Beech Lane Wireless RV Leveling System, Made in the USA, User-Friendly Phone App With Real-Time Precise Leveling Measurements, Advanced Wireless Camper Leveler, Included AA Batteries, Patented

Leveling an RV is so painful and time consuming. Anything that can make it easier is a must. I have the drive-up ramps so that solves for half the battle. This gadget solved the rest. Now from my truck I can back onto the ramps and precisely know when I'm level. No need to walk around and check the bubble level or have my wife trying to scream at me when it's there. In a few seconds I can be perfectly level. Wow! I have used the one from Camco that you set on the floor, and it was garbage. Was not accurate enough as it could only get you close. This thing is extremely accurate, and I constantly compare it using my 4 foot level to be certain. The app that it comes with is amazing and easy to use. I mounted the device on the side of a cabinet. Quickly paired it to the app, set my trailer settings, set what direction the device was facing and instantly it configured itself. Anytime I need to make an adjustment the app has a button to immediately recalibrate itself. It also graphically shows you which side of the camper is unlevel and updates in real-time. 5 stars for the app and how easy it is to use. Couldn't think of a more perfect user interface. I love that you don't have to turn the device on. It runs in some extreme power save mode but turns on when your phone connects to it. Had it for several months and have yet to change the batteries. I now have several friends with it, and they all love it too. This is the new MUST HAVE gadget for any trailer or RV.

Fantastic little gadget! It works exactly as described and was very simple to set up. It's small and makes parking a trailer on level ground or adjusting to level so easy.

This device is a delight... fine-grained data, easy to use, and intuitive. Also, huge thanks to the designer, who helpfully answered a couple of geeky questions... A+ support (the unit was fine; my question was about a tricky application). If you're in a situation where you have a rig that is sitting crooked and you don't have a good way to establish an initial level reference, all is not lost. Use a long bubble level on some nearby surface with suitable shims, calibrate the Beech Lane unit to that in both axes (eyeball as best you can, as there are no orthogonal square edges), then go tape it to a visually promising surface. You can also use free sensors/physics apps on most smartphones to give accurate roll/pitch/yaw data, and this can be used to get a good idea of whether said surface is more or less an accurate 90 degrees from the floor in both axes. All this might sound geeky and complicated at first, but it's painless and easy to tweak if you don't get it quite perfect the first time. The goal is to have the app believe that it has been referenced to a level rig. At this point, you can start playing with moving things around (for us, that part was tricky with a very non-flat gravel pad, but we also had the Beech Lane curved leveler kit to make short work of the crowned edge. Here's where you can start iterating to get it perfect. Once the app is showing that you are close, set the brake and do a little reality check with the level (or phone) on the floor or whatever you are using as a reference. When you find that you have it nailed, you can re-establish zero reference on the sensor without going through it all again, and if you wish, shoot in the two screws to keep it right where you put it and be ready to use it for all future parking jobs. But you don't have to attach it permanently... it is a great general purpose leveling tool, and in our case we have a couple of mobile lab trailers that could use a little tweak when I get motivated to hook up and do battle again (but the RV was WAY off, and urgent). I think of this in the same category as digital multimeters, laser thermometers, infrared camerasm and all those other tricorder-gizmos that help you see physical phenomena that are hard to assess by eye. All in all, this is a great product. If I were to make any suggestion, it would be to add a jig that brings out 90° edges so it can be tucked against a ceiling or wall to help visualize "square"... even though that is sometimes marginal in an RV and is not really necessary since you can calibrate it to any position. Incidentally, if you have trim issues on a boat from the unbalanced moments of tankage, batteries, and other heavy objects, it is basically the same problem. You can use this sensor to accurately observe relative roll and pitch while moving things around to get her on her lines. Feedback via the app is very fast, and it is easy to use.

I've had the Beech Lane Wireless RV Leveling System for about 3 months now, and it's been fantastic. The sensor is bluetooth and connects with the app on my phone and gives precise, real-time leveling info—no more bubble levels or guesswork. We’ve used it on several camping trips, including a longer cross-country run, with zero issues. It’s made leveling the RV so much easier than I can even put into words—truly a game-changer. The app connects from the driver’s seat, shows exactly how much to adjust side-to-side and front-to-back, and gets me level in under a minute. Calibration holds perfectly trip after trip, and battery life on the AA batteries has been great so far. Customer support is top-notch too—responsive and helpful when I had a setup question. Small USA-based company with a lifetime warranty is a nice bonus. 5 stars for accuracy, ease, and reliability!

It works great. Saves a lot of time at the campsite. At some campsites can adjust where pull in and find a level spot without leaving the car. No problems with Bluetooth and works from a distance. I would recommend.

This is making things so much easier when I pull into a site. I can just look in the app to find the best place, love it.

So far so good. This does what I wanted it to do and it has helped me get our trailer set up quicker then in the past I would recommend this to anyone that wants to setup a travel trailer with less hassle.

I’ve used several levelers over my camping years, and this has been rock solid. It’s a simple setup and works every time. I like being able to use app in truck when parking to find the most level spot for the camper. Also after unhooking, instead of going back and forth to side of camper to check pitch, I can just monitor app to set level. Recently I thought I had a problem with the unit as it showed level no mater what pitch I set tongue jack. I thought it was frozen. I contacted seller and he promptly send me a new unit. When I took old unit off wall, I tried again to see if it would work and discovered that somehow the length and width measurements were reading 0. I put dimensions in app and unit worked as before. When using app I may have reset those measurements and didn’t notice. The unit is great, support outstanding.

It is excellent, however be warned measurements are not available in metric (temp and height to level). Hopefully one day they may update the app with a metric option. Having said this, it is not an impediment to be able in real time figure out level from in the car.

Great product just have to reverse passenger and driver sides down here in Australia. Hs potential to reduce setup times and discussions about level of the caravan considerably. Easy to install and configure using the app for Android or IOS.