86, but form what I understand this is immaterial, because it is just either end of a switch, and so they are reversible, but your application may vary. THe pin positions for #85 ad #86 are unreadable in this relay. The wires on this relay are much heavier gauge (12 & 16 gauge) than the 15 amp circuit I am supplying or the 2 amp draw I am using. But that is to be expected from a 40 amp relay. Just know when you buy butt end connectors, you will need them to fit a heavier gauge. Or by pass the wires and buy 6.3 mm female connectors to connect directly to the relay pins. This however will bypass the waterproofing built in to the male portion of this relay, with the actual wires on it.

This is a really nice heavy duty relay. I put it in my 2017 Superduty to run my auxiliary backup lights with my upfitter switches. With this relay installed I can run the auxiliary backup lights in two modes, ON when ever I want (even with the truck OFF) or make them go ON and OFF with the factory back up lights. Works great and I didn’t have to use a diode. My configuration uses two of the upfitter switches in the truck. The mounting bracket worked out nice. This relay is water proof as well, has a nice ribbed torturous path gasket. 7/16/20 Update: Two years now and still working, no issues. Thumbs up! 7/25/2023 Still going strong! 05/21/24 still working!!! I bought two of these on my original purchase, one as a spare because that’s what I do. The spare is still sitting on the shelf in my basement.

Installed yesterday and works as a charm!

Worked as described. No issues.