HAF700 EVO

I'm NOT a fan-boy or a paid shill. I'm just a guy that likes to build computers. I was searching for an extremely large case for a water cooling build with a full size E-ATX (12"x13") server motherboard (SSI-EEB) I had already purchased 2 large format cases and returned them both due to poor engineering and design. (TT Tower 500 and a Cougar) After 2 failures in a row, I bought this CoolerMaster 700 HAF with a good bit of anxiety. I'm absolutely amazed. The first thing that stood out was they actually put thought into removing this behemoth from the packaging box. It's big, bulky, and very heavy. You can't simply slice open the top of the box and yank it out of there. It's a beast. CoolerMaster (CM) designed the box with 4 little squeeze tabs at the base. You slice the top tape and then pinch to remove each of the 4 little squeeze tabs around the base of the box. Then you simply slide the box up and away from your new case. Talk about EASY!! The next thing that shocked me was how easy it was to remove both side panels. There is a single thumb screw in the back of the case, at the top. You remove that with your fingers, and then slide the top part back about 1 inch. The side doors pop off with a gentle tug and the entire top comes off if you slide it all the way back and lift up. At that point, the case is wide open for your build. No tools!! The top part is held in with the thumb screw and the doors snap into place with metal clips in the case. The side doors go back on just as easily. As I said earlier, I'm building a massive server board with a bunch of water cooling. I'll have (5) radiators in this thing and it will hold them ALL. It has room for dual 480mm rads on the top and a 360 rad in the front as well as the bottom. It also has clear room for a 240mm in the back and I think I could stuff a couple tall skinny rads here and there. It has room for at least 3 good size pump/res combos or plenty of room if you wanted to separate those parts out and hang your reservoirs up high with pumps spread across the floor. You could get 4 pumps on the floor easily..... and that's just the front side. It has brackets for mounting your pumps and reservoirs too. They remove with a simple twist of the thumb lock. No tools. It's a massive case and built for anything you can throw at it. As such, it comes with a giant rack for your HDD. I'm not using those at all so I don't need this rack. I'm using dual NVME on the MB for my OS, and quad 2.5" SSD for storage. I wanted the HDD space to mount a pump/res combo. It comes completely out with a simple thumb press on a metal tab!! 2 seconds and it's out. No tools! Giant hole for almost any other type of hardware you can imagine. Awesome. CM includes a single 360mm radiator bracket. It's in the bottom of the case but removes with a simple twist of a thumb tab. Again, tool-less removal and installation. I got to looking around inside the case and discovered that if you don't want that 360mm radiator on the floor of the case, you can flip it over and mount it into the top or the left side!! (maybe you want pumps and reservoirs down there?) How cool is that?!?! They made the case with the right slots and tabs so that you could move the 360mm radiator bracket into any of 3 different positions inside the case. It does come with 5 fans. There are (3) 120mm fans (back and rad bracket) and (2) of their 200mm fans in the front. It does come with 2 different RGB/PWM control boards. I'm not sure how that will work with my SSI-EEB server MB since I don't have RGB headers. I do want to try and work with it, but I'm prepared to rip it all out and replace with a Razer system. I'll have to wait and see what happens when I get that far into the build. It DOES have the stuff in there if your MB is compatible. It also comes with a plastic case for the included hardware, and there's a LOT of it. I'm just super impressed. It's clear to me that CoolerMaster actually put thought into the design. It's all modular. It all makes sense. Stuff lines up and is put together in a logical manner. 5 stars across the board. Way to go CoolerMaster!!!

This is a great case with plenty of options and space for every size motherboard. If you are short on space then this case may not be for you. It is well constructed and compartment have removable panels as well as easy access for the filters. I purchased a Cooler Master case 11 years ago and replaced it with this one. There have been a lot of improvements and updates. I really like the way it is constructed and would recommend it to anyone looking for a full tower case. I would like a little better manual with this case, but it does work. Cables are easy to hide and connect, and it is compatible with just about any board.

Exceptional airflow keeps components cool, spacious interior fits any hardware, and the LCD screen is a unique touch. It is heavy : A top-tier choice for enthusiasts who want maximum performance and a striking visual design.

Everything in the case was up to spec. Lots of room for components with tons of versatility in mounting radiators and fans. Not too crazy about the LCD screen on the front panel but its a nice touch I guess. Would be better if it wasn't there to be entirely honest. Cooler Master's Master Plus software is kinda crappy and every once in a while the LCD screen goes black and requires you to launch master plus to sort of reset the LCD. Case is definitely on the heavy side and much bigger than my Cooler Master H500M that I had before this. So far I'm very happy with the aesthetics and cooling capabilities of this case. Worth every penny IMO

This case is absolutely massive in the best way. The HAF 700 EVO gives you so much space for airflow, cable management, and future expansion. I'm still in awe of how solid and premium it feels. Cooler Master really nailed the design and cooling options — and the ARGB setup looks stunning. It’s a serious chassis for serious builds.

I have always liked HAF cases and this one is by far my favorite amongst them. Tons of cooling options and an awesome front panel with some of the best RGB lights I have seen, the small round screen is great for showing all kind of PC related info and optionally gifs or still pictures, it does lag with gifs though, a 10 second animation might take twice the time to show. The case is roomy inside although it might still be unable to accommodate very thick GPU cards from previous generations. The HDD compartment behind the motherboard is nice but gets a bit hotter than the rest of the case, it could use some dedicated cooling.

I have been a fan of Cooler Master cases for many years. Having built several personal PCs over the last couple of decades. So when I decided that it was time to build one last one (wife laughing in background) I chose the EVO 700. I was not disappointed. I has a huge capacity for any MB/cooler/graphics combo you wish to build and that's just the main compartment! A second compartment allows for your power Supply and storage drives. It supports a mix of 3.5, 2.5 HDDs or SSDs with a well designed tool less system that is sufficient for almost any use case from Gamer PC, Workstation or even as a server. My only personal con has to do with the mounting of the Power Supply. I chose an ASUS ROG Thor 1200W Power Supply which has an ARGB display area. Since the case is designed with a divider and the Power Supply fits in the lower rear right area of the case the display is not visible. There may be a mod to remedy this but I did see an easy solution for now and since I can monitor the Power Supply voltages and temps onscreen it is only a minor concern compared to all the advantages this case offers.

This is a good huge case, you just need to get extra RGB connectors if installing more fans

وماله مسكات تقدر ترفعه من الارض تقيييل بدون الاجزاء

The product is good, but Cooler Master support is horrible! My ARGB HUB doesn't work and guys don't respond to support on the FanZone website and also on Facebook. My time to return the product passed and I didn't realize it, otherwise I would have returned it. Buy another case or buy it from a store, because if you wait for Cooler Master to respond, you will end up with a damaged product!

Enfin un bon boîtier par Cooler Master! Ça faisait longtemps! Côté qualité, je suis très satisfait. Très content de voir qu'une version a prix acceptable soit apparue. J'aime beaucoup la version EVO de ce case mais rien qui justifie un prix de plus de 800$+++. À 390$ pour celui ci, c'est beaucoup plus raisonnable. La différence entre les deux versions est simple. Première chose, l'avant. Le boîtier ci, est simplement fait de "mesh" sans le module pour afficher les températures ce qui permet d'avoirun meilleur airflow. Ensuite, il n'a pas le miroir de 360mm qu'on peut mettre sur le côté de la carte mère ou dans le fond. Dernière chose est le riser cable et le support vertical pour carte graphique. A mon avis ça devrait être inclus avec un case à 400$ mais bon. C'est 160$ de plus à investir pour avoir le riser cable et la carte graphique installé à la verticale. J'ai inclue une photo qui montre leur nouveaux support. On peut retirer une petite partie, ce qui permet de l'installer us haut et ça peut donner plus d'espace pour un radiateur. Pour ce qui est des possibilités de build dans ce case, on a énormément d'options. Possible d'avoir 4 radiateurs à la fois avec tout l'espace que nous avons. Au plancher, il est possible d'avoir un radiateur 40mm avec une config push/pull en même temps qu'avoir la GPU verticale. Si on va plutôt avec une GPU horizontal, un radiateur 60mm en P/P est possible. Au plafond, on peut avoir 2 × 360mm comme radiateur. Un, peut être 60mm en P/P et l'autre nous avons 10cm de clearance. Donc un radiateur 60mm est possible mais pas en config push/pull. Ensuite, le panneau latéral. Comme ont peut voir sur une de mes photos, j'y ai insérer un radiateur 60mm d'épaisseur en push/pull. A mon avis c'est génial. Pour finir l'avant. Ça c'est plus compliqué... il vient avec 2 fans 200mm. Si on les retire, ça laisse un gros trou et impossible d'y installer autre que des fans 200mm. Sauf, si on utilise le support de fans qui est au plancher. On installe le support à l'intérieur, à l'avant et ça permet de mettre des fans 120/140mm ou/et un radiateur. Cependant, impossible d'avoir de fans à l'extérieur du boîtier de cette façon donc on se retrouve à prendre plus d'espace à l'intérieur. J'ai essayé de mettre le support à l'extérieur mais comme ont peut voir sur une autre de mes photos, impossible de le sécuriser en place car les trous ne s'alignent pas.☹️ Une autre chose a prendre en compte avec la configuration avant est que si on deplace le support a l'avant, impossible d'installer des fans ou radiateur au fond car il n'y a tout simplement rien pour les fixer.(voir photo) Seule facon serait de modifier la tour avec de nouveaux trous. Très faisable par contre! C'est le seul bémol que j'ai trouvé jusqu'à maintenant. Tout est possible d'installer sans outils. Même le power supply. Il y a aussi on petit panneau dans le bas de la carte mère qui sert de "shroud" pour cacher le câblage. Très bien comme petit détail à mon avis! Aussi, pour installer les radiateurs/fans du haut, le tout se retire pour plus de facilité.(voir photo) C'est à peut près tout. En gros, superbe boîtier que je recommande fortement!