PRESS IN BOTTLE ADAPTER 24MM BAG20

Excellent product that seems to fit multiple sizes of bottles. When my daughter was sick I would get so angry when using the Zarabes cough syrup bottle because you had to stick the syringe down in the bottle of thick sticky medicine, it inevitably ended up making such a mess. I noticed some bottles came with this type of fitting and tried for awhile to pull them out of the empty bottles, then I figured you had to be able to buy those little things somewhere...of course they are on Amazon (isn't everything?). I measured my bottle and it was 22mm on the outside diameter, even though these said 24mm I took a chance and they fit perfectly. It seems that the outer rings are flexible enough that they could like fit a small variety of sizes. I can report that these fit wonderfully in the Hylands Cough Syrup bottles, and would likely also fit the Zarabes bottles. These are such a great addition to our medicine cabinet, just hate that it took me so long to learn about them!

These fit perfectly in my daughter's CVS prescription bottle. I can't imagine I can remove and reuse since it was a very tight fit, but that was expected. These work well with slip tip syringes, like the ones CVS provides with the medicine. I also purchased Care Touch oral dispensers with caps that have a straight tip, and they are a close fit - not perfect, but there really isn't any leakage.

Just as advertised

They fit inside the bottle perfectly. I can use a syringe to keep the pediatric dose accurate. No more juggling bottle and medicine cup. No drops or spills.

I bought these for use in a prescription bottle for a child, and they do fit into the neck. They also fit many children's medication bottles, i.e. Advil, Tylenol, etc. They allow a slip-fitting syringe (non-threaded type) to draw medication with the bottle inverted. If you draw a bit too much and push it back in with the bottle inverted, these will leak around the edges (and I'm talking .2cc or so, not a huge amount, that will cause leaking). The one drawback of these is the size of the flange at the top--the part that keeps them from falling into the bottle. It is big enough in diameter that it catches on the inside of the child-proof cap for the medicine bottles, and unless you're very careful, the adapter gets pulled out by the cap when you unscrew it. You can trim the flange a bit with scissors or a razor knife, but I have a strong feeling that the 22mm size would be spot-on, and will order those next since the cost is so low. These are a wonderful accessory--you'll wonder how you ever got by without them!

Fit all the store bought bottles like liquid Zyrtec, Tylenol and Motrin, Zarbees. Don't have to fight with the bottle or the pharmacy for a while! Bag was sliced open and 1 out of the whole bag was missing but still not a bad deal

I am unable to return these, and they are unusable. product is not as described. The stoppers I purchased before were completely sealed at the top so when you turn the bottle upside down no liquid would spill out. You would have to press the syringe into the top in order to open the valve. These have a huge hole in the center which is bigger than the syringe I use so I can't draw the medicine out of the bottle without it spilling out. Go with the other brand "do-it safe" or "safe seal" They cost more but they can be used a couple times and work great.

These are made of a more rigid plastic than adaptors I have purchased in the past so they don't seal or form to the neck of the bottle well. When tipped upside-down they leak around the adaptor and make a mess. Also, the syringe is difficult to insert due to the hardess of the plastic. My bottle opening is about 19mm and the adaptors ARE tight and require adequate pressure for insertion and are difficult to remove, so they ARE large enough; I believe the design and material are the issue here. Also the ring parts of the adaptor that are pliable or contort when pressed into place are too short. Some adaptors have more of the flexible part, and softer plastic, ensuring a better seal and more uniform pressure around the inside neck of the bottle. However, that being said, if cost is your main determining factor and you do not mind the mess, these might be a good buy. They're certainly better than nothing.