Thermalright TF4 4g Thermal Compound Paste for CPU Coolers, Heat Sink Paste High Conductivity 9.5W/m.k For All Processors(CPU,GPU),4 Grams, Non-Conductive,With A Spatula Tool(TF4 4g)

It's decent thermal paste considering it's one of the cheapest. Comes with spreader too. Nothing to complain about.

I had a computer that started to shutdown after a little while.After dismantling it I found the thermal paste had dried up..Looking for a replacement was a nightmare, as there are so many to choose from. The the difference in cost can be astounding.Here I am 4 weeks in and the computer is fixed. So I would recommend this.It's easy to use and good value.

Bought for an old core-7 cpu. No heat issues after a couple of months use. Was easy to apply a thin film of it onto the CPU. Far more than you could ever need in a 4g syringe - I've got about 4.95g left - however this size was the cheapest I could find outside of prime.

computer running at 30-40 when idle with this new paste, good and worth it very cheap

I used this thermal paste on my PlayStation 3, which had an overheating issue causing it to shut down within minutes of gameplay. Applying this thermal paste solved the problem completely. Now, I can enjoy extended gaming sessions for over 6 hours without any overheating issues. It’s an effective solution that revived my gaming experience.I don’t know the ins and outs in the world of thermal paste, which paste is right for which console, but regardless, this worked a treat. I used less than a third of the pack, so plenty left for my other consoles if they ever run into problems.

I have a hot tap with Hester unit that started to splutter, having taken off the thermostat(I believed that was the fault), having ordered a replacement and whilst waiting I wondered if the contact between the thermostat and the heating cylinder had been compromised. Coated the thermostat with this paste and …… it works perfectly.

Easy to use, functional, good quality and compatible with loads of products. Good amount it ones with aswell. Have no problems, it works.

This was purchased to ensure correct and fast temperature sensing on an espresso machine boiler. This role required a higher than normal temperature tolerance and this product covered it. Easy to apply a thin coat thanks to the included spatula and the 2g syringes are a good amount each.