Foam Cannon S V3.0 (Thicker Snow Foam Technology) with 1/4 Inch Quick Connector for Pressure Washer, 34 oz Bottle (V3.0 (1/4" Quick Connector) + SOAP Sample)

I've had a few foam cannons before this one. None of them worked like I thought they should so i decided to do some research and found this combo set. Hands down the best foam cannon I've ever used or seen used by anyone I know. first time I used it was easy to assemble. Once I mixed the 1-900ml ratio of the shampoo included and water I was kind of skeptical that it was enough shampoo to get the job done. Let me tell you that lil bit of shampoo the manual tells you to use is more than enough I promise you. When I first went to use it, the foam wasn't sticking and was watery and falling off the car. That was because I turned the top knob all the way down thinking in my head less water = thinker foam. this is totally wrong thinking. I turned that knob up and it became so thick I couldn't believe it. it literally didn't not drip or move the whole 25 mins it took me to wash the car with a Mitt( i used a 2-bucket system with this) . i own a 2023 camara Zl1 and i don't trust anyone to touch my car wash it vacuums it I do it all myself and just from this foam cannon the results i got were incredible. My car has never looked better after a wash even the day i bought it off the lot. This foam cannon is some magic idk why i could never get close to the look i desired before even though i used all the best products and methods of application. In the end the new foam cannon i bought was the best car care purchase i have ever made. Thanks, you guys for your hard work on this foam cannon i can't say enough about it. I'm absolutely completely happy with it and its performance. Also, it is well built i forgot to mention that. Highest quality foam cannon ive bought nothing cheap about any of the parts. I will try to upload some pictures soon, but it's been a rainstorm for me this whole week.

Wow, what a difference! I've been using the MTM Hydro for years and just got used to the design flaws. First it was the bottle that wouldn't stand on its own, that was finally improved, but the fact that I couldn't get more than two or three washes without mixing up some more foam was getting old. I had to adjust it to get a thick foam and thus emptied the bottle too quick. Then I got this MJJC Foam Cannon S V3.0...OMG! This beauty lays down a very rich and thick foam and the best part is I'm getting about ten washes from one bottle. Amazing. It's very easy to set up, but the look and feel of this product just oozes superior design, feel, function and build quality. I gave my two MTM's to my friends that have never had a foam cannon before and bought two of these MJJC's. Which when you think about it, the MTM Hydro may be a good starter cannon, but if you want to go directly to the Porsche (MJJC), then leave the Ford/Chevy to others. It's a no-brainer.

This has got the correct foam spray and adjustments! With the 1.1 orifice they give you for pressure washers with 1800 or less PSI, its perfection. Its a high quality foam cannon for sure and worth the money for pro performance!

Man, what a great tool. Awesome foam that stuck!! And the quantity of foam it applies is great. Even on my big transit van sides it just stayed put. Best ive tried!!

Love this thing! All my neighbour's compliment it on how much foam it makes. "That car disappears!" I was worried theyd ask me to wash there cars next. But needless to say its a solid.quality product 100% recommend for detailers or car enthusiats.

A nice upgrade from the previous version placing it more in line with the original pro model. The components are clearly high quality. Produces a nice foam with my Ego pressure washer even when using solutions that have less foaming ability. The size is typical, but the bottle design has some pros/cons. I like the single turn locking mechanism for the lid, which makes opening and closing much easier and faster. However, the bottle has a small base and is very too heavy, so I have had it tip over onto the concrete a number of times damaging the housing. The thinner bottle does make it easier to manipulate the bottle, but I think I would prefer a broader based bottle to prevent the tip overs. I have also had some issues with leaking from inside the spray housing when the bottle is upside down, like when mixing. I have checked the seals and even reassembled everything with tape at the threads but still leaks from inside the housing somewhere.

This foam cannon is great! Yes, it is very expensive compared to most, but I had a cheap tool daily foam cannon (also from Amazon) and the foam quality and the spray pattern were less than ideal. This mjjc foam cannon works much better. A couple things I really like about: 1. It comes with smaller diameter nozzle for use with pressure washers with a lower gallons per minute (GPM) rating. I'm using an electric pressure washer with 2400 psi and 1.2 GPM and the smaller nozzle definitely helped produce thicker foam. 2. The pick up tube that goes inside the bottle has a weighted stainless steel ball on the end so no matter what angle the bottle is at it never sucks air. It's a small detail that I appreciate. Overall this is a good buy and performs well, I just wish it was a bit less expensive

I’ve been using mid range foam cannons for the last couple years ranging from $30-45 although once I got a new car I decided to upgrade my car detailing equipment. For double the money than the average foam cannon this one is an absolute unit, I could not believe how much it weighed when I took it out of the box, but when using the foam cannon I don’t find it’s weight to be cumbersome at all. It has a weighted soap inlet line which I was looking for but didn’t see in the description, and the amount/spread of foam has tons of adjustment. The foam itself is applied almost to the consistency of shaving cream when using the right soap, there’s absolutely no runny soap or blotchy patches. Overall I’m very impressed with this foam cannon and absolutely recommend it as the right tools always make the job easier.

Great cannon, sprays thick foam. Helpful to have measuring marks to adjust your foam thickness and extra additives.

The weighted suction hose inside the bottle is mint because its allways drawing soap out the bottle no matter what angle your using it on is Foam Cannon out there 👍👍

ممتاز

Nice product, works great with my power washer.

Love the fact the brand already has it inside ready to change a 1.1 orifice so it makes good foam with electric pressure washers Very simple to use and to assemble/disassemble yet has some weight to it but easy to still be held while full tank The tank itself comes in package with extra rubber sealsnt and a quick connect with swivel connection in the version I've got