Trend Kitchen Worktop Jig for Precise Worktop Joints, Router Jig for Laminate, Solid Timber and Composite Worktops, 700mm, KWJ700

I'm halfway through the fitting of my new kitchen and this has made the job a lot easier. As well as cutting the joints I've used it to cut out the sink hole. It is easy to use with the marked peg holes. Very well made solid tool. This is my first time using a router and template so I appreciated the guide but also the online videos from Trend. I recommend you watch so as to learn what all the peg holes are for. You will need a 30mm guide for your router but I've been working with a very old 1/4 inch budget model and it has been fine. Lots of small cuts and not trying to bite off too much at a time.

Good service

Brilliant product

Some reviews have noted that the locator pegs are loose, well mine are all nice and tight. But some of the countersinks on the peg holes are too shallow causing the pegs to stand proud of the jig and foul the router base plate, had to be cut a little deeper. Otherwise a good jig.

Well worth the money, I had to buy due to completely out of square room to fit a kitchen. You can cut the worktops at normally very difficult angles with ease. Would definitely recommend

This is a must have jig if you're installing your own kitchen and want to have a seamless join between stretches of work-surface. There are cheaper jigs on the market but I decided on the Trend one because it is a name I trust in the Router tools market, and unlike some others this is a strong, durable jig that doesn't flex when in use. Bear in mind that to use a work-top jig it's recommended that you also use a beefy router with a 1/2inch collet - in my case a 2Kw Freud which weighs a fair bit. This Trend jig was absolutely solid. The other bonus is that the instructions that come with it are clear and extensive. Of course its very easy to mess up when using these things, and the last thing you want to do is ruin an expensive worktop, so having good clear instructions is a bonus. Take your time and make sure the router bit is sharp (I hear the pro's buy a new one for each job) and you should get great results. Highly recommended.

Easy to use with clear instruction and very accurate. Would recommend if fitting a kitchen

Absolutely brilliant. It's expensive but built to last. Done a variety of basic cuts, hob cutout, and corner profiles on a 38mm oak worktop and the finish is superb. Just take your time and read the instructions very carefully before ideally practicing on some scrap. Found the corners tough as they require you to balance the router on the edge. Just be careful and remain focused.

Como aficionado al bricolaje ha sido un hallazgo. Me ha permitido subir un nivel en el montaje de encimeras.

Heel goed

Good product useful instructions

Super utile

Flimsy and ruined with router during first use. Not recommended.