✨ Mirror, mirror on the car, make it shine like a star! ✨
The HouYeen Front Left and Right Outside Wing Mirror Covers are designed specifically for a range of Mercedes Benz models, including A, B, C, E, S, GLA, CLA, and CLS classes from various production years. These high-quality, gloss black covers not only provide a sleek aesthetic upgrade but also ensure a precise fit and easy installation, making them a must-have for any Mercedes enthusiast.
Manufacturer | HouYeen |
Brand | HouYeen |
Package Dimensions | 26.8 x 20.8 x 15.2 cm; 530 g |
Manufacturer reference | A2128106700 |
Manufacturer part number | A2128106700 |
OEM Part Number | A2128106700 |
Item Weight | 530 g |
J**N
Absolutely perfect. See review for a how-to.
I'm over the moon with these mirror caps. They are of good sturdy quality, a great fit and the paint job is brilliant. They are almost an identical mould of the original caps.These were bought to change the original red caps to black on my 2015 A250.They are so easy to fit, I did it myself after watching some YouTube videos.Move the glass mirrors in line with the housing and tilt all the way back on the bottom edge so you don't catch the glass when removing the cap.Pull the bottom front edge away from the housing, starting at the outside corner and working towards the door. This will create a small gap along the bottom of the cap.Use a plastic trim tool or similar to prise the cap away from the housing around the back bottom edge, there are several tabs that hold it clicked in which need releasing. Be very slow and gentle at all times.Once you've got a good 10mm gap all around the bottom of the cap, pull it straight up towards the sky, being very careful not to touch the glass on the way up. If you don't lift straight up, you could damage the indicator connector pins.Once off, remove the 2 torx screws holding in the indicator light strip. Release the two clips by these screws with a flat head screwdriver and start to pull the light away from the cap. You'll see the middle bit of plastic that runs down the centre of the indicator panel is stuck down with glue. Use a trim tool to gently separate the light from the cap. It should now be free and after a quick clean, ready to go in your new cap.Install is the complete reverse of these instructions. When you are ready to fit the cap, gently and slowly lower it over the mirror glass and you'll need to keep an eye on the indicator connector at the back to make sure you line up the cap with this as you lower it or there is a risk that you could bend it, or a pin inside it.Firmly push all the clips in all the way around, test the indicators and fold in function. Job done.
Z**S
Good product!
J**G
Look smart.
Very pleased. Like a lot of car trim a little bit fiddly to fit but they have improved the look of the car no end.
N**
Not fitting
For some reason they are not fitting
Y**N
Super
Produit conforme à la demande , classe a 200 w176 de 2016 .Rien a dire merci beaucoup
F**O
Ottime...
Ottime...👍👍👍👍👍
Trustpilot
3 days ago
1 day ago