🔗 Connect with Confidence!
The HiLetgo 2pcs Xbee Adapter is a dual power output USB to Serial Adapter designed for seamless integration with Arduino and PC devices. With its lightweight design and compatibility with both 3.3V and 5V systems, this adapter is perfect for tech-savvy professionals looking to enhance their projects.
| Brand | HiLetgo |
| Manufacturer | HiLetgo |
| Model | 3-01-1064 |
| Package Dimensions | 14.2 x 9.5 x 1.2 cm; 14 g |
| Item model number | 3-01-1064 |
| Hardware Interface | Bluetooth, USB |
| Compatible Devices | PC |
| Number of items | 800 |
| Colour Screen | No |
| Batteries Included | No |
| Batteries Required | No |
| Data Link Protocol | Bluetooth |
| Number of Ports | 1 |
| Manufacturer | HiLetgo |
| Item Weight | 14 g |
S**
Handy for Configuring the Modules with XCTU
Board has FTDI chip and 3.3 volt PS for the Digi Module. Works great for configuring the module using Digi's XCTU. One caveat : if you're using the version of the module with the antenna connector, protect the 90 degree .1 inch header with insulating tape or the connecter can easily short it out. I caught this right away and had no problems, be forewarned!EHSD
M**J
TX and RX labeled incorrectly (swapped)
J**E
Rx and tx labeled wrong.
The Rx and tx pins are labeled wrong, also if you're using an xbee with sma connector it will hit the serial pins. Otherwise these work fine for me. No trouble with the USB interface, just took a bit to figure out the mislabeled pins.
J**E
poor quality
3 of 5 units had the XBEE socket filled with solder and would not allow the chip to be plugged in.
I**N
You might want to try a different manufacturer.
I bought 2 of these; one transmits, but doesn't receive. The other refuses to be recognized by a PC (and I've tried several PC's), and you can't update the USB drivers for it. I've used several XBee USB adapters before (from other manufacturers), but these were so inexpensive, I figured I'd give them a try. Wouldn't buy them again!
Trustpilot
3 weeks ago
3 days ago