Philips Water Ontap Filter AWP3703/10 MICROFILTRATION, 1000 L filtration capacity, reduces chlorine, sediment, and other taste-impacting substances, White

A pain to put on but once one it seems like it’s doing the job! However it is a big large in size, if it was smaller would’ve been perfect

This product simply doesn’t stay on. I’ve tried all the fittings, and the one that fits my tap doesn’t feel secure at all. As soon as the device clips on, the whole thing falls off. The design is absolutely useless. I have a standard mixer tap, the kind you'd find in many UK homes, and it still doesn’t work. Very disappointing and not worth the purchase.

You get 5 tap adapters and a key to tighten the adapter you need after removing the old nozzle on your tap, do this first then twist open the filter casing anti clockwise to remove the plastic packaging on the filter, once you've put the filter back into the device pull the catch anti clockwise and click it firmly onto the new adapter on your tap, push the button to go onto unfiltered and run the tap for 5 seconds, it will flush the filter(do this each day to keep it clean and prevent clogging), push the button to go back onto filtered, set the current month on the dial so you know when to replace the filter. i could taste the difference immediately, no more metallic after tastes in your water, nice product, good value & compact unlike some other versions i have seen.

After the installation of the product, the water from my tap is visibly clearer and has a different more neutral taste. I have left a 4-star review (would give 4.5 if possible) as I had to modify the seal in order to get the filter attached to my current tap, even with all the options given, which was not ideal.

The filter works well, but be prepared for it to fall off.The screw-on fitting has short threads and is made from a flexible plastic that doesn't give a rigid fit to the threads.As the filter unit fixes rigidly to the fitting the slightest movement can easily cause it to fall off.The rubber grommet is also too thick which doesn't even allow the fitting to engage properly with the threads. I replaced it with the grommet from the mixer I replaced, which allowed it to get a grip, but also allows it to leak. I tried using some silicone sealant to seal the threads, but it still leaks and occasionally falls off.The filter works well, but the mounting fixture is useless.

The media could not be loaded. PlasticNot a water softnerActive carbon for odour and Cl. Non-refillable cartridge.Being plastic it always leaks regardless of how much tape one uses to insulate it. It also can’t screw completely as it skips on the last thread. Since it is locked to the tap connector if you twist the filter left ir right you are basically screwing/unscrewing it from the tap.If you manage to screw it tight enough and don’t move it and you don’t use it while tap is open all the way, it may be for you. Otherwise I can’t recommend the product purely on sturdiness!

The media could not be loaded. Works as it says on the box.My faucet was slightly too small to use the flush fittings provided so I had to use the metal tie which does the job (also supplied in the box)The filter cartridge is easy to get to and quick to remove.My water flow reduced compared to without the filter (including unfiltered mode) so something to bear in mind for others.

I was very excited to receive this product, as I wanted a portable filter for travelling, and on the face of it, this seemed ideal, compact and easy to install and remove. However, it is not as well made as I would have hoped. Whilst the tap connector for snuggly, when the unit was attached (via a simple click mechanism), and the tap turned on, water sprayed everywhere. Despite several attempts and adjustments, it simply wouldn’t create a water tight seal.Can’t recommend anything other than Amazon’s refund policy !