Boltza CV Boot Clips Stainless Steel for Axle Joint, CV Boot Clamp, CV Boot Repair Kit, 25-50mm and 40-110mm, Set of 2 Pairs (4 Clamps)

Good quality worked well

Really strong clips and as good as the manufacturer type. A cv boot joint had come loose and got bent on the drive shaft. Replaced with one of this set. Checked after 1000 miles and still exactly as fit. Great item set and good price too.

The clamps are possibly very good but a slight oversight on my part made me get these without realising the issue I would immediately face upon their arrival. You need special pliers to crimp them together tightly. Yes I know I could try other tools but that's often met with several failures before achieving a good result and that's just false economy.They are stainless steel and are quite sharply cut at the edges, they certainly don't have rolled/raised angle edges to prevent cutting into the rubber like several of the hose clips I have used in the past.If you have the tool then these are reasonably priced for a small quantity but as I say I cant tell if they work because I don't yet have the tool to test them.

Really easy to fit and the tool is a must. Re-fit my driveshaft boot with ease.

A nice double set of CV clips, if like me you have a classic car that's used heavily you'll not be new to rebuilding CV's. I've been through a good few and I'm happy to report these seem the higher end of the quality scale. A word or warning with these you ideally need a set of CV clip pliers, they crush and squeeze the square portion on the clip to really tighten the clip on the boot. You can do it with some cut off pliers but be careful and the end result is sometimes not the best.When have a great range of size I always cut the excess that I don't need off to help make the job a little neater. The teeth on these clips are nice and large and strong so engaged well on the opposing holes.Good product that I'll more then likely need to reorder in the future.

One of the hose clips has snapped on my car. Fortunately it wasn't anything critical but the problem I was having is every clip I saw was a little to wide to fit in the rubber slots. These clips were however perfect, they seem to be a little narrower than other hose clips and this worked well for me.That said they are sturdy, robust and easy to fit. They do the job perfectly. So, all in all very happy.

ProsGreat Stainless Steel CV Boot Clips - 0.75mm Thick, there are some on the Market that are only 0.5mm Thick and are a lot Weaker.The Stainless Steel must be Good Stainless Steel as it is Not Magnetic at All.At Just Over a pint of Lager in the Pub , I think this is Good Value for a Set of 4 Clips.TOP TIP.**********There is a Special Tool to Fit these , see YouTube for details , But you can use a pair of Pincers that are normally used for removing Nails from Wood.ConsNone .I Hope this Helps .Best Regards B.H.

Cheap and cheerful and gets the job done.Not much to say about these other than they seem well made and do what they say on the tin.Easy to use if you know what your doing and for £4.95 that's a great price.Recommended? Yes absolutely 👍

Snabb leverans! Bra grejer.