Alinsea for Mate 20 Pro Screen Protector Tempered Glass [3D Glass] [Full Adhesive] [Lifetime Replacement Warranty][Case friendly][Support Fingerprint Reader] [Fast Response] for Huawei Mate 20 Pro

I have bought this product twice, the first time worked like a charm. Don't get me wrong I was quite worried pouring liquid glue all over my brand new 800 quid phone, but after looking for a curved tempered glass screen protector elsewhere couldn't find one, so thought I'd give this a whirl. On first fitment it went straight on, glue spread nicely, no bubbles, not too much excess glue, cured quickly, Bob's your uncle, piece of cake.Fast forward a couple of months and I dropped my phone, face down, from about waist height, onto a tiled floor. The screen protector cracked but did it's job, the actual screen was still gleaming. The protector peeled off nicely, no sticky residue or anything and the screen still looked brand new. So I ordered a 2nd protector without a another thought.I thought the second time would be a whirl seeing as how well things went the first time but I was sadly mistaken. I think where I went wrong this time was the table I was fitting it on wasn't bang on level, so when I poured the liquid glue on the phone it slowly rolled straight off the side before I had chance to peel the protective film off the new glass and lay it on. By the time I placed on the new glass there wasn't enough glue on the screen to spread evenly to the corners, I tried tilting my phone to spread the glue (as per instructions) but there just wasn't enough left. So I went for a full abort before the curing process, and just lifted the glass off instead of trying to stick it down with what was left of the glue.The glue was fairly straight forward to mop up with kitchen towels off the table and all off my phone and left no marks or residue behind, but in all the mess I manged to get quite a bit on my hands, which after about 5 minutes began to burn a fair bit. After washing my hands several times the burning stopped after about an hour and I still have all my skin. Partly my own fault I suppose but it would have been nice to get a little warning somewhere on the packet, as I probably would have wore some gloves.Anyway to wrap up if you manage to get the installation right it's a good screen protector, protects from scratches and saved my phone from a hefty drop, but installation itself is not an easy 2 minute thing, and the glue is burney burney.

I think for the Huawei mate 20 pro, this is the best you'll get in the form of screen protection on the market at the moment.I've used it for the past 5 months so I have a few points for any potential buyers:- when you remove the screen protector it doesn't leave any sticky residue on the phone and it doesn't damage the screen. I was worried when it came that the glue would somehow damage the phone screen, but it doesn't. My screen post removal is pristine.- fingerprint sensor is affected but it isn't unusable. The glass is fairly thick so as with any screen protector the finger print is affected. If you use the face unlock it's never really a problem and if it doesn't get it first time it will usually after 2 or 3.- the reason I removed it was because it had collected a fair few scratches and cracks which made the screen very difficult to read in the sun outside. It also started to lift slightly and form an air bubble in the top left, I think I applied it pretty well but it could have been my fault. Mentioning it because I think if anyone bought one, you'd have to look at replacing it every 6 to 9 months. I'm a pretty heavy phone user, putting it in and out my pocket probably 50 time a day. If you used a phone less, maybe you'd be ok.It's definitely saved my screen from cracking on one occasion so has been worth the downsides in my opinion. The glue is excellent and it does provide a good adhesive all over the screen.

Fair to say I'm Rating the Alinsea Screen Protector for Huawei Mate 20 Pro as the 2nd purchase of the same..#1: Whilst installing the first (following the clear concise instructional video), the provided fluid dispensed as described onto the screen.. however, even on my perfectly flat working surface, the fluid drops gathered together & quickly reached critical mass to overcome the surface inertia of the highly polished, curved glass screen.. promptly ejecting half the quantity onto the cloth beneath.. the remaining now insufficient to adhere the screen fully to all edges..Essentially happy with the product & application process, I reordered a second protector - clearly an updated version arrived & I was pleased to see a larger tube of the adhesive....Removing the 1st was a little tricky.. stuck reassuringly firmly, gentle levering results in it cracking & breaking considerably, but it did eventually come off cleanly..#2: The experience of the first application suggested too much fluid in the one spot (as recommended) would have similar results - My decision was to dispense the liquid in 2, 3 & then 4 drops along the length of the screen with a small enough masses not to overcome the friction of the screen - glass protector lowered gently onto the drops resulted in it's satisfying spread of the fluid, as they joined & continued their progress to all edges, corners (& slightly beyond), but the excess can easily be caught with the provided cleaning cloth & wipes, whilst the excellent protective sticky sheet amply protects any ports & delicate openings..The liquid is suitably fluid to allow adjustment until you're happy with it's position - once satisfied, however, it remains mobile for a fair while so DO use the UV lamp to initially fix the edges in place, as recommended, with a final few moments sweeping the length of the screen to 'set' the adhesive - it works really well & very quickly!Result : a protector so clear, smooth & well matched to the screen's profile, you'd barely notice it's there except for the light edge around the notch for the camera & ear piece..Seems tough, secure & crystal clear - Really pleased with it..