Husky Liners — Front & Rear Mud Guards | Fits 2019-2024 Ram 1500 w/Out OEM Fender Flares - Black, 4 Pc | 58146

These fit my 2019 Ram 1500 Big Horn perfectly! I do not have the fender flares so ordered the "without flares" version. There is no gap as others have experienced. I think they may have the Limited trim which I understand is slightly different. These were super easy to install and used the factory holes/screws. There is a double stick tape that supposedly holds them to the trim better but they came unstuck almost immediately despite cleaning and holding pressure. The kit comes with some small trim mounting brackets that you could drill a small hole into the plastic trim to hold them better (instead of the tape) but honestly I have not seen a need to do that. I thought that you would have to remove the little existing splash guard but these just fit right around them. So far they appear very durable and should last as long as I own the truck!

The mud guards fit my 2020 Ram 1500 perfectly. The included double-sided tape was sufficient for the front guards but it fell on a gap in the plastic on the rear guards. Luckily, I had some heavy double-sided tape available to add to the flap in a place where it would make contact with the wheel well. Overall, it was very easy to install and they look great. It took me around 20-30 minutes to install all 4 guards. Note: Be sure to purchase the correct set. There are two options. One is for truck equipped with fender-flares and one without. I believe the fitment issues in some reviews are likely attributed to this.

I have the DT body style with factory wheel liners. Everything fit fine with a couple small complaints. 1. The instructions say to use a 7/32 socket. No, the bolts have 5/16 heads. 2. As others have mentioned, the paint protector strips for the rear fenders are not cut correctly. Or at all. Whatever is stamping these out is broken and doesn’t make any cut . Easy enough to get out some scissors and do it yourself though. Fronts were fine. Overall, still simple to install, fit well, and look like they were meant to be there.

They fit good and very happy how well it came out. You use existing holes so you do not have to drill into the metal fender. There is an extra screw and clip to add support. I recommend using it, but you connect it to the fender liner not any metal portion of the truck. The only negative I had was it did not come with ppf sticker. Seems like it will be durable and covers with great protection. I got the “used” or “damaged” one that was cheaper. It had no damage to it and was not installed.

Hopefully this helps someone else who runs into this issue…5th Gen 2020 Ram Big Horn 4x4 6” lift on 35x12.5x20 tires…Got it all installed. Product looked great! Then did a couple full lock turns and noticed my tires rubbed. Thought about returning them but that wouldn’t solve my problem of throwing rocks and mud up the side of my truck, so I decided to try and trim it. In my pics you’ll notice that the previous owner trimmed the stock mud flaps (I’m assuming they rubbed) but it didn’t affect the husky flaps or its installation. After looking closely I decided to cut upward from the bottom almost in line with the vertical notch for the stock mud flap and then follow the curve of the husky flap through to the end. Since I followed the natural curve, it doesn’t seem to stand out much. On the screw side of the mud flap, I added the included screw near the push pin to pull the flap further from the tire and added another screw where the 4th screw is supposed to go (silver screw—I’ll dab it with some paint later—the included double sided tape is horrible so I suggest planning on screwing it in). Did this on both sides and now I can keep them on, turn fully and will have clearance even going over bumps. The rears went on perfectly btw.

easy to install and so far work well and look nice

I like the front guards. The rear do not fit properly. I contacted Husky, and they said the 2019 RAM (New model Without Fender Flares) have a few variants that make their guards not line up correctly.. The surprise to me is that they don't accommodate the few variants. I read a lot of reviews before purchasing and do not recall anyone having the same issue, so that leads me to believe that there are likely 2 variants. (1) beginning of 2019 production and (1) late 2019 production. - Pic One: Rear guard with adhesive that falls into liner void. Just held on for the picture. - Pic Two: Rear instructions with pictures of clips with missing holes. Problem #1 (Front). Adhesive will not make full contact with inner liner. Almost 2/3 of the adhesive makes contact. The rest of it falls into a void in the liner. Not a big deal, a clip and screw were supplied by Husky. It is a simple modification. I recommend doing it rather than relying on just the adhesive alone. In my opinion, they should have never said no installation required. I find it hard to believe you wouldn't have issues down the road with just the adhesive. Those are my feelings. Problem #2 (Rear). The area with the adhesive and starter screw hole fall into a void in the liner where 100% of the adhesive does not make contact with the liner. The adhesive is under the pre-marked hole on the liner shown in the attached picture. The screw isn't long enough if you try to install where the hole mark is located The clips they sent don't even have holes in them. I am not sure how this gets past QC. I have so many projects in my life, that it would be nice if Husky valued my time just a little. Do me the service of at least returning my phone call or email and just say some tools / assembly required. I would have given 4 starts for the material, but customer service and engineering just brought down the score to 3 stars. I will now make my own screw / back holder combination and drill to the left where the liner makes flush contact. Thanks Husky for the no tools required install.

Shipped on time. Fit was perfect for 2022 Ram 1500 no fender flares. Very easy and fast to install.

Fit perfectly

Good price, easy install, fit and look perfect on 5th gen ram..

Topp passt nicht nur super, ist sogar früher gekommen als angegeben, Klasse!

These flaps were perfect, easy to install on my 2021 ram 1500 sport, look great, great quality, no issues at all 👍👍

Cost half the OEM one, they are a bit short but to are good enough if you want a sporty look.