Amazon Basics Single Computer Monitor Stand with Cable Management, Height Adjustable VESA Desk Arm Mount, Fully Adjustable Tilt and Rotation, Steel, Black, Fits 13-30" Screens

Exceptional value for the money. Rock solid support, great range of motion. The monitor mount’s vertical support pole is a sturdy 1.9” in diameter (others are mostly only 1.37” in diameter) and designed to allow monitor and power cables to be threaded discreetly down through the pole; exiting out the back just above the surface level of your desk. The extra-wide diameter permits the threading of full-size power plugs, HDMI, and DisplayPort cables through the support pole. A two-part plastic plug can be placed into the top of the pole after running your cables for a nice and tidy look. Unfortunately, the vertical pole only seems to be available in a 16” height; and if your are unlucky enough to have a stupidly designed monitor like my 28” 4K Samsung U28E590D, with the VESA attachment point at the extreme top edge of the monitor, this will likely be too short to earn you any extra room on the surface of your desk. In fact, it hangs the monitor several inches lower than the monitor’s own included stand. * I tried mounting my monitor upside down, as flipping the display orientation in Windows and MacOS is simple as can be, but my Samsung Monitor just wouldn’t submit. I don’t know if it is a polarization issue or a LCD under stress issue; but the flipped monitor winds up entirely washed out (dark, reflective, and deeply purple tinted) on the button half when viewed directly as one normally would. Mounted upside down, one can only see the full screen clearly by leaning the monitor 45° or more backward, which obviously is not practical at all. Other monitors might better handle being mounted upside down, and one should attempt this if they have a monitor with a similarly off-center VESA point. I’m disappointed in mine, as mounted upside down I only needed 12-13” of the 16” pole to have 6-7” of clearance under my monitor.

The Amazon Basics Single Computer Monitor Stand is simple and does exactly what it needs to. Pros: - Sturdy and stable - Good height adjustment - Easy to assemble - Great price Cons: - None noted Perfect basic solution for a single monitor setup. Highly recommend if you want something reliable without spending a lot. Would I recommend? Yes, 5 stars.

I got this product preowned for $10 cheaper and it was so worth it! I had no problems and everything was in the box. The monitor stand works great and the instructions were easy to follow. You can tilt the monitor multiple ways and it is made to be a universal fit for monitors. Looks great and holds the monitor well.

It's a nice and sturdy arm. I just wish it could raise higher. I've installed a 27" monitor on it and I'm pretty much limited with keeping it just below eye-level. Luckily I have a sit-stand desk so I can adjust it when I stand but when I sit, it sucks that I really can't adjust it. If you just need it to statically stay put at a certain height, then this is a good product. It holds the Dell 27" monitor pretty well. Extending it forward and backward is smooth. I did have to loosen up the bolts some as it was too tight where I would be moving my desk when trying to push and pull the monitor.

surpisingly, this is a super high quality copy cat. very little wobble, especially compared to gas tube arms. and the quick release latches on the monitor plate and body tube are something I never knew I would appreciate. First time I can comfortably throw away a box because I knew Ill be keeping it for years. Carries my 32in 4k display perfectly fine

Ordered on a whim, Wasnt sure if i was going to like this rig but i figured ill give it a shot. Arrived about 4 hours after i placed my ordered and after putting it together and setting it up i was very surprised. Its currently holding my Samsung 27 inch monitor and it is rock solid and has a very firm hold when adjusting the angle and adjusting the height is as simple as flipping the lever on the back and adjust and your done, Once youve set it just throw the set screw in the back for the extra hold ( NOT needed). Compared to my other mount holding my 32" monitor? This one is more compact. easier to adjust and holds my monitor is place where i set it better, plus its about 35$ cheaper. I Will be ordering another 1 for my 32" Monitor

My god, I've assembled dual and triple monitor mounts and had less of a hard time than I did putting this thing together. First off, WHY DO YOU HAVE SO MANY DIFFERENT SIZED ALLEN WRENCHES?! Did I count 4...5? You have to be kidding me. No mid-sized furniture should ever require more than two, LET ALONE A DESK ACCESSORY. This is the most needlessly complicated assembly I have ever seen in my life and it even came with written instructions. The washers behind the mounting plate is the most superfluous step I've ever seen. It's completely unnecessary unless you plan on having your monitor mounted for...hmmm, 10 maybe 15 years. 99% of consumers with a desktop setup at home don't even keep their monitors for that long. A MONITOR WILL NEVER NEED WASHERS TO HELP SUPPORT ITS WEIGHT BECAUSE THEY HARDLY WEIGH ANYTHING. I have done VESA mounts for decades and not a single one of them asked you to put washers behind the mounting plate and pray they stay at bay. Just my luck, the last one got jiggled out of place by my screwing in the other 3, and there I was with two toothpicks, playing the lamest game of hockey in world history, mumbling under my breath about how I hope contagious explosive diarrhea makes its way through whichever R&D team was responsible for this. I've mounted ultrawides and 55" TVs in buildings that didn't allow stud mounting (studless mounting plate, basically 30 nails to significantly redistribute the weight), and they didn't require washers. Amazon, I'm a big fan of your electric screwdriver, your shelving, your jeans. Stay the heck away from anything involving mounting. You suck at this, so badly.

This is reasonably good monitor stand. When fully assembled, it has decent range of motion: it saves desk space, and doesn’t require drilling. Previously, my keyboard was right at the edge of the desk and was uncomfortable to use for more than an hour or so. Now, I can fit the keyboard + wrist rest and still have a few inches. But, and it’s a big but: the instructions regarding both tilt and rotation are horrible. The manufacturer must have realized this because they included a separate page which, somehow, has even less helpful instruction. The key issue is droop. By default, it will be at an obviously-downward angle. No big deal, just tighten something, right? Wrong. The added instructions say to tighten a specific nut using the Allen key (one of three included, for some reason… just use the same-sized drive recess for all of the bolts.) Well, you can tighten that thing until you’ve nearly cracked your monitor from tightening it so hard… it’s going down, down, down until it droopier than the cartoon character. What you *actually* need to do is *loosen* the boot, set it to a few degrees above where you want it, and *then* tighten it. There is some kind of block at 90 that prevents you tilting it up while the bolt is in. Once you’re past that you’re good. I messed around trying to get it to be 90 degrees that I almost returned it. Silly instructions. Anyway, nearly all mounts will sag a little bit on the x axis, which is why this mount has a slight pivot to allow you to compensate. If you have a requirement for straight lines and can’t deal with your mount being ~88 degrees to your desk with a slight pivot to the monitor to make it level, then this isn’t for you. I’d recommend a mount/arm with an arm closer to the desk. Those are easy to get to exactly 45 degrees. (Personally, as long as the monitor is level, I don’t care.) Somebody else stated this didn’t have the ability to rotate. They are incorrect. Other than that… there isn’t much to say. 10 minutes to install, 30 minutes wasted with one bolt. Hopefully, they address this in the instructions to make this a 5-star product. Oh, and it comes with M4 and M5 bolts if your monitor doesn’t have them. If you’re using a screw driver, they’re 3/16 and 5/32” hex bolts.

I was genuinely surprised by how well-built this monitor arm is, especially for the price. It feels sturdy and holds my monitor securely without any issues. One thing I really liked is that it offers two mounting options. You can either use the included desk clamp, or if you prefer a cleaner, more permanent setup, you can drill a hole in your desk and mount it through the desktop. Having both options makes it much more versatile and means it should work with almost any desk setup. Overall, it’s excellent value for money and I’d definitely recommend it if you’re looking for an affordable, solid monitor arm.

I recently got the Amazon Basics Single Monitor Stand, and it’s been a game-changer. The build quality is excellent — solid steel that feels very sturdy and stable. The height adjustment is smooth and precise, making it easy to position my monitor exactly where I want it. It also frees up a lot of desk space, which makes my workspace feel much cleaner and more organized. Installation was straightforward, with clear instructions and all the necessary hardware included. Overall, a simple, durable, and highly functional monitor arm that I would recommend to anyone looking to improve their setup.

Works as intended. Was easy to setup

Design e Costruzione: Il supporto per singolo monitor di Amazon Basics si presenta come una solida soluzione per chi desidera liberare spazio sulla scrivania. Il design in acciaio nero conferisce un aspetto moderno ed elegante, integrandosi bene con la maggior parte degli ambienti lavorativi. Facilità di Montaggio: L'assemblaggio del supporto è abbastanza intuitivo, con istruzioni chiare e componenti ben etichettati. Anche chi non è esperto nel montaggio di attrezzature simili dovrebbe riuscire a completare l'installazione senza difficoltà e in tempi ragionevoli. Regolabilità e Flessibilità: Il braccio regolabile in altezza offre una notevole flessibilità, consentendo di posizionare il monitor a un'altezza e ad un angolo ideali per la postura dell'utente. La rotazione e l'inclinazione agevolano la personalizzazione dell'angolo di visione, adattandosi alle esigenze di lavoro o di gioco. Compatibilità del Monitor: Il supporto è progettato per ospitare una vasta gamma di dimensioni di monitor. La sua struttura robusta sostiene in modo sicuro anche monitor più pesanti, fornendo una soluzione universale per diversi modelli e marche. Stabilità: Il supporto si attacca saldamente alla scrivania, garantendo stabilità durante l'uso quotidiano. La struttura in acciaio è resistente, riducendo al minimo le vibrazioni e le oscillazioni indesiderate. Prezzo: Considerando la qualità costruttiva e le funzionalità offerte, il prezzo del supporto Amazon Basics è competitivo sul mercato. Rappresenta un investimento ragionevole per chi cerca una soluzione di montaggio affidabile senza spendere cifre esorbitanti. Conclusione: Il supporto per singolo monitor Amazon Basics si distingue per la sua semplicità di montaggio, la flessibilità di regolazione e la stabilità garantita. È una scelta consigliata per chi cerca un modo efficiente di organizzare lo spazio sulla scrivania e migliorare l'ergonomia del proprio ambiente di lavoro. L'ottimo rapporto qualità-prezzo lo rende una soluzione attraente per una vasta gamma di utenti.

Super