ASUSZenWiFi AX6600 Tri-Band Mesh WiFi 6 System (XT8 2PK) - Whole Home Coverage up to 5500 sq.ft & 6+ rooms, AiMesh, Included Lifetime Internet Security, Easy Setup, 3 SSID, Parental Control, White

Update: 3-28-2020. Still having issues with the primary router always connecting with the 5 g network, particularly when it is in the ax mode. Supposedly this system is backward compatible with other adapters but by switching it off the ax mode and then back on a few minutes later then it seems work ok. Shouldn't have to do this Asus. Try to fix it, I can't be the only one who has this issue. Devices generally will connect to the node without any issues.Update: 3-8-2020 I'm finding that some of devices will not connect to the 5 G network when the system is in ax mode. Even if I'm but 5 ft. away. Switch the ax mode off and it will connect both the 2.4 and 5 networks. Go figure. Occasionally I have to switch the ax mode back on to get some other device to connect properly. I often take the device into another room some 15ft or more away and it will connect with the 5G without any issues.???Update: 3-2-2020My Blue Cave node was inconsistent on wifi but excellent with the ethernet so I tried a RT-AC68A as a node and it works great. Both the ethernet and the wifi provide excellent speeds in the basement some 25 feet away. I don't plan on sending it back since I'm very happy with it so far. Have had to make a few adjustments here and there because not all digital devices are "equal". If you don't mind paying up for a system it is pretty hard to beat for setup and performance. One thing to add: when I set up the node I used an ethernet cable from the main router lan to the AC68A wan. For some reason it would not locate it wirelessly.Update: 2-24-2020Went into the wireless in the menu and enabled WIFI Agile Multiband for both the 2.4 and 5g networks. (I disabled the smart connect right out of the box.) It will ask you to change the Protected management Frames also. Did so not knowing what the outcome might be but these changes seemed to help with the issue of the mesh switching between the nodes and the primary router. Also, my phones would not hook up to the primary router sitting 5 ft. away but since the afore mentioned changes that issue is gone and the speeds have been excellent. I added a star to my orignal review since the system is working much better. I sure as hell would like a manual to look at rather than just a quick setup document. If someone out there has some ideas or additional adjustments that can be made I'm all ears.FIRST REVIEW: This is an early impression of my experience so far. 2-pak setup was very easy and straight forward. Had to reset once but couldn't find the reset button until I looked on the very bottom of the router. By the way the wps button is there also. I'm paying for 200 mgb and will get 200 to 260 with my desktop 7 ft away. My motorola z3 play generally gets 140 to 170 depending on where I am. I was getting 160 to 200 in the basement 25 ft. away on a desktop. The all those scores are on wifi.I setup an additional Blue Cave node in the basement (which was another story) and connected to two different desktops with ethernet cables. At times they are ripping along at 230 to 260 or may drop off to 80 to 90 for no apparent reason. I disconnected the cables reconnected and the speeds went up again???? (This issue has vanished after making the above mentioned changes). The app will sometimes show the blue cave is offline yet it is working.I have some similar questions as a few others have had about bothersome issues that have arisen. Will address these later. I finally disabled the ax mode for 2.4 and 5g and it seemed to put some of these issues to rest for awhile. I have had ASUS routers for years and love them along with the menu. These two have me considering going back to my older routers because they were more reliable. I'm not a computer guru but I can handle most of the basic computer issues and projects. We don't buy the hardware to continually reboot, reconnect, and try workarounds to make the systems work.Update: 9-22-2020 Additional thoughts on the zenwifi routers. I've found that I need to keep it in the non-AX mode so all of my cameras, wall plugs, etc will remain connected all of the time. ALSO, THE RESET AND WPS BUTTONS ARE ON THE BOTTOM OF THE ROUTER. Nothing in the instructions that I could see regarding their location so if you are looking for them check the bottom. The wifi range is excellent; the speed is excellent; and the app works very well setting the routers up. I'm paying for 200mbs but I get 260+ download with wifi in the same room and 200+ downstairs in the basement.One additional point: Since the recent updates adding my Blue Cave router to the mesh was much easier than when I first started using the zenwifi XT8 mesh system.

XT8 purchased: September 17, 2022 (1 item) - 2 unitsAX Mini purchased: May 22, 2023 (1 item) - 3 units3,800 sq ftMain modem and router - 2nd floorMain office - basement (beneath 1st floor)Distance: 30 ft between XT8, 10-15 ft between AX Mini'sWhen I first bought the XT8 AX6600 pair, they worked great for the first year. Strong signal, very minimal downtime, good asus interface on both browser and via app. After the first year, started having connection issues. After the first year, there was a small increase in occasional bottle necking, but I attributed it to the possibility of the XT8's and the MX (mini versions) having wifi overlapping. Still would work for weeks, even months, between any noticeable issues.After updating them at the start of May 2024, though, v. 3.0.0.4.388_24621-g9054e31 for the XT8 and v. 3.0.0.4.386_49599-g8352df7 for the AX Mini's, the performance of both units SEVERELY went downhill. The update was security related. Everyday, every hour - sometimes between 4-5 hour spans, but still every day, all nodes would disconnect from the mesh (from each other) and then try to reconnect themselves. Downtime is about 5-10 seconds, but when it happens, it's VERY noticeable, annoying, and f**king stupid. I'd either be working from home, on a call, browsing, streaming, or playing games - especially when in a competitive game - and disconnects would happen randomly at any point in the day and night.If I pay for something that's $300, plus the $200 cost of the mini's, I expect them to last AT LEAST 3 YEARS, preferably 5 years, before any major issues or any need to upgrade. My opinion of ASUS routers and (at least) these routers has gone down the drain and I do not and WOULD NOT recommend them to anyone at this point, despite them being WiFi 6 and fairly powerful routers. ASUS Ai-Mesh is nice... when it works. I tried running the XT8's solo and the AX Mini's solo - same connection issues. Also confirmed that it's not a modem problem, as I ran tests for a couple days via hard-line only from the modem, having it act as the router; no connection issues, couldn't see any problems like with the routers.My daily traffic is about 30 GB.Pic related to when disconnect starts to happen. When it does, it's either you restart and reconnect the whole system, or you wait it out until the issue resolves itself - whatever it is. I've tried:- resetting the whole network from default- swapping main routers between both XT8 and AX Mini- run with AND without Adaptive QoS (prioritization of apps on network)- run with AND without backhaulingSame result, still happens. I blame the May 2024 update - these blow now.