Bus Bar Power Distribution Block Battery Terminal12V-48V DC Bus Bar 1 pcs,4 x M8 Terminal Studs with Cover and Ring Terminals for Cars RVs Ships Yachts，Red

Works very well for the price and down the job and it's not as expensive as some bus bars on the market

Seems well-made, no problems found.

This pair of busbars is the proper way to distribute high current around a vehicle or vessel. On boats it is not good practise to use the frame and hull for return current to the battery. Even on vehicles where (nowadays usually) negative earth systems are employed it is sensible to distribute high power through both positive and negative cabling. Hence the need for two buses - conveniently one red, and one black.The bus bars come with clear plastic Housing which will prevent short circuits. As a bonus that's all bag of crimp terminals is also included. Don't forget the shrink wrap. These are well constructed bus bars and very good value for money.

This is a very simple way to add multiple take-offs for power on all types of vehicles. I've used it to add more 12V positives on a classic car for additional electric items.It's a tidy add-on that's very useful. I can recommend it.

This is a really good pair of 100amp bus bar terminals which really does keep the wires from your batteries ordered, tidy and safe.They are made to a really high standard and are easy to fit.Each bar has 4 terminals on it.Great price and i would easily recommend it...

I got this as I needed to sort the wiring in my caravans solar setup.I have a few items connected to two of these and they keep the wiring tidy, they also come with 4 terminal cramps but you may need to buy other sizes to fit your cable size

I converted my van to a camper a few years ago and have recently been upgrading the 12V electrics with a new leisure battery and other components. As the vehicle has negative earth, anywhere on the bodywork acts at a negative connection, so only positive cabling is required for most components.This bus bar effectively adds multiple connections to the positive terminal of the battery, essential for my new LifePo4 battery which only has small terminals. A single feed runs from the battery to this bus bar, and then individual cables run to the various components, generally with inline fuses in place.The larger bolts require fairly substantial round connectors, but fortunately this bar also has smaller screw which accept much smaller connectors, so I didn't need to replace any of the connectors to get them to fit.The red cover provides sufficient protection against shorting and acts as a reminder that all connections should be positive only.At £13 the priceis fine.

⚡ I was quite excited to receive these distribution bus bars, as I had been looking for something like this to install in my caravan for 12V power distribution. There are some important aspects of the design that are well done, such as the bolt-down covers to protect the terminal posts from accidental short circuits. Each of the bus bars has a pair of mounting holes, although you will have to provide your own hardware for this.⭐ I really like the following features:👍 All of the terminal posts have been fitted with split spring washers, which makes for a really secure connection once the nuts and screws have been tightened down.👍 There are three smaller terminal attachment points for low-current connections, and these could be suitable for connecting vehicle trackers and other accessories where you really only need a trickle current.👍 The bus bar material is substantial enough to transmit the current freely without significant resistance across the bar.⚡ There is nothing to dislike about these distribution bars, and they work very well. The terminal posts are M8, which is the exact size that I want, and are coated for corrosion resistance. The current capacity is exactly what I need, if not more so. Fitting the terminal blocks is very easy, and it is more a matter of positioning the blocks in a suitable place for the wiring. I am very pleased with them. ✔️

These are very good bus bars for a wide array of jobs. They are pretty heavy-duty and are perfect for boat applications. It comes with a few extras but the bars themselves are great quality. I also like the covers they are a very nice touch.

These are definitely beefy buss bars. The studs (8mm?) are about 3/8" studs, so pretty big.If you are doing a solar installation, custom battery setup or building out a cargo trailer, these are a perfect solution to multiple heavy gauge wire connections.

The media could not be loaded.  Mir gefällt es sehr. Es ist sehr nützlich, es als Verteiler für Solarpanelkabel zu verwenden. . Es besteht aus sehr hochwertigen Materialien. absolut empfehlenswert. Preisqualität eine 9.

Die Verteilerblöcke machen einen sehr robusten Eindruck. Die Muttern haben eine große Auflagefläche und die Abdeckung hält stabil über die Kunststoff-Hutmuttern. Die beigelegten Ringkabelschuhe sind ohne Isolierung und deswegen werde ich diese wohl nicht verwenden, aber es sind immerhin welche dabei. Zum Befestigen der Blöcke sind 4 Blechschrauben mitgeliefert, diese kann ich nicht bewerten, da ich die Schienen mit metrischen Schrauben befestige, sie machen aber vom Aussehen her einen vernünftigen Eindruck. Alles in Allem kann man mit diesem Set für diesen Preis nichts falsch machen. Um die Muttern anzuziehen benötigt man entweder eine lange Nuss oder einen Ringschlüssel, da die Abstände der Bolzen zu kurz sind, als daß man da vernünftig mit einem Gabelschlüssel arbeiten könnte. Das ist für mich kein negatives Kriterium, da mir der Bauraum hier wichtiger ist, sollte aber erwähnt werden.Von mir eine ganz klare Kaufempfehlung

This 2 pack of bus bars are thick and beefy, these can handle a lot of power. They are well made. 4 large and 3 small power posts, This would be great for car, car stereo, RV, or solar protects. It made installing new solar panels and batteries in my RV, very easy.