IMBZBK Privacy Screen Protector for Samsung Galaxy Z Fold 8 Ultra/Z Fold 7 | 2+2+2 Pack, 9H+ Hardness, Military Grade Shatterproof, Case Friendly, Bubble Free Auto-Dust Removal

I bought this to replace the screen protector on my flip 4 that started to delaminate at the hinge after about 9 months. I was concerned this protector wasn't going to adhere to the screen as well as the factory installed laminate screen protector, but it worked extremely well. My screen looks new again and the feel on the screen is good. This protector has a soft feel to it and after a few days it has stayed stuck on the screen with no bubbles or issues, except I missed a tiny piece of dust in the corner (but that's human error. ) I highly recommend watching their install video several times so you know how to do it before even starting. The only issue I have is that there is no notch cut out where the front camera is, so if you take many selfies and need to have the pictures as detailed as possible, having a laminate, clear screen over the camera might affect the picture quality. Outside of that camera notch issue, my screen looks new again. If the protector doesn't hold long, or delaminates, I'll update my review. Very happy with this laminate screen protector for my flip 4. UPDATE: After close to 6 months, my replacement screen protector started to crack in the hinge of my flip 4. I can still use my phone just fine, but the crack will lead to some air bubbles after opening and closing. I've also been out in the colder air and that does seem to have an effect on making the protector a little more brittle around the crack with some peeling away from the screen. So, I'll be reapplying a new screen from the original order I still have sometime soon. I'm now expecting to get about 6 months of use for each screen protector if applied correctly under fairly heavy use of opening and closing the phone. Assuming my 2nd application of this screen protector goes as well as the first time I replaced it, I would probably order more of these when I'm ready for a new pack since I now know what sort of lifespan to expect.

I was concerned because of the review,s but I had not set up my fingerprints yet and I used upon my first initial setup. I set the fingerprints to extra sensitive and made sure my fingertips were a little moist. Set up was pretty easy, I put the same finger in twice for good measure and it worked perfectly fine. This screen protector is actually pretty much edge to edge, but worked fine with my phone case without any issues. There's no front camera cut out but I don't see any issues, pictures /video come out perfectly clear and because of that you cannot tell there's a screen protector on it at all. Also a bonus that it comes with application guide holder for perfect install and 3 camera lens protectors for the back. I'm not using them because I got an ESR full body case that came with circle covers which I actually prefer over this style, but if I didn't have that option, I would use them. For the price and value ($5.99 at time of purchase) I'm actually very satisfied with this screen protector and the accessories it comes with. Not sure what the drop rating is on it but they're really clear. I did have one crack on me in the corner and had to replace it. Not sure what I hit but the case I had before didn't really have good side protection and it could have cracked when I hit something possibly, not sure but the screen was fine underneath. But now I have an ESR full protection case with much better side protection which I really like and recommend as well. Definitely recommend these screen protectors if looking for something that works with your fingerprint scanner and budget friendly. Tip: If you already have your fingerprints beforehand, I suggest deleting them and then resetting them up with the screen protector on.

Absolutely amazing screen protector, I’ve had a few that never let me wipe fingerprints and just look dirty after a couple weeks but this feels and looks good after a while. And the fact that it comes with three is incredible. Very cheap price for a great product. DO NOT PUT ON THE CAMERA PROTECTION PIECE!!!! It will most certainly not fit in any case you have and also almost impossible to get off. I tried taking mine off immediately after realizing it wouldn’t fit that well and it shattered everywhere glass all over! Just buy for screen protector great deal and product otherwise!

Excellent screen protector for my iPhone 17 Pro Max! I was a bit hesitant at first as I’ve never purchased this brand before but I was pleased by the quality and application process. It was easy to apply with only a few minor bubbles that I had to work free, fits my phone perfectly, and doesn’t affect the touch sensitivity or screen clarity. It feels durable and has already protected my screen from everyday scratches. Great quality for the price—I would definitely recommend it and buy it again!

*****UPDATE***** 6/10/22 Despite my dismay, I've had to continue applying a new one of these every couple weeks, while shopping around for one that works better. Well in the meantime, I dropped my phone and learned that you can add one more flaw to the list for this Screen "Protector": It doesn't Protect anything. My screen got cracked anyway. This screen protector is pretty much only good and protecting against minor scuffs in your bag or pocket. It will not protect against much else. ****UPDATE**** 4/25/22 I'll leave my original Review down below. About the only good news since I've used this product, is that I found out my original issue was indeed a defect. I got the replacement order, and the first one went on smooth as silk. Yay!!! Buuuuuut, here I am two weeks late.....and the film has been shifting all over so bad, that it's finally getting to the point that I can't ignore it and just keep straightening the kinks out. Which mean, btw, that it started sliding and bubbling with the first week. C'mon now. I don't care if this was a life saving, world hunger ending product. If any screen protector doesn't stay firmly in place without any sliding, bubbling, or falling apart for a minimum of 6 months to a year, it is absolute garbage. I think it's time to go back to my trusty old, cheap glass protectors. They start to chip and piece on the edges after a good while. But I'm rough on my phone, and that take months and months. Plus, since it's a glass protector, it doesn't bubble or slide ever once it's set, it will just slowly start to chip off tiny little pieces on some of the edges, but it takes a long time, before they are bad enough for me to swap it out for a new one. Bottom Line.....if you buy this product after reading the reviews(or Not Reading the Reviews), You deserve a crappy screen protector. I sure did 😁🤦🤦🤦 Time to Upgrade!!! Whoot! ****Original**** First off, I'd like to say, I didn't think I could get excited or be impressed by a screen protector. But I've always used super cheap ones that don't come with any sort of guidance system, so it didn't take much to impress me. But I genuinely got excited by the level of detail they put into this product and process. They got a whole step by step video and all the neat tools to walk you through thoroughly cleaning and clearing the screen before application. So in walking myself through the steps. Cleaning. Clearing. Alright so far so good. My screen has never been cleaner. And then.....I go to begin applying the screen protector, and much to my surprise and dismay, the screen protector/applicator ITSELF is spitting this dust like mess all over the screen. Right at the splitting point, as I'm pulling back the applicator to run the card down the phone, to begin applying the actual protector, there is a powder like substance spewing all over my phone from underneath the removable film. This is going to be hard to understand unless you're familiar with the installation process, but at this particular step, the phone is squeaky clean, and your hands are full. You've got one hand on the applicator - pulling it back to reveal the real/permanent protector adhesive, so you can begin sealing it down on the phone - and one hand on the squeegee, guiding the protector adhesive down the phone screen for it to begin setting. You do this process once for the top of the phone and once for the bottom because the protectors removable film is split between both sides. The crust, dust, or powder that came out, came from that place where those 2 sides come together, only to be released once the two sides of the protector's removable film, has been separated. In short, at that point....you've jumped out of the airplane. It's too late to ask for a parachute. You're committed. So if the applicator itself is dropping dust on your screen at this point, there is nothing you can do about it. Now....when this happened with the first application, I was bummed but not too worried. I assumed it was a bad piece, or maybe even that I might have missed a step or messed something up. It wasn't until it not only happened a second time, but was even worse. Despite the fact that this is definitely a manufacturer defect or design flaw, the last thing in the world I want to do is leave my phone unprotected and expend the little energy I have writing this review and returning all this stuff/finding something new to order. I just want to protect my new phone and play with it. But I did everything in my effort to try to remedy the issue and clean up the powder as I was holding the applicator up, but there was just no way to make it happen with anything short of 4 very agile hands. Which I do not have, and my dog is too lazy to help. So all this to say.....unless this is a 1 in 10,000 defect, I think this is a product to stay away from. It's got all the awesome design features to make it the coolest screen protector I've ever used. But if this is par for the execution of all of that thoughtful design, it is left wanting. Now, I'm happy to be proven wrong. Heck I hope I am. I hope I simply got a bad item, and am quickly shipped a working replacement that goes on smooth as butter. I will gladly update or remove this review. But for now, the verdict is, keep searching for the right fit for you. The last thing you want to do, is buy a protector thinking it's gonna be what you need, flop your way through multiple failed attempts to apply the protector, and then find yourself stuck between a rock and a hard place. "Do I leave my phone unprotected until I find a replacement, or do I try not to lose my mind starring through a pile of pixie dust everytime I look at my phone screen?"

I got my new S22 Ultra in early March and needed to get a screen protector(this is basic for any new smartphone purchase), so I got a tempered glass screen protector, it was a two-pack. I went ahead and installed it, it looked and worked fine, but I was having issues with the fingerprint scanner not registering my fingerprints. I had to re-register my fingerprint every few days, which was a real hassle and problem for me not to mention was very annoying. So I was in the market for a new screen protector. I then saw this three-pack of screen protectors, which has a bunch of great extras. It was very easy to install, with no issues whatsoever. It looks solid and had no issues with the fingerprint scanner reading my fingerprint at all, everything was great, and it didn't cost $50 either. But...after countless uses over a few weeks, the screen protector started to move from one side to the other, very slow at first, but eventually, it started moving too much which caused a bunch of bubbles. I went somewhere today(there were no bubbles), then I took my S22 Ultra out of my pocket, and then all of a sudden, there were a ton of bubbles. As the photos above indicate, Day 1 = no bubbles, looked great, then on Day 21(three weeks), bubbles galore = trash. So, if you are in the market for a new screen protector, this is a solid one and at $12.99 for a three-pack, you can't go wrong, BUT, if you don't want to be annoyed every three weeks or so because the screen protector decides to take a nose dive and start bubbling up which is rendered useless and has to be removed, then you should probably look elsewhere. I'd request a refund, but I doubt they'd give me one.

Short answer: I've tried multiple brands (See my other reviews) and they have been horrible. This one isn't. It's been on one of our phones for a couple of months now and still looks new, no issues. Long answer: First, I prefer matte finishes, and this is the standard clear/shiny finish. I tried a couple of other brands with the matte finish, and they all had issues. Some with tons of bubbles ( And a fake video install with screen on to hide all of the bubbles when they did it). The problem with both the other brands I tried was the fact that the edges would peel up no matter what you did within a day or so. This is on a new phone (2 months after we got first one) so it went from factory screen protector to the matte ones. Still had a ton of issues. One brand was a full screen and the other a "case friendly" one. Neither mattered, it was the same issue. After seeing how well this one was doing on the first phone, I decided to just go with it on my phone. Install was easy as this kit includes everything you need to get it on straight and bubble free. **Be sure to watch the install video first, it will make install a snap.** Once on, it's very clear and you don't notice it. The fingerprint reader, still works the same too, which is nice. Also we compared this finish to the matte finish I had on my phone outside and this one was actually a bit brighter screen wise and didn't really show any more glare than the matte one did. Indoors it has a bit more glare than a matte finish, but once the screen is on and you are using it, it isn't even noticeable. Also, I do like the extra clarity when looking at photos on the phone, over a matte cover too.

(This is NOT a paid or otherwise incentivized review. Bought with my money). I was hesitant about buying a TPU (aka "soft") screen protector. While I think they do a job of better protecting the screen, while also being more durable than tempered glass (because they're soft and do a better job of absorbing an impact), they've always been "sticky" with swyping or stylus usage (long time Galaxy Note user). Tempered glass of course solved those issues, but not as durable. With a million choices to choose from for my S22 Ultra, one thing was clear. The new fingerprint reader definitely has issues with tempered glass protectors, which narrowed my choices down to TPU. Honestly, I took the three highest reviewed TPU protectors and picked one at random as one was seemingly no better than the other. This one did include the camera protector for the extra $2, which was nice. Upon opening it, it was nice to see that it was a very complete kit. 6 wipes and microfibers, 1 install squeegee, 1 alignment tool, 3 screen and 3 camera protectors. Printed instructions are lacking, which I prefer, but the video does a great job of showing the process. This has been my experience so far, within the first 15 minutes of installing. I will update if anything changes. As far as the protector goes, installation was pretty easy. WATCH THE INSTALL VIDEO FIRST! Then, starting with a CLEAN phone, start the installation. If you have oily finger prints like some of the negative reviews I've seen all over your phone ,of course the protector isn't going to stay. So clean phone, then clean it again with the wipe, microfiber and dust sticker. Pop in the alignment tool (without touching the phone with your greasy fingers!), lay the protector on, a quick press, then proceed to the two step part of application. It's a REALLY great way that they've done on how to install this. It really ensures that you're not going to get a bunch of dust or fingerprints trapped. I have one absolutely micro air bubble in my install, we're talking the size of a pinpoint here. I suspect it will work itself out in the next 24 hours. Even if it doesn't, I can't see it unless I look at juuust the right angle. The feel is incredible, truly. It's every bit as good as a tempered glass protector, which I'm shocked about. Fingerprint reader works perfect. Zero issues. So good that I didn't even have to re-register fingerprints after installation. My pre-install prints work with zero issues. For anyone curious, this fits without issue on a S22 Ultra with an Otterbox Defender Pro (Defender as well, as they're identical for the clamshell). It also works fine with the Commuter. Have the case on the phone *before* you put the camera protector on as it's a pretty close fit. So far, I have exactly zero complaints with this screen protector. 4.7 stars. If anything changes over time, I'll update accordingly.

The front screen is rly good and the only reason why I'm not returning the whole package, but the inner screen is very grainy, makes everything look like first touch-screens from the 2000s and the camera cocers look cheap and plasticky

Great instructions to install outer and inner protection

Mi sento di dare cinque stelle perché non ho trovato nulla di negativo, la cover è robusta, gommata, il coso per tenere su il telefono è bello che resistente, e nella scatola ci sono due vetrini che si possono applicare sul telefono (ovviamente non tutti e due in sieme ma al massimo se se ne stacca uno ci metti il secondo che viene dato nella confezione) comunque funziona be e anche il magnete che sta nella cover, che si attacca molto bene al supporto per le macchine. E comunque il supportino per tenere il telefono inclinato è resistente perché è realizzato tutto in metallo. Pienamente soddisfatto anche più di quanto mi aspettassi, perché comunque con dieci euro si può avere un'ottima cover e anche vetrini (che al momento non ho applicato sul telefono e non ve li posso recensire)

The package is awesome the price and the quality and ease of intalation is unmatched compare to similar other products.I mange to get the screen protector installed without any single bubble and with very professional touch.

De screenprotector is niet vlak en trekt zich los met als gevolg vuil tussen de protector en telefoon. Dit bij alle in het pakket. De lens protector versplinterd ipv van barsten, gevolg splinters die de camera lens kunnen beschadigen.