NOVUS 7030 | Fine Scratch Remover #2 | 8 Ounce Bottle

Long story short, I purchased a turntable a long while back and the owner didn't secure it in the packaging. While the turntable was still functional, many small parts were loose and scratched the acrylic surface. A very small amount of the NOVUS fine scratch #2 cleaned it up really nice. Did two passes and got very good results. For the final step I used MusicNomad MN130 as a polish and a wax and the results were just amazing. Could probably do one or two more passes but decided to leave good enough alone...was really worried I might make it worse but you can see the results before and after.

This is an excellent fine scratch remover. Works on paint and plastic, and it also is perfect for removing the haze on car plastic headlights.

The Novus 7030 Fine Scratch Remover #2 is a reliable go-to for polishing out light surface scratches on plastics and acrylics. I used it on a motorcycle windshield and a few old gaming console covers, and it noticeably improved clarity and reduced visible wear. The formula is easy to apply and buffs out cleanly without leaving residue. The 2-pack of 8-ounce bottles is generous and should last a long time, even with frequent use. My only minor gripe is that deeper scratches require multiple applications and still may not fully disappear—but that’s expected for a fine-grade polish. Overall, it’s a solid product that delivers on its promise.

Found this product through a youtube video about Graded Card slab resoration, ordered it to see if it was any good, and seriously its crazy how well it worked, only had to use a few drops, but for anyone who has scratched graded card cases and wants to clean them up this is the right tool for the job, I will include before and after photos too.

I had bought this for my mother to use on her glasses. Money's tight right now, so buying new glasses isn't an option atm. It's a good thing she tested it on an old pair she had because it ate the indoor/outdoor transitioning film off of them (hense the "spotty-ness" in the pictures). It didn't even START to try to take the fine scratches out, despite following the directions to the T. We even tried letting the scratch remover set on the lens for a small amount of time, to see if it would enhance the scratch removing effect.... it didn't. But overall, if you have glasses, I wouldn't recommend wasting your money on this product, but if u still wanna give it a try, PLEASE TEST IT ON ANOTHER SET OF GALSSES FIRST! Because like I said, it really did eat away the transitioning layer! Thanks for reading this review 😉

When my golf cart top and windshield were removed so I could paint the body. The plexiglass was scratched and one area looked like I got a top coat on the windshield. I used a scrubby on that area that made it worse. Now it looks foggy. I bought this to fix my problem areas. at some angles it looks better others no real change. I applied 5 application let it dry then buffed it in. Both sides still looks foggy. The area with the one long scratch is gone from most angles but the other looks no different.

Great polish for fine scratches. I have used it on headlight covers (typically poly-carbonate), ABS, Clear PVC and it has done well on all of them. The depth of your scratches is what determines how course a polish you use. I start with a finer polish and if it doesn’t do the job then use a courser polish. Novus has a number 3 (courser polish). You always have to use the finer polish after the courser polish so you have to use the 2 polish again, but it is an easier means of telling which will work. I would be hesitant to use this on a touch screen as there can be invisible circuitry (indium tin oxide) very close to the surface and what the material is. Unless you know and understand the tech then usually best not to mess with it. Heating trinitrotoluene on the stove would be bad if you don’t know what you’re doing. It’s TNT. It does seem to leave some coating on the surface but it is NOT like many of the ‘wipe on fill type’ product to improve clarity that don’t last.. If you don’t have to rub it (or shake the bottle) then it isn’t really a polish. And while it might take a bit longer than the chemical melting wipe on type, you have much more control and less chance of messing up the surface. At worst (unless you go too fast and melt the plastic) you will end up with a clear depression in the material. I would like it to last a little longer before drying but in the hot Texas sun everything probably drys faster. After talking with the manufacturer they say that water can be used to wet the surface as long as you don’t dilute the polishing compound. This drill brush worked well https://www.amazon.com/gp/product/B003VIGPG6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Although these might work better as they don’t expose the polish to air as much and so it might last longer as liquid. I am polishing the inside of cylinders so needed something round instead of disk. For just headlights I would try these. https://www.amazon.com/Foam-Drill-Polishing-Inch-Buffing/dp/B076ZJMHB1/ref=sr_1_3?ie=UTF8&qid=1537911177&sr=8-3&keywords=foam+polishing+pad+for+drill

I bought this to polish pinewood derby wheels for my son's pinewood derby car. I did some sanding with a piece of 1,000 grit sandpaper and then adding this to polish through the imperfections. I could easily see a change in the condition of the wheel and the car ran slightly faster on the next text run. I did initially receive the wrong product in my order. I contacted the seller and they shared an Amazon customer service number that I was able to use to get a replacement.

Utilisé pour polir le corps d un écumeur en PPMA, très efficace après plusieurs passages.

Bra produkt fungerar mot mindre repor på Vinylrutor på tar bort rester av impregneringsmedel och annat kladd. Läs test: https://www.practical-sailor.com/boat-maintenance/whats-the-best-way-to-restore-clear-plastic-windows

ho usato questo prodotto per lucidare e togliere piccoli graffi (poco profondi) e opacità da un parabrezza di un aeroplano in Pexiglass con risultati soddisfacenti. Non è a mio parere da usare su materiali tipo lexan che hanno una superficie meno dura . Un buon prodotto.

Doze it's job, good for me 👍

Was ok didn’t remove the scratches but was very bad scratched CD case