Q Acoustics 3000WB (Black) - Single Wall Bracket for 3010(i), 3020(i) and 3090C(i) Speakers

Bought five of these to support 4* 3020's and a 3090C, and am glad I did. I nearly went for some cheaper universal supports but decided to try these after the good reviews. Four screws to attach them to the wall (not supplied) and then screw the bolt into the bottom of each speaker using the supplied Allen key. They hold firm and secure and you get immediate confidence they aren't going to sag, or worse. The speakers bounce a little so probably not as good as shelf mounting but not far off. My only real problems with these was they allow tilting left, right and down, but not up. My centre speaker needed to point up slightly being under the tv and the bracket would not allow me to do this unfortunately. With some lateral thinking, I managed to chock the bracket up slightly using an angled rubber wedge so all was good. The 3090C has quite a wide spread anyway so the tilt was not as critical as I thought it might be. These come in a nicely packaged box and there are a white and black cowels supplied so if you have white speakers, you can put the white cowel on for a more appropriate finish. I found the cowels to be a bit wobbly and am worried they might rattle but so far, so good. I'm not even too sure I've got them on properly as they are quite tricky to attach. Great brackets, expensive but worth it.

Perfect for my 3010i speakers, these are pretty heavy little speakers and needed to wall mount them for surrounds as part of my 5.1 setup. These brackets are perfect for the job, plenty of adjustability and really sturdy. Not ideal for banana plugs unless you slide the speaker forward in its track to its maximum adjustment, bare wire or spade connectors would be my suggestion. Not screws or plugs included so something to be aware of and account for (I used 5cm screws and 5cm/8mm heavy duty plugs into a brick wall).

Now that I have a kid, I needed to move my speakers off their floor stands and keep them out of harms way. I have the Q Acoustics 5.1 setup so needed 5 of these. They arrive nicely packaged but minus fixings, which whilst irritating I understand because these brackets hold a lot of weight and it's imperative that you use appropriate fixings for the type of wall you have - else you could end up with a ruined wall and damaged speakers. They are nicely made, and do the job they are designed to do very well. Essentially one bolt holds the speaker to the bracket and you can move the speaker through a large range of motion side to side and up/down until you tighten the bolt at which point everything is locked. Once in place they are very, very sturdy. A nice touch is the bottom caps that come with each mount - you get a black and white in each to match the colour of your speakers. A previous reviewer mentioned that the bolt got stuck half way up the speaker. I didn't have this issue on any of my 5 speakers. At almost £20 a go these aren't cheap, hence 4 stars not 5, but I can't fault the product itself.

Very well constructed and does exactly what it says on the tin. Only criticism is that with the weight of the speakers they do flex a tiny bit but this could be due to the way I’ve installed mine. See the second photo… it’s mounted to a steel beam where the bottom of the bracket is lower than the beam…. This is the one that flexes a tiny bit. The other one (first photo) sits perfect

I recently invested in a Q Acoustics setup, my first foray into surround sound having always had Stereo setups up to this point. These brackets are used for my 3010i surrounds. Having struggled with universal wall mounts in the past, to me these were a joy to install and took only a few minutes. The plastic covers (which come in both black and white) are a very nice touch. Buy some fixing hardware, as the brackets don't come with plugs/screws - not a problem because supplied fixings are never usually all that good. The other bonus is that you can use the same bracket for the 3090Ci centre speaker, which I may do in the future if my setup changes. Are they good value? I would say yes, considering their design, build quality and the addition of the plastic covers.

Hat perfekt gepasst

Support robuste et esthétique , livré avec 2 caches: blancs et noirs pour s'accommoder avec l'environnement; très pratique. les enceintes sont réglables dans les 2 sens ( droite-gauche et haut-bas) mais seulement de 30° environ à droite et gauche ..cette limitation est fonction de la profondeur de l'enceinte, QA3020 pour ce qui me concerne

Soportes de muy buena calidad y muy esteticos. Quedan de cine con mis q acoustics 3010. Los tengo tanto en los frontales como en los traseros y permiten jugar con el ángulo y la inclinación . Ademas traen dos embellecedores, uno negro y otro blanco, para conjuntar con el color de tu altavoz

Il supporto in questione (ne ho acquistati 2) funziona egregiamente sulle q acoustic 3020. La regolazione orizzontale e verticale avviene con chiave esagonale (fornita) e la zona dello snodo può essere coperta da apposito carter (fornito nei colori nero e bianco). L'ho fissato al muro con 4 tasselli da 6 mm.

Very sturdy