Single Fixed Glass Panel for Shower 30" x 76" | Tempered Glass with Chrome Finish | Frameless Water Repellent Shower Screen by Fab Glass and Mirror

The install was easy and the glass was perfect. After 1 year I notices the brushed nickle U channel was getting a white powder on both inside and outside of the finish. NO clue what it was but was able to whip it off. Now after 2 years I can say the brushed nickle is excessively covered with this white corrosive almost like a battery acid finish. The metal is pitted where you try to whip it off. I've talked with other installers and they have expressed a lot of imported metal products for bathrooms do this. My shower head and cross bar both expensive and listed as stainless steel are perfect and look great. So I''m assuming its the process on covering the aluminum U channel that's the problem. JUST ordered a stainless steel 304 U channel from CRL in CA and will install next week when it arrives. I hope this corroded aluminum U channel comes off easy. I would suggest if you order any shower glass to not use their U channel. Save yourself the extra work off pulling it apart in 2 years. VERY upsetting.

Product came in packaged very well. Looks great. would give it 5 stars but the delivery company has poor service. The delivery company, XPO, doesn't not follow their delivery times so be prepared to wait all day. Would recommend that the seller find a new delivery company.

Hire a professional to install this!! Don’t take chances. Only thing I didn’t like was that the water can get thru the bottom channel on the ground so it would puddle on the outside of the panel. Silicone fixed that…now it’s perfect!

I used two 36" wide panels to enclose the side and rear of a shower. Product was adequately packaged and arrived in just a couple days without damage. Make sure you open the box and check the glass before accepting. Easier to not accept broken glass from the trucking company and let them deal with it. Most difficult part of the install was drilling the holes in my very hard porcelain tile. Make sure you have a good quality diamond drill bit if you're doing porcelain, or other hard tile, and measure very carefully (twice) before drilling holes in your tile. You must have a good quality glass suction cup lifter that is rated for the almost 100 lbs the panel weighs. You will need a helper to guide the glass into the bottom track and to hold the panel plumb when you mark the tile for the upper bracket. A vinyl trim piece is included and fits over the glass on the edge against the wall. The trim piece will allow you to make up for minor imperfections in tile "flatness" or an slightly out of square wall/base - if you are out of square by by more than just a little you will have a problem with the install and this is not the product for you. All of the components were of very good quality and finish. However, the product does not come with a corner support to brace the top of the glass back to the wall and after the install I thought the glass was not supported firmly enough. Lots of corner braces you can buy and would recommend that you do that.

I’m very happy with this purchase so far. Looks great at a reasonable price. At first, my contractor didn’t think it was going to work in the space and I requested a refund. It ended up working and I didn’t have to return it thankfully, but their customer service was spot on. They reached out to me on multiple occasions to set up the return and even a follow up to make sure I was still satisfied. I’d give their customer service 5 stars as well.

Three problems with install instructions and supplied hardware: There is a long strip of silicone gasket that needs to be installed on the edge of the glass and compressed against the tile wall. It's a very tight fit and impossible to adjust in place. No mention is made in the instructions. Secondly, and related to the first, the wall mounted attachment plate has absolutely no play or adjustment whatsoever, requiring full compression of the silicone gasket before the through bolt can be inserted. Lastly, there are plastic shims that are placed in the base track to cushion and level the glass, HOWEVER, they are only 1/4 wide and the track is 3/8", so they easily move out of position and cannot stay stacked if necessary. Maybe adding a peel and stick feature would be an improvement. I also had to substitute SS screws to replace the low quality supplied fasteners.

If you want a non moving half shower door it is great. My shower is 5',the inrlterjor is 58". The door covers half the shower. Some water splashes past it. If you do nor want any water, get a full sliding door. This looks great, clean lines, very modern. Good quality, shipped by truck and arrived in perfect condition.

Easy install. Modern look. Arrived undamaged. Thick glass. I was a little worried about ordering something like this from Amazon. I had ordered one prior from HomeDepot and it was damaged & they never contacted me to notify me. I had to call to get the refund and status update. So I thought let me give Amazon a try. Very glad I did. Perfect transaction.