ANYCUBIC Water Washable 3D Printer Resin 2.0, 405nm High Precision 3D Resin, Low Shrinkage Photopolymer Resin for 4K/8K/12K Capable LCD DLP Resin 3D Printer (Grey + Grey, 2000g)

I’m somewhat new to 3D printing, and I opted for an Anycubic Photon Mono M5S Pro to start. At first, I found cleaning standard resin a bit tedious, so I decided to give Water Washable resins a try.The difference is night and day. No more mess when cleaning prints, washing the print bed, or the resin tank. It’s extremely fast and simple (cleaning everything with standard resin used to take me around 45 minutes, but with Water Washable resin, it takes just about 5-10 minutes). The color is clean, although UV light gives it a slightly yellowish tint (which personally doesn’t bother me). It’s very durable, easy to use, and its print quality is excellent.I really like this type of resin, and I think I’ll stick with it from now on. It also saves me a lot of time and money on alcohol!

Very nice resin, low odor, but still has a decent smell so either have a fume extraction hood or designated space outside. Cures well and washes off easily. Good gray color that easily shows detail when you are trying to paint. So far everything that has come out clean is very durable. Had a few issues with misprinting but I believe it to be the printer and not the resin.

It has almost no odor. Much better than regular resin.Water washable is true. I can take it to the sink and wash it off with just water, rather than soaking in alcohol or using a sonic cleaner.It’s thinner than regular resin, so if it spills, it cleans up easier. It also doesn’t leave behind a residue on the counter until wiped away with alcohol or some other cleaner.Prints are very sharp. There’s no difference between this and regular resin in terms of print sharpness. However, prints are more brittle, so you need to take that into account when deciding on the thickness of the supports at the touch points of the model. If the supports are too thick, it can gouge out pieces when breaking off the supports.TIP: When leveling the build plate, you have to get a little closer to the fep paper than you would with regular resin, or the first layer may not adhere properly.I’m very excited about this product! I’ll definitely continue to use it.

I decided to try this resin because I was tired of having to purchase so much isopropyl alcohol. The prints turned out great, it picks up a ton of detail and works just as well as normal resin. The durability is the same. Unfortunately has the same smell as normal. The value is great also. I have been able to make a ton of projects. I can't say much about the color, it seems accurate to what the describe but I usually get gray since I paint everything anyway. It does clean with water, but does seem to leave a tacky feel to the print. But feels fine after curing. So I ended up using a tiny isopropyl to help clean but it saves me alot from what I normally used.

i'm a novice printer and wouldn't have wanted to deal with the waterfalls of IPA to clean traditional resin, so this water washable version was an attractive choice. i knew i needed to find out about the print quality before spending money on it myself, so i did what every conscious consumer should do: i watched youtube reviews. two of the more critical reviewers i watched did a side-by-side comparison of this resin to traditional non-water versions, and the difference in print quality was negligible/undetectable. so i purchased this.i was not only surprised by how easy it was to use, i was surprised i didn't experience as fierce an odor as most 3d printing afficionados warn of. there's an odor, sure, but i work near a fan and a window, so it's no problem for me. i use a respirator just because it's recommended, but i really feel i don't have to, because the odor is only present, not overwhelming.as for print quality, i have no complaints. some of the thinner edges require some caution, but that's normal for 3d printing resin. the rest of the object is sturdy, and doesn't compromise on small details. i kid you not, i'm able to print the same brushed aluminum texture on 1/24 wheels as they appear in the 3d renderings from the online source where i got the print file. at the same time, this resin is capable of printing glossy surfaces, as well as surfaces that are meant to be textured enough to not require scuffing before painting and priming. that's a delightful surprise!i can't say enough about the cleanup. running water (as well as anycubic's washing/curing machine) make it easy enough to clean that i don't dread the process. that was the one aspect of 3D printing that would've turned me off, but i don't have to worry about that with this resin. i ended up liking the 1st bottle enough that i went through it and bought a second. i can now comfortable say i swear by it.as for the cured product, everything hardens exactly as you'd expect. the objects i print aren't meant to be bullet proof, they're just meant to fit the model, and they do. i haven't had anything long enough to speak on the shrinkage rate, though i'm sure information on that is available somewhere else already.overall i have no complaints about this resin and i'm satisfied enough to not consider buying any other type from any other brand.

I just started resin printing so I was a bit worried that the smell would overcome my small work area. This Anycubic resin just doesn't sell that bad at all. I have not tested the water washability of the final models since my wash station is setup with an Alcohol wash, the alcohol does a good job of cleaning the prints.The curing process was equally good. I printed a decent sized model and cured it for 10 minutes, then turned it on its side to cure the bottom for an additional 5 minutes. The final print came out great. I'm used to filament based printing, and even with decent quality settings, you don't always get the smoothest surfaces due to the way the filament deposits itself.My resin print was fantastic. The smooth surfaces are smooth, and the details really stand out. What's not to love about this filament. Excellent print quality with very little shrinkage, very little odor, and a really good price. And the water wahability is a nice feature if you don't want to have to invest in alcohol for your print washing.