SHDIATOOL Diamond Core Drill Bits 1-3/8 Inch (35mm) for Porcelain Ceramic Tile, Granite Countertop, Marble, Stone and Masonry Brick Vacuum Brazed Hole Saw with 5/8-11 Thread

Summary: Adding a few grab bars to dad's shower. I used a lot of products for this project, so including all related products in this review. Recommendation: 1) When mounting grab bars, it's always easier if you can find the stud to attach to. In this vertical install, I decided to use a stud and Wing-Its anchors; partially because I wasn't sure I could hit both, and didn't want to put two fasteners vertically (on either the right or left only), but that would also position the bar in the shower a little too far in (towards the shower control). 2) The WingIts requires a 3/4" hole through the mounting material. For tile, this can be especially challenging. I used the SHDIATOOL diamond 3/4" bit, with the DRILLAX adapter to get through the tile, and then used the 3/4" BOSCH bit to finish through the dry wall. Also used the BOSCH bits for the other small hole. Having the right tool for the job is the difference between project completion, and a messy, disaster. Related Products: Moen R8924P Home Care 24-Inch Concealed Screw Bath Safety Bathroom Grab Bar, Peened ~ $30 Pros: Moen name, includes stainless screws. Cons: None. Conclusion: 5-stars https://www.amazon.com/gp/product/B001EI0TJ4 Structural Grab Bar WingIts, PK2 ~ $14 Pros: Heavy duty, highly rated. Cons: Cost ($7/anchor). Conclusion: 4-stars (cost) https://www.amazon.com/gp/product/B004CCRJWO SHDIATOOL Diamond Core Drill Bits 3/4 Inch ~ $13 Pros: Right tool for the job, looked brand new after drilling two holes (with proper technique, including cool water). Cons: None. Conclusion: 5-stars https://www.amazon.com/gp/product/B07213KCN9 Drilax Core Drill Bit Arbor Adapter ~ $15 Pros: Allows SHDIATOOL bit to be used with drill (instead of angle grinder). Cons: Cost (a little expensive). Conclusion: 4-stars (cost) https://www.amazon.com/gp/product/B0737H7CMX BOSCH GT3000 Carbide Hammer Drill Bit Set ~ $25 Pros: Cuts great; carrying case. Cons: None. Conclusion: 5-stars https://www.amazon.com/gp/product/B001GNC8RS

These core drills worked great. I cut holes for studs in some granite slabs being attached to the front of my house to mount lights and an address to. It’s a bit of a hassle removing and plunging out the cores after each hole cut but I tried using a couple other methods which resulted in destroying the slabs. For my application, these were exactly what I needed. I ended up reaming out the wax material as it seemed to make the bit clog up more and make it difficult to get the cores out. I was able to use water instead for my project.

I have to admit that this drill bit is a life saver. Trying to install a RO for my daughter but the "no hole on granite countertop" was a barrier to me. Never thought it's possible to drill the hole by myself, as a minor mistake could be very expensive. However, after some research I realized it's very doable, with the right tool and caution. So I found this wonderful diamond drill bit at a very reasonable and affordable price. Received the product in the next day, and the drilling is just like cutting into butter. I'm not a pro and is at average handy. Just follow the 4 steps instruction: 1. Initialize the drill at 45 degree angle 2. In couple seconds, the drill bit does the job to cut into the stone. 3. Now while maintain the contact of the drill bit to the stone, slowly move the drill bit to upright position and continue the drill process 4. Continue the drilling while slowly swaying the drill in a cycle I did the dry drill, and in just 4 minutes, job was done!!! And, the drill bit still looks as new after it! I did read thru those reviews with bad luck. From my experience, I believe the following tips are critical for a happy result: 1. Do NOT push the drill too much. Let the drill bit, not your muscle, do the job to cut thru the stone. The weight of the grinder is enough to drive it thru. 2. Do it slowly and patiently. Time is your friend for a beautiful cut. Some other helpful tips: 1. Wear eye protector and hearing protector. It's loud! 2. Have a 2nd pair of hand to hold the vacuum around the hole to control the dust. Lastly, thank Amazon and "Made in China" to bring such affordable products. Otherwise, will have to spend 5X more easily to get pro... Overall, highly recommended.

Worked perfect. I used a variable speed trigger switch 4-1/2” angle grinder and couldn’t have asked for for better results. Cuts quick and outlast the Lennox and Milwaukee brands that I’ve bough and used for years from the big box stores.

Great for cutting tile and marble. Best to use wet while cutting.

Very impressed, I’ve drilled multiple holes through porcelain and ceramic tile with these and they are awesome. Using these on an angle grinder is the only way to go, probably 4x faster than the ones for a drill and they hold up way better too.

This hole saw chews through tile like it’s butter. It made easy work of a hood vent install when the wall was tile and drywall.

It would not thread completely into a standard hole saw mandrel (2nd pic) Made it about half way and it locked down like the thread pitch was off. Put it in a vice and locked it down w a wrench. Sacrificed a mandrel for it, no biggie. Start real slow and angled till u get a groove then straighten up. Worked good and was 1/3 the price of one at Lowe’s and HD. The granite core stayed stock in bit so I either have to figure out how to beat it out or it’s a one and done bit. If I have more than one hole to do keep that in mind. Would buy it again.

Easy to make a hole on quads countertops

Es buena atravesó rápido el granito

Muy mal el material de la broca, solo aguanto dos cortes y se rompió, y Amazon no tiene garantías

These bits are amazing and quick to make the desired holes

Apprécié par les plombiers! Je vous aurait bien pris une photos mais ils sont partis comme des petits pains chauds. S'accroche sur un grinder et facilite le percage de trou pour nos installation de porte de douche.