3D Printer Enclosure with LED Light,Dustproof Tent Constant Temperature Protective Cover for Creality Ender 3 V3 SE/KE/Ender 3/Ender 3 Pro/Ender 3V2/Ender 3S1/Neo/Anycubic Elegoo, Medium

This has to be the best upgrade you can make for any open frame 3d printer. The quality is way better than I expected. Abs prints are coming out flawless, even with the fan on up to 40%. It took 5 mins to assemble this and the medium size is a perfect fit for for my neptune 4. If I was to try and find a fault it would be that the zip only opens from the outside so if your wife convinces you to get in it you can't escape until she let's you out.

Easy to put together, seems to stop draughts and retain heat quite well. The opening is big enough to lift an ender 3 in and out with little issue. Could possibly do with not being as deep but my guess it is as such to accommodate different size printers. It's withheld a few months work without issue. I got the enclosure with the LED light and this is surprisingly lights quite bright. Probably helped by the fire retardant coating on the inside of the enclosure. Oh and it is incredibly lightweight.

Excellent enclosure for my Ender 3 sat in the garage. Winter temp around 6-7deg C - printing temp around 20-25 deg inside enclosure. The LED light works well and the material and zip feel and looks quality. I would recommend putting it together on a bench or table or wooden floor, as the cover is a snug fit on the frame. Use gloves and protect any worksurface when putting it together as the connecting rods leave a black residue behind.

If like me, you searched for an enclosure for your Elegoo Neptune 4 plus, this was likely the first result that came up. Now don't get me wrong, the enclosure is huge and the printer will fit inside it BUT... it could do with being a little bigger. In order to make the Neptune 4 Plus fit, you'll have to remove the magnetic rest for the control screen from the side. Also when you put a reel of plastic on the holder up top, you can no longer properly close it. (Not without cutting a hole in the flap to accommodate the reel) This means if you plan to properly close the enclosure while printing, you'll need to modify it. Also the Y axis of the build plate will push on the fabric at the front and back when it fully extends in either direction. Can't really complain about the material quality though, frame went together pretty easily, although some of the rods aren't even in length. No issues fitting the fabric to the frame, best solution when you assemble the top for me is to remove the front bar at the top of the opening and then fit the fabric to the corners, replace the bar after. The USB light works well, just be aware you'll need an adapter for it if you plan to plug it into the mains. If fold lines bother you, then I have bad news when it comes to the transparent window... But, until someone makes an enclosure better scaled for the 4 plus, this is an okay solution. You'll have to modify it for fully enclosed printing. Otherwise it does a decent job at keeping dust away from the machine when it's not in use. (As long as you remove the reel first).

Great enclosure. I fit an Anycubic Mono 4 in there and a wash and cure station. Plenty of room, without being cramped. Can get the lid off easily, due to room. Easy to build, with instructions and worth every penny. I keep in the shed, which seems to hold the temp well. It holds the stinky fumes in there, keeping the smell inside. I’d advise putting some extraction on there too.

So this thing is huge, it's much larger than my printer but now thinking about it that's nice for being inside to work on something or if you ever want to get a larger taller or wider printer, i have a creality ender 3 s1 inside it with a filament spool on the top of the printer (need to modify the roof with a rubber grommet so i can route in a ptfe tube for my external comgrow dual slot filament dryer - there's not enough room in the enclosure for that and my printer) Assembly instructions are quick and easy, building it takes a minute. It has multiple grommets for cables and a large flap and ventilation port on the left, back, and right sides as pointed out in the video. The frame isn't sturdy until it's in the textile case and then it's firmly held in place on all axis'. I'm glad i got it as ive been doing a lot of PETG printing and getting warping, suffering from the heat generated by the printer and not being able to have a door or window open or my ceiling fan on has been a pain in the bum, and dust and pet hairs get frustrating to deal with after being openly printing for 3 years now, this is a perfect upgrade! Highly recommended indeed!

More than big enough for my Kobra 3 and if I had the Ace fitted to the top of the Kobra 3 uprights that would probably fit in as well. Liking the fact it has a light. Disliking the smell. The material this is made out of has a very strong odour especially when it is warm, possibly from the flame retardant used. All in all this is very effective at containing my 3d printer and as it is more than big enough to fit my Ultimaker 2+ extended I am buying a second one for that.

Item is great value for money. It has helped make sure my prints are dust free and helps to keep the temperature consistent. Great that it comes with a light

Per quanto costa è un upgrade alla stampante 3d incredibile, non ho più avuto alcun problema di warping e fallimenti di stampa da quando la uso, ho iniziato anche a stampare ASA e abs con un estrattore in garage e ha dato nuova vita a una stampante che non usavo più.

Had some intermittent issues with bowing parts; Perfectly levelled bed, even tried using glue-sticks, it got better but could not get rid of it completely. The ambient temp in my basement leans on the cool side so I assumed this was the root culprit. Got this enclosure and my issues are gone. Used a thermometer and noticed it definitely keeps the temperature steady around the 26C (basement is about 19C). Would recommend if you're on a budget like me. Super easy to assemble, the led light is a nice addition. Currently using Prusa MK3S, got the medium size enclosure 25x21x29

Ich habe mir dieses Gehäuse für meinen 3D-Drucker geholt und bin absolut begeistert. Hier sind meine wichtigsten Punkte:Geruchsminderung: Das Gehäuse hält unangenehme Gerüche beim Drucken so weit wie möglich ab. Man riecht im Raum kaum noch etwas.Stabile Temperatur: Hält die Wärme perfekt im Innenraum. Ideal für zugempfindliche Materialien wie ABS oder PETG.Integrierte LED-Beleuchtung: Die verbaute LED-Leiste ist super hell. Man kann den Druckfortschritt jederzeit perfekt beobachten.Gute Passform: Die Maße (550 * 650 * 780 mm) bieten reichlich Platz. Mein Drucker passt samt Filamenthalterung problemlos hinein.Einfacher Aufbau: Das Gestänge lässt sich schnell zusammenstecken und die Abdeckung sitzt schön straff.Für den Preis (besonders im Angebot) eine der besten Erweiterungen für jeden, der saubere, geruchsarme und zuverlässige Druckergebnisse möchte. Würde ich sofort wieder kaufen!

Quedó muy bien para mi impresora Ender 3 S1 Pro

Encantado con el producto. Fácil de montar, ventana muy grande para ver la impresión (aunque el plástico está un poco arrugado y se ve borroso dentro, cuesta distinguir lo que hay en la pantalla de la impresora), buena luz. Por el precio está genial. Y he podido imprimir ASA en mi Ender 3 Pro con muy buenos resultados.