goldenwarm10 Pairs 22inch Soft Close Drawer Slides Ball Bearing Full Extension Drawer Runners 100LB Capacity Heavy Duty Drawer Slides for Cabinet Black Side Mount Drawer Glides Dresser Kitchen

I've installed dozens of these throughout my two remodeled homes. I love them because they are robust drawer slides for most home applications. I can't imagine a kitchen, bathroom, or dresser drawer that you can pack enough into to overload this thing. Plus the ball bearings, while maybe needing a tiny squirt of WD40 now and then, just work so well that it is fun to open and close a drawer. I like that the slide can also be chosen in soft close or not, as soft isn't always necessary or desirable. And, they are (nearly) indestructible and they'll last longer than your kitchen cabinets.I find the weight rating to be a bit misleading. A fully loaded drawer with 100 or 150 lbs of kit in it will definitely not be a burden to the slide when closed or partially open, and won't challenge the bearings and ability to pull or push the drawer. When fully open, the weight will be cantilevered on the third and thinnest rail of the mechanism, and there is no way it will last with that kind of weight, although I've never challenged it that way, and you likely won't either. I have experimented by pulling one all the way out and leaning on it to see how far it deflects--with maybe 40 or 50 lbs, it deflects more than I'm comfortable with, and I fear with any more weight, it might distort and pop out the bearings or jump a rail. While that makes the weight rating a tad deceiving, these still hold more weight than any other slide for your home.BTW, different ones of these, all of which are similar enough, come with either weight rating--100 or 150, and I can't really make sense of that. Some manufacturers clearly cheat a little on the robustness of the build quality--a very little, too little to quibble generally. But this slide is one of the better ones, so I can't figure out why the 100lb rating on it. It is also just a tad high on price, but close enough, unless you need a few dozen in which case a few bucks might really matter.Last comment on weight. The weakest point on the whole system is the screws. These come with 1/2 inch screws and usually are installed with three screws in the cabinet and three into the drawer. Not enough, in my opinion. No reason not to put in 5 screws or even 3/4 or 1 inch screws if you can without penetrating your wood (a lot of cabinets and drawers are made with 1/2 inch material). At any rate, the screws will deform the holes they are in and/or pull out long before you overload the slide itself.

Disclaimer: I received these as part of the Amazon Vine program. Also, my installation is less likely to be the way most install them.As a bit of background I'm building an enclosure cabinet for my 3D printers. I wanted to put both printers on their own pull-out shelves and for them to pull out all the way. Since I'm building it from scratch with only barely a sketch of a design and mostly relative measurements to the items going into the cabinet, installation for these was fairly easy since I used a laser level to mark where the top line and installed them on the sides of the cabinet before I did the measurements for the shelf that would attach to these. This is not the normal way to install drawer slides (However it is the way we install the slides for servers when racking them at work) to my understanding.For the moment they seem plenty sturdy to hold the 1/2" ply and 1"x2" shelf framing plus my Ankermake M5C to the point where they're quite probably overkill even if I stored a few spare 1Kg spools of filament on the shelf with it.

As a crafter and a writer, I put my work areas through the mill. I have, from time to time, pulled out an extention and had it fall completely off...not so good when you have open liquids such as paint or cleaners, or anything else. I have had others give way under the weight of the load. I could be more attentive to these issues, but that would break my concentration (although, I must say, having it fall off will do that too). These are extremely solid,and easily accommodate everything I load on it. I will try not to test the limits, but I know already they are much more durable than the standard slides that come on a desk or in a kitchen slide.

I like making DIY projects as much as the next person, and I've found that I can get really good drawer slides on Amazon for less money than at the big stores nearby. These slides let me use the entire drawer, and I love they enable the full utilization of the drawer, and the soft "self-closing" feature. This feature keeps my everything at the front of the drawer, unlike other regular drawers that slide things backward when being slammed shut. AND I can sleep in without waking up to slamming drawers. These slides are super well-made, good quality with girth. I definitely would get more soon because a pair is never enough.

Super easy to install and even easier to slide. Used these on a set of kick plate drawers as that is always just wasted space and never get used and thought what a great way to use this and put the drawers under there. Many people do this and it does allow for extra room for things that are just not used very often. These are easy to use ball bearing rails that will hold almost any weight you can put in the drawers. Great product and highly recommend this if you need rails for an upcoming project.

This worked great for us! Used it on our coffee bar pull out drawer. Only reason I gave 4 stars instead of 5 is that sometimes it gets stuck a little when pulling out the drawer so you have to hold down the top of the counter top while you pull it out. This might be due to changing out the drawer slides and not this specific drawer slide. All in all this worked great for us and was easy to figure out!

Upfront disclosure: I received this item through the Amazon Vine program for review.I do a fair bit of diy projects around the house and I have found that I get better drawer slides from Amazon for less money than from any of the big box stores near my house. I needed a set of 14" slides for a project and these absolutely meet my needs. They are exactly what I expected. Good quality, the right size, and work well. Definitely would order them again.