VEVOR Pool Handrail, 32 x 22.5 Swimming Pool Stair Rail, 304 Stainless Steel Stair Pool Hand Rail Rated 375lbs Load Capacity, Pool Rail with Quick Mount Base Plate, and Complete Mounting Accessories

Great item makes it easy to get in and out of pool

This works perfect for those hot pool handles, they tend to get very hot in the sun and this works perfectly! You can also reverse the cover so one when side gets faded due to the sun you can reverse it to refresh the look!

It showed up well packed, foam around all the railing to prevent scratching. Heavy and sturdy, it looks like good stainless steel (I will check back later if this "rusts" as others have mentioned). Drill bit provided, that's good. Odd size, just a bit larger than 3/8, smaller than 7/16. I installed it in concrete with a hammer drill--after one hole the drill bit was shot (see photo). After that, I used a 1/8 concrete bit, followed by a 3/8 concrete bit, then used the provided one to finish sizing. Even with that, the expansion tubes required banging in with a hammer.Tip: measure the distance between the holes EXACTLY. The bolts are very tight if the holes are off slightly. I added some WD-40 to ease them in, using a socket wrench, turning slowly to prevent twisting off the bolt head. No way was the provided open end wrench going to work. Once in, it feels very solid. Hopefully it will last in the summer heat.The instructions (see photo) page provided was really just a parts list.UPDATE 7/19/23: Two additional photos. The "rust" showed up--although it wasn't rust. It's almost as if some substance "bled" out from the railing. The first photo (labeled) shows it "dirty", the second after I took a Dobie and some dish detergent to it. Not significant in my opinion--so far.UPDATE Aug. 2024. The protective cover to reduce the temperature of the railing has rotted, no doubt due to sun exposure. See photo.

I had a hard time getting in and out of pool. Husband installed and life became so much easier for me.

If you have access to a hammer drill, then the install won't take long. The supplied drill bit did all four holes, and the supplied anchors worked like a charm! I even miss drilled one hole, and everything still lined up. Take your time and hand tighten all four screws incase your holes area little off. Use a 13mm socket to drive them in and you'll be done in about 45 minutes. I used some anti seize on the screws just incase I need to remove them later.

I ordered this for my husband to install by our jacuzzi steps as after having multiple surgeries it’s gotten more difficult for me to get out of the spa.This was quick and easy to install and as he referred to it, “it was a one beer installation”This has definitely made my life easier, I have recommended this to friends and a couple have even ordered them for themselves. It’s very sturdy, the handrail cover is nice as I live in a very hot dry climate with excessive heat.

Got this rail to replace old one on my inground pool. Does not reach out into the pool very far. When using it to exit the pool you are halfway up the steps before you can grab hold of it. Not good for older people needing help getting out of the pool.

Nice looking railing. Everything OK. Packaging good. Comes with 4 anchors and lag bolts to mount onto pool deck. Ours is (most are) concrete. The masonry bit provided was nowhere near up to the job of drilling the holes needed for the anchors. Using a Makita 18v. hammer drill, made got down maybe 1/4" with 5 minutes of drilling. Switched over to a carbide tipped masonry bit (fortunately had this left over from another job). Night and day. Drilled each hole in 2 minutes or so. Nice idea to provide the bit, but (for our deck concrete at least) need better quality, probably carbide-tipped bit. Otherwise pleased.