TURBO SII Pair 7 Inch Round Black Led Headlights With DRL Hi/lo Beam For Jeep Wrangler JKU Jk Tj CJ TJ Harley Davidson MAC R Peterbilt Kenworth H4-H13 Adapter

These headlights are amazing for such a great price. Extremely easy install, the box comes with two LED headlights, two H4 to H13 cables and two HID Warning Cancelers. You just plug everything together and that is it, the hardest part of the install was finding a place to put all the wires behind the grille. I bunched them all up and taped them together so they would not be dangling around; all together connected is about the size of an average fist. Additionally, I did not notice any major "flicker" when I connected everything without the HID Warning Canceler in my garage but I decided to connect it anyway to avoid any future possible problems. I did notice some minor flickering when I was stopped at a light 4 ft behind a truck's tailgate, but nothing noticeable when driving.These headlights look amazing on the Jeep and visibility at night is so much better than the stock ones.

I wrote this review after I got the lights... they have been awesome, but after driving through some heavy rain one of the lights has condensation on the inside. Maybe I just got a bum set, because otherwise they have been bright and look great. Have to return... these are less than 60 days old! *****I have a 2015 Jeep Wrangler Unlimited Sahara Edition. These replacement LED headlights were easy to install and are super bright. You need to undo a few screws, undo the rivets that hold the grill on, unscrew the existing lights and install the new LEDs. They are plug and play (make sure you have the included anti-flicker adapter plugged in), but you will need some electrical or duct tape to hold the connector in place with the OEM Jeep connector. It doesn’t snap in. It might come loose otherwise.Aside from looking amazing and really sharp--the difference of lighting at night is phenomenal!!! The low beams are bright and light up the whole road. The high beams are extremely bright—like having a small piece of the sun installed on your Jeep! Totally a ”must-have” on your Jeep and easily worth the money! Great purchase!NOTE: I’m a paying customer and have had no contact with Amazon or the seller. I made this review on my own!Turbo SII Pair 7 Inch Round Black Led Headlights With DRL Hi/lo Beam For Jeep Wrangler Jk Tj Harley Davidson MACK R Peterbilt Kenworth Freightliner

Knocked 2 stars for the quality of the connectors and the length of the cable for the DRL.After 10 minutes of not being able to fully insert the H13 connector that goes to the Jeep Harness, took it off and compared it against the original bulb. As you can see in the picture, the original connector guides are narrower at the end and the the mating connector inside guides will not let it in. I filed the whole end of the guide 5mm back. It will now let the connector fully in, but as the guides are not there anymore the lock will not engage. Just Zip tied both connectors and hoped for the best.In that same intermediate harness the H4 connector is really cheaply made, even with the terminals correctly aligned, one of the terminals in the connector went out when pushing the lamp connector in. As the terminals are new, just pushed it in and expect no disconnections.And the last issue I found is that the length of the 4th wire that comes out of the lamp that is for DRL, is way too short. it goes out just about 3/4 of an inch out of the jacket they are in.Visually they look really nice, I have not used them yet at night, but you can tell they are BRIGHT. I always drive with lights on, and even during the day I can see the light reflection on the car in front. I will check alignment tonight on my way home.I read some other posts saying they have to be realigned as they up more than stock bulbs.All in all, I liked the lights. But the quality of the connectors is far from OK.

Very happy with these lights. From a standpoint of going from stock to these LEDs is substantial. Pair them with the fog lights I listed below for an overall great look!There is a difference between appearance and functionality and why the 1 Star deduction.Appearance is great, 5 Star, and the added DRL really adds an updated look for the Wrangler. In addition, I painted the chrome trim rings black to match the lights housing.Functionality (light pattern) is not quite what I expected, but for the price I am fine with it after some simple adjusting. The beam pattern on these lights is very wide and very tall, not quite what you see on OEM headlights. You will need to adjust these down considerably using the same T15 torgue driver used to install them. The brights are not all that helpful, and really look like to focused spot beams. The lights came with Anti-flicker devices, but the lights had some noticeable flicker after installing them, I went ahead and replaced them with the Truck-Lite - link below.DRL: This is really a must.1. Purchase a "Add a Circuit Line Car Mini ATM Blade Fuse Tap Holder". The 2015 Wrangler JKU uses the mini type fuse and I would assume 07- 16 does as well, but you should double check before purchasing the tap.2. Open your fuse box in the engine compartment. There is an empty slot that was wired for "Rear Seat Heater" look at what slot this is(the fuse layout under the lid will tell you).3. Plug the Add a Circuit tap into the empty slot and this will provide power only when the ignition is on. I used a 10 Amp fuse in the tap, which should be plenty for these small LED DRLs. Note: the top slot in the Circuit Tap is for the new load (DRLs) the bottom slot is for an existing load, but since this slot is empty it is not required to add an additional fuse.4. Tap into the new LED headlights DRL wire (white bare wire) and run each side to the new Circuit Tap. I ran the drivers side light along the frame across the firewall and around to the fuse box. The passenger side is just a short run to the fuse box, I have Jeep OCD and soldered the wires at the LEDs and at the fuse tap, but you could use wire connectors as well.Sample Add a Circuit Tap:http://www.amazon.com/gp/product/B014VNFFVA?keywords=fuse%20add%20a%20circuit%20mini%20ATM&qid=1455134888&ref_=sr_1_8&sr=8-8The Truck-Lite was a direct plug and play for gaining anti-flicker and the conversion from H4 to H13. No flicker!http://www.amazon.com/gp/product/B00F50T8GM?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00I paired these headlights with LED fog Lights:http://www.amazon.com/gp/product/B00V7NEPYG?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00Overall, been running these lights for more then a year now and still very happy with them. No issues, no flickering, light output is good, and again huge difference from stock Wrangler headlights if you are purchasing for your Jeep. Well worth the money and nice upgrade for the Wrangler.Note: I am not compensated in any way, I write honest reviews from my actual experience from using the product in an effort to give back for all the product reviews that have helped me make a good purchase. If you found this review helpful, note it below. Also, I respond to comments if there is a question.