Memomad Functional Bali Bed with plenty of Storage - Maple, 135x190cm, Double Bed

Found this bed very poor quality. I purchased it based on the good reviews but it's very disappointing. It's very cheap light pine stained to look more expensive. Arrives in 4 boxes which all need to be emptied to find the parts. Some parts are numbered some aren't so you just have to guess but it's not to difficult to work out if your used to flat pack and DIY. So, starting to put it together, the boards are warped, they don't sit flush, the dowels don't fit neatly they are loose, the holes for the dowels are not aligned, therefore the parts don't sit square leaving gaps. If you try and tighten the screws more to rectify these issues as advised by the seller, the wood is so soft the screws just break through and become loose. The leather handles are cheap and tacky and the drawers won't hold much, or any weight as they are flimsy. The base is made of 3 units with the slats resting directly on top. One of the units collapsed as many areas where you add a screw there will be a dowel on the other side, compromising and strength in the joins. I have no idea how this bed is allowed to be on the market as I will barely hold it's own weight never mind that of a mattress and person. The seller is quick to blame the buyer however I've since had a joiner look at the bed and the have confirmed the above. This bed is not usable and I'm pursuing a refund.Photos:1. Shows a point where There are two dowels and two screws within millimetres of each other which eventually collapsed in on itself.2. The larger panels are thinner strips of stained pine bonded together, they are warped.3. Dowels are not aligned so pieces cannot be connected together correctly. The advice of the seller here was to screw the screws tighter. Useless if you can't get the dowels to fit never mind the screws in!4. The advice that it was myself at fault and that I'm no screwing the screws hard enough to align warped boards and wrongly drilled towel holes results in the cheap pine splitting.5. A dark photo but you can see again a screw positioned only millimetres from another screw of the same length on opposite sides of the wood. This join also collapsed.

Beautiful bed, well machined although I recommend you are a big fan of puzzles or flat pack, as this was over of the most complex pieces of flat pack furniture I'd ever made (and I've made a lot).

Beautiful bed, excellent quality. Only reason I haven’t given it 5 stars is putting it together was a long and laborious process!

The bed looks great and seems very sturdy once it's fully completed. My mattress fits into it very snug however if you have laminated floor in your room I would suggest installing some of your own stoppers underneath and around the bed, something I will need to do as the bed likes to shuffle around when I lean against my wall. This won't be a problem for those who have carpet. I did this by myself and it took HOURS, so an electric drill will serve you well. When it says two people recommeneded it really does mean that. Patience is key with this one as the instructions do take time to figure out in terms of which boards need to be used (not all of them are numbered). Once it's done I can assume it's easy to disassemble into larger pieces and reassemble due to the structure of the bed. I am very pleased.

There is a significant amount of building, so electric screwdriver very handy. It arrives in four boxes, each box contains parts for either side, bed end and the middle. Looks great once built. Bed is quite high once you have added a mattress.

I love the look and the storage in this bed. Having spent quite some hours building it I still think it's worth the effort! My only disappointment is that it squeaks a little as I move already after just a month or so!

Amazing bed. So so happy with it. Storage is amazing, it’s beautiful and is precisely what I wanted when I ordered it

Unbuildable stews are broken and nothing lined up