Full Motion TV Wall Mount for Most 26–50 Inch TVs, Max VESA 300 x 300mm, TV Monitor Wall Mount Bracket with Rotation, Swivel, Tilt, Extension and Leveling Adjustment, Holds up to 55 lbs

Verified Purchase. I’m really impressed with this Perlegear TV mount. The viewing angle adjustments are smooth and versatile perfect for when I’m watching from the couch or working at my desk. The quality of the materials and hardware feels very solid, and I appreciate that nothing feels cheap or flimsy. The instructions were detailed and easy to understand, which made installation quick and stress-free. Considering its performance and build, this mount offers excellent value for money.

I was impressed with how straightforward this TV wall mount was to install. The directions were clear, and everything lined up the way it should. The only thing to keep in mind is you’ll want to have a ratchet or the correct hex head driver for the lag bolts—those need to be anchored into studs for proper support, and doing that by hand isn’t realistic. Once mounted, the bracket feels very secure and holds the TV flush and steady. The design makes adjusting and leveling simple, and I’ve had no issues with sagging or movement. It’s one of those products that just works the way you’d hope. Pros: Easy, straightforward installation Sturdy and secure once mounted Keeps TV level and flush to the wall Clear instructions Cons: Requires a ratchet/hex driver for lag bolts (not included) Overall, a great mount that does its job well without fuss. Solid value and performance.

Surprised this is made very well, came together well, easy to hang. Took two to hang TV to unit. It's a big TV. Fits close to wall. At this time I hv No complaints. All n all great product and Price.

Good product, definitely strong enough to hold up my 60" smart tv. Plenty of ways to move and adjust the angle of the tv easily without needing special tools and extra help. It is also small enough to tuck behind out of the way if you want it mounted flat. Instructions do a good job of showing how to attach the tv arms to fit all kinds of tv sizes. For the money it is right in line with general market value while staying well built. Only complaint is that the mounting screws are not built to use a screwdriver, but if you have a decent set of sockets it is no big deal. It is important that you know how to properly hang a tv by using the wall studs, otherwise this thing could be a chuck of steel 1' thick and it would just tear out of the wall. Also, I've seen people complain about the tv "creeping" out of place, if you notice, there are bolts above and below the pivot arms and they can be tightened to get rid of this movement, I recommend doing this WITHOUT the tv mounted.

Fit my Samsung tv perfectly. I mounted my 55in tv into the studs in my wall. Installation was so easy. Price point was under 20$. High quality. Easiest wall mount I have installed.

I mounted a 32” tv to this and it worked perfectly. It is very sturdy and easily moved to optimize viewing. Hardware set was complete and well labeled. Mount attached directly into my tv without needing to use the ears. The included lag bolts attached to the wood wall stud make it super secure. You will need to loosen up the angle pivot to gain clearance to tighten the hanger bolt but everything else is straight forward.

First let me say that I lack the gene that interprets written instructions into an assembled item. These things are hard for me. to do and it takes me a lot longer than it will you. Although the instructions were step-by-step, I couldn't tell which side of the extenders gets attached to the central part. I had to use a magnifying glass on the instructions. (The photos here on this listing are much better, I should have gone back here to look at them.) The manufacturer gives you several bolt sizes and lengths so that you can find the right bolt to fit the back of your TV. And if the bolt that fits is a bit too long, well you get to use a spacer. Spacers are innocent little things but I still wasn't sure how to get them onto the bolt. It will keep the bolt and mount snug together. Regarding the extenders: Don't expect the extenders to be installed symmetrically. It all depends on the size of your TV and where the bolt holes are located on the back of your TV. It'll hold the TV just fine and no one sees the back anyway. So don't tighten the screws of the extenders too tightly because you'll have to adjust them a bit. I borrowed my neighbor's stud finder and to be sure, I drilled a tiny pilot hole. Yes, it was wood. So I used the recommended 5/32 wood drill bit and drilled the two holes. Easy. It was also easy to mount the drywall hanger. Comes with a small leveler. Be sure that you have a 7/16 wrench to screen in the mounting screws. I had only a 1/2 and that did not work. Back to the neighbor's for their 7/16 wrench and that made all the difference. Okay wall attachment is mounted to the stud. Now it was time to hang the TV onto the wall attachment. I like to do things myself but I really should have asked for another set of hands. This is where I broke my sweat. I had to lift my TV a bit higher than y head to center it on the wall mount on these two metal prongs. I could not see what I was doing. I got it there but then realized that I needed these critical two smalls screws to do the final attachment of the TV to the wall mount. Those screws were on the floor and I could not reach them and my dogs do not know how to fetch. So be sure to have those screws ready to use. Once I had them I could do the final turns of the screws. Those two little screws are the key to having the TV attached to the mount. So look at the pictures on this posting, even the box has helpful images. Have the 5/32 drill bit and the 7/16 socket wrench. And a friend if you have to mount the TV up high As I had to use the widest spacers, my TV has a 5" profile from the wall. It still looks great and I am very happy with this mount. Everything seems very sturdy. I used a little twisty wire to attach the excess electric cord length to one of the holes in the extender

I purchased this wall mount in 2024, and it’s still doing its job perfectly. My TV is secure, the mount moves smoothly, and it’s very easy to adjust. Absolutely one of the best TV wall mounts I’ve owned. Highly recommend for anyone looking for a sturdy, full-motion mount.

The package came with screws rusted