HAMRVL 6-Pack 30cm Led Channel Diffuser Black Aluminum with Mliky White Cover U Shape 17.2x7mm,Led Strip Light Track with End Caps and Mounting Clips Accessories,Aluminum Profile for Led Strip Lights

Corners are hard to snap on. There is just a tiny ledge that the rails fit into. Would be great if corners were made to fit better. Otherwise no issues

I was looking for diffusers for my LED lights and I saw so many that were overly expensive. I could not justify spending a ton of money on something like this. Luckily, I found these. I was a little skeptical that they were gonna be too cheap and maybe not as they were described. Luckily they showed up and they were perfect! They were a perfect fit and came with everything that I needed. I would definitely buy them again!

Great product

Worked perfectly for my Govee LED strips. The inner part was receptive to whatever adhesive Govee used and the strips stayed in place perfectly. The end cap had to be cut to allow for the wiring to fit. The opening was too small, but your mileage may vary. Two things to remember when installing. When attaching them, make sure that you test before applying, as having an LED directly in the gap between sections will shine through brightly and look strange. Not a knock on the product, or the maker’s fault, more of an FYI. Secondly, don’t try to slide the light diffuser into the mounting piece, it will never make it, and you’ll end up breaking either that or your lights. Instead, line it up, slot one side completely in, then push down on the other horizontally until it “clicks” into place. They will be able to be popped out, so practice without your lights inside. Once you do the first one, you’ll get the hang of it.

Okay, from opening it you can tell it’s cheap. I knew my LEDs were not dense so I was expecting to see dots but that’s not what turned me away. It is very easy to break it while assembling. It is like the sizes of the conjoining parts are just a tiny bit different but you can make them work. The clips were ok to me, not great or good, ok. Its just a product that’s going to frustrate you so much that you won’t be able to enjoy the end result…if you get that far. Sending back here, maybe you’ll have better luck.

I set these up behind my bar to highlight bottles. Was looking for a nice wedge diffuser and this was an easy to use set.

Easy to use with a couple of mounting options. Tou can still see the spacing between the Led strip but it cuts the harshness a bit ant looks way better then just an LED strip in the open.

I guess you get what you pay for. These come with some ends to put on her to hold the light strip in place. They don’t stay in very well. They don’t. They pop out the end that you put the and goes your light strips right at the end on the other hand when you go to put your light strips in there the wire it better be thinner than a toothpick cause if it is not gonna go through the hole that they put there for you so it bundle it up and use BTF lights three wires in a tiny wires and you try to push it in there. You have to leave a huge gap to get in to stay there and not push the lights out the other side. Can we not waste your money if you want quality set up because the Amber, if you can get it to stay, and if you can get you somehow managed get your wire through

I ended up using 2-sided acrylic tape to adhere this to the bottom of a shelf, but it works wonderfully! The end pieces all have little holes to pass through wires.

Un poco caros para lo que son y no quitan el efecto de ver los leds y difuminar la luz tanto como creía pero en general está bien. Si está en descuento mucho mejor.

Received what looked like dog chewed products. Everything bent out of shape. Not a single piece was useable.

Looks better without cover

If you are looking for something that diffuses the light well and is easy to install then this is not for you.