Laminate Flooring Spacers : for Installing Laminate Wood, Vinyl Plank, Engineered Hardwood, LVT, Bamboo, Subfloor Panels, or Any Floating Floor Material. Made in the USA.

I like these floor spacers. I put down a floating vinyl plank floor over concrete in my lower level. These spacers kept the floating floor from moving closer to the wall as I installed additional boards. There was constant pressure on the floor to move closer to the wall as I tapped on the new planks to lock them in, eliminating the necessary expansion gap. These spacers are really easy to use and hold in place well. These are much simpler and more reliable than the alternative small black wedges, which kept falling over and becoming useless, allowing the gap to close as I worked..

I did two rooms of flooring using these spacers. They performed well. They stayed in place, rarely fell over (Unless I tapped a bit too hard on the flooring), and were just what I needed to get the job done. I ordered two packs, 24 spacers, but, in reality, probably only needed one. The size of the rooms were about 120 square feet, each. 12 spacers would have been fine for the rooms, as you can move them down the line as the floor will not move after you've gotten a few rows down. I'd certainly recommend these to anyone who is installing flooring!

These were super easy to use and durable and much better than the wedges you get at the local hardware stores. However, we still had some issues getting them to stay in place while we were installing and tightening the engineered wood connections. We would have one person securing them while the other butted the joints up. But the have a good lip to hold in. They were better than anything else we used though, so really glad we purchased them overall.

After a couple of hours of laying our flooring with normal spacers we realized we couldn't do it. We googled for floor spacers and came with these. Absolutely amazing. Helped us install the flooring, cannot recommend enough!!! If you're thinking about buying them just do it it's worth it.

I got tired of using the traditional wedge spacers that always fall over when you start hammering planks together. These worked a lot better than I expected. They handle normal sized gaps between the bottom of the sheetrock and the floor well. They stayed in place while tapping the planks together. You'll probably want more than one pack of 12 for most jobs. I would recommend these to others. Get the Roberts 10-25 tapping block too.

These spacer work better than other spacers i have bought but its still hard to mantain there space in installing flooring due to the fact that the spaces still move. I needed a 3/8 inch space and theses dont come in 3/8 inch space so i had to use a 1/8 inche space with these spacers .

My drywall does not come down all the way to the subfloor. There is a 1/4” space that goes under the drywall a few inches. Normal spacers would fall over and ruck inside that space. These spacers are awesome and don’t allow the flooring to tuck under that space. They are very sturdy and easy to work with.

Worked like a charm! Do yourself a favor and by a pack. 1 pack was good for the 400 sqf I used them on.