Handheld 2D Barcode Scanner with Gooseneck Stand, Automatic USB Wired QR Code Scanner Bar Code Reader Support Screen Scanning for PC POS System Library Store Supermarket Check-Out, Inventory…

Good value for money

good quality for the price

I start with the manual. Its there, and it explains some codes and how to set the scanner. Its lacking any information about the manufacturer, no CE or UK CA mark, no standards nothing. Only a sticker on the box has some of this information. Keep the sticker ... That excludes basically professional use. This light impression goes on in the build. Everything lighweight, no point convincing anything is solid enough to withstand professional use for longer. The base has two holes for screwing down if that is wanted. But one hole is covered with a name label, sticked on and not easy to remove to get access to the screw hole. The pole is a certain type of metal tube made form bended and twisted thin metal, it is quite stiff and needs some force to bend. At its ends are plastic heads, which have flat sides, which allows mounting in the base plate and the holder in only two directions. Awkward. The way its mounted in the base plate with the screw is so weak, I can see something broken after a short time putting the scanner in/out often or bending the pole a few times. (hold the pole at one end and bend at the other, not hold the base or head). The holder is obviously made for tiny Asian hands, not my pranks. I can place the scanner only with my fingers holding it into the stand, not grip around, space far too small. Pressing the button of the scanner I thought I did something wrong, it feels like stuck (but isnt), so no quality impression here either. When I look at the cable, its not only ugly gray, it is an Ethernet to USB A, it is unsuitable thick and short too. Just from computer on the floor to table if both are on the same place. Thats not suitable for work environment. I wonder if they could add two connectors, one USB and the other Ethernet on both sides, which cost only small money, so extension cables could be fixed easy. But that may blow the low cost idea... Hold on, its actually not cheap. For my little amount of use it will do the the job, but for daily professional use look for something much more solid. Technicals: I have to test that later, and I hope thats not so lightweight.

The '2D Barcode Scanner, Eyoyo, QR Barcode Reader, with Screen Scanning, Wired with USB Cable' arrived in a plain box that also contained a User Manual. This is a lightweight wired hand scanner that when I plugged it into my Windows 10 PC it was automatically detected. I measured the distance from the scanner to a barcode and it worked in most case at distances up to 30cm. Any barcode detected by the scanner is pasted to the current cursor location if it is a writable field, There were no issues with scanning either 2D barcodes or QR codes during the many tests I performed. This scanner is handy to have for product manuals that only provide QR codes rather than a full URL.

We use bar code scanners a lot in our factory and I thought I'd check this unit out to see if it would be a suitable replacement for our current supplier. I gave it to our IT team and after some guffawing and scepticism they put it together and gave it a test. They were gobsmacked! It connects with a RJ45 network to USB cable and when plugged into a laptop with the necessary software it saw the scanner straightaway and it was ready to use. No issues with scanning various bar codes, it accurately reported the EAN number each time and even when scanned multiple times simultaneously it still gave accurate results. The build quality of the scanner is good, lighter than our current units but it feels solid. The trigger to fire the scan is positive and it feels like it will not break after repeated use. The stand needs to be assembled before use which is relatively simple. It holds the handset well and is pretty stable. Verdict: No real issues to put our IT bods off this scanner. Connected straightaway and reported the right codes. Price is competitive versus our current brand. Would recommend as a good buy.

The scanner comes with a stand, a USB cable and a manual. The manual is fairly succinct so I screen-grabbed the information on the product page so I could make a print out of the relevant information. The scanner itself seems strong and well-built. The gooseneck is adjustable but needs quite some pressure to bend it to where you want it. The trigger is positive and easy to use. The scanner feels comfortable in the hand. The plastic stand feels flimsy and the screw connector feels that it won't be long-lasting. The cable is a short Ethernet to USB-A so your computer will need to be very close by. This shows in the product photographs but it is easily overlooked when reading the product description. The scanner reads accurately and quickly, both barcodes and QR. Set up is very simple and quick. I feel there are more reasonably priced scanners that do what this scanner offers. The lower quality of the stand put me off. For light, non-commercial service, such as I need, the scanner works very well and will be a help.

This barcode scanner works as expected and can be used for multiple different tasks. It's pretty much plug and play with no need to charge. It can be plugged straight into your PC and it's good to go with whatever software it is that you use. I've tested it on shipping labels and it's picked up the bar code no problem at all. The unit itself is lightweight and easy to hold, so if you need to scan a lot throughout the day, I wouldn't envisage any issues with it becoming uncomfortable. There's also a stand included so it can be kept in easy reach. All in all, it's a good barcode scanner for the price. I hope you found this review helpful.

This scanner is truly Plug & Play. It emulates a keyboard. When it scans a barcode or QR code, it simply sends the decoded text to the computer, followed by the ENTER key. As such, it is compatible with virtually every POS system on the market. I tested the various connection methods, and they all worked fine. The USB receiver has a range of over 10 meters. The Bluetooth connection was limited to about 3 meters from my computer, but it connected quickly, and I didn’t experience any disconnections. Similarly, the USB cable functioned flawlessly. One thing to note is that you will need the user manual to switch between the different wireless connection modes. The scanner actually supports three Bluetooth modes in addition to the 2.4GHz receiver. To switch between them, you must scan specific QR codes in the manual. The scanner is very lightweight, yet it still feels solid. It has an integrated speaker and a vibration motor to provide feedback. The included cable is a standard USB A-to-B, which is a great choice since these cables are easy to replace. I have other barcode scanners that use proprietary cables, and those are much more difficult to deal with. This scanner uses a bright white light to illuminate the barcode, which works well. Additionally, it provides a guide to know where to aim. The detection distance ranges from 3 cm to 16 cm (1.18” to 6.3”). Battery life is good. Obviously, it depends on usage, but I was able to go a full week without charging. Overall, it’s a great scanner. The only thing missing is a continuous scanning mode and a stand

My first impressions of this scanner was not very positive. It looked cheaply made, and when I turned it on, the horizontal red guiding line was very blurry. Those two things remained the same: the materials are not of the highest quality, and I still can't figure out why the red line is so blurry. It is probably just a guiding light (not laser) that can't focus. But if we put those two visual issues, it performs its functions quite well. It can read a variety of barcodes. I have tried it on 1D barcodes and 2D QR codes, and it works fine with both. It probably does not use a laser light because it turns on an illumination light as it scans. Its ability to use a variety of connection types is great, but I wish the connection port on it were of type USB-C instead of (the printer type) USB-B, but that doesn't cause any functional problems in any way. It comes with a documentation that is small but with many pages. You need to keep that manual handy as there are some certain command codes (as barcodes) that should be scanned to make the device perform several functions or adjust several settings. Overall, I liked this as a handy, functional, and low-cost tool. Note that the price was not available, so I cannot comment on or evaluate using the price. A low price would be appropriate for this device as it does not seem to be made of expensive materials. Furthermore, it lacks certain good qualities that professional scanners can possess, such as a stand to put it in or a well-focused scan guide light.

Price at time of review $59.99 So the item didn’t work upon arrival.. charged it and tried connecting it to my smart phone and nothing happened. I followed pairing instructions in the booklet that came in the packaging and haven’t been able to use it.. maybe I got one from a bad batch? Sadly is of no use to me since it doesn’t work :(

This is the second Eyoyo Barcode Scanner I've ordered. The first on was great but this one is even better. It brings 2.4GHz Wifi, Bluetooth (both wireless) and USB (wired) connectivity to my office where we use the scanner for inventory purposes. Not only does it offer superior connectivity choices for our operation, but it brings QR Code scanning capability where I had only barcode support before. This scanner, like the other EYOYO products I've used, is built to last. It's well constructed from a high impact plastic and has survived several nasty falls from shelving units and once from the top of a step ladder where it was being used on a high shelf. I really thought it would have been damaged from the 10 foot fall, but it wasn't. It kept right on scanning like nothing had happened. This unit is fast, too. It handles 1D and 2D codes with ease and it's just as capable of reading codes from LCD screens as it is from paper. This is a must have in our all-too-enabled digital world. It reads right through my iPhone's screen protector but privacy protectors do interfere with its scanning ability. The feature I like most from this unit is that it has tremendous battery life. Even at scan rates of 2,000 scans per day or more, one charge will last for a whole month thanks to its robust 2,500 mAh battery. The scanner supports a plethora of code sets (see the scanner documentation for the whole list) and lets just say that I haven't found anything that we use to be unsupported. Weight wise, the scanner is great. It's not too heavy to carry around all day nor is it so light that it breaks if dropped. Its ergonomic design fits nicely in the hand and it even looks kinda cool too (not that typically buy office equipment based on looks). In all, it just works. When our older unit finally bites the dust, I'll be getting another of these advanced models to replace it. Price wise, I don't think you can beat the quality or the feature set for the price. Quality, Functionality, Utility, Broad Communication and Scanning Capabilities. It has it all! I really can't ask for anything more.

This is a great item for collectors. Use it scan in and catalog all your collectable items. Great for identifying and verifying items at swap meets and secondhand shops. Can give you some extra information which might be instrumental in avoiding spending your hard earned cash on dodgy items. Works well so far, no complaints there, but fit and finish wise it could be a bit better made. All in all I'm glad I have it. Try not to drive your family nuts by scanning everything in sight. In other words please scan responsively.