Thermal GrizzlyTG Putty Pro - 30 Gram - High-Performance Electrically Non-Conductive Thermal Putty for GPU and PCB Applications

Little expensive but my Sapphire NITRO+ RX 7900 XTX graphics card was overheating, I would launch Cyberpunk and immediately the GPU would be over 100C. I first tried the basic version of this product and it was still overheating. After using two 30g tubs of Thermal Grizzly Putty Pro my card hasn't gone over 80C. Very good stuff just one tub of this stuff isn't enough to do a whole RX 7900 XTX and a little on the expensive side.

Applied this to my 4090 in an Optimus waterblock. Coupled with a Kryosheet on the cards processor, this thing is super cool running. Idle temp is 27C and max under benchmarking never gets above 41-43C. Card is undervolted to 950 mV, GPU is clocked at 2945 MHz, and RAM is at 12501 MHz.The stock thermal pods performed 2-3C hotter than this putty. When every degree counts, thus stuff is magic.1000% recommend

Great stuff, works as expected

I bought the Pro version of the putty and so far it works great. All the memory temps are within acceptable values. Temperatures for the VRAMs hovers around 50C when I am gaming. I own a MSI RTX 4080 Trio X.Now the bad part atleast for me. This stuff is messy to work with. It's more like wet cookie dough than putty and it's more soft and smeary when it starts to warm up in your hands. This makes it extremely hard to form and apply onto the VRAMS. I have used the mini paddles that they included but it's still difficult to apply. I feel like they should put this stuff in a very large syringe or something.

VRAM on my 7900XT was hitting 104C at the default power limit while undervolted and running at only 2500mhzAfter applying TG Putty Pro I am now maxing out at 84C even with 2750mhz clock & 15% power limit.Tiny 30g tub was enough, even had a little bit left over.Well worth the money imo

This thermal putty is a must for anyone looking to preserve an older GPU. I currently have a 2080 TI that was running a bit hot, reaching temps of about 86°C. When I opened it up and replaced the old thermal pads with this putty, it dropped my temps to 39°C. I really recommend this product. It is pricey but worth every penny in my opinion.

Hard to work with and temperatures are about the same as the pads my gpu came with. Also, 1 order of this putty is not enough for the bigger cards.

Used in rtx 4090 water cooled build, I couldn’t thermal throttle my gpu even if I tried to. this is a phenomenal product, it is a little different to shape and apply but completely worth it