GROHEPillar Union Chrome 18121000

Heavily cast brass of highest quality and chrome finish, suitable for all bath tub fittings

Look great and do the job intended almost perfectly. However, there is more thread on one of the pieces than the other consequently when fitted to the bath filler/shower valve and viewed from above they aren't square to the valve body by a couple of mm. I had to get everything fitted and the water back on so have used them and to be fair it isn't really noticeable. Picky? They are a Grohe part designed to compliment the Grohe valve and for c£34 a pair should be perfect.

Bought to go with a GROHE bath/shower mixer tap. Not cheap, but fit the tap perfectly and just "work". There are cheaper (much cheaper) pillars that are available and would probably do the job, but I saw they got mixed reviews and I just did not want any hassle since there is enough hassle already when replacing bath taps (although it was actually the plumber who had the hassle of squeezing into the space by the bath and contorting himself so he could reach things). As with the mixer tap I bought with these, you get what you pay for and these pillars are the best.

Does the job of enabling a 150mm bath filler to mount on a bath with 180mm ago between pipe holes. A bit tight but it works

do the job

Do the job...somewhat pricey. Nice and shiny..at the present.The brass backnuts supplied were very loose on the thread and I reused ones from my existing tap that were had less slack ...and had a slightly larger flat face.

It matches with the tap and works perfectly.

Do the job. Their bases were a bit small for the holes in our bath. This made it hard to get a good seal.